{"product_id":"rockjock-antirock-sway-bar-kit-universal-45in-bar-18in-aluminum-arms","title":"RockJock Universal 45-Inch Antirock Sway Bar Kit with Aluminum Arms","description":"\u003ch4\u003eBalance custom suspension travel without trail-side disconnects\u003c\/h4\u003e\u003cp\u003eRockJock CE-9902A-18 gives a fabricator the core components for a connected off-road sway bar system. Its heat-treated chromoly bar and billet arms are intended to balance suspension movement for more consistent traction while leaving final placement, link length, and clearances to the engineered custom installation.\u003c\/p\u003e\u003ch4\u003eKey Features\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e45-inch-long, 0.800-inch-diameter 4340 heat-treated chromoly sway bar\u003c\/li\u003e\n\u003cli\u003ePair of 18-inch billet aluminum sway bar arms\u003c\/li\u003e\n\u003cli\u003eAdjustable end links with long threaded rods that may be trimmed for the application\u003c\/li\u003e\n\u003cli\u003eUHMW sway bar bushings and weld-on axle tabs\u003c\/li\u003e\n\u003cli\u003eUniversal fabricator configuration for custom rigs and rock buggies\u003c\/li\u003e\n\u003cli\u003eDesigned to remain connected during off-road suspension articulation\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eFitment\u003c\/h4\u003e\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eApplication\u003c\/th\u003e\n\u003cth\u003eRequired Space\u003c\/th\u003e\n\u003cth\u003eInstallation\u003c\/th\u003e\n\u003cth\u003eRequirements and Exclusions\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\u003ctr\u003e\n\u003ctd\u003eUniversal custom off-road suspension fabrication\u003c\/td\u003e\n\u003ctd\u003e45-inch bar; 43-inch mounting tube; 18-inch arms plus link and tire clearance\u003c\/td\u003e\n\u003ctd\u003eRequires welding and custom bracket placement\u003c\/td\u003e\n\u003ctd\u003eNot bolt-in; verify chassis width, axle tabs, bar rate, arm sweep, link geometry, tire clearance, exhaust, driveline, steering, brake hoses, wiring, and full suspension travel\u003c\/td\u003e\n\u003c\/tr\u003e\u003c\/tbody\u003e\n\u003c\/table\u003e\u003ch4\u003eSpecifications\u003c\/h4\u003e\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eDetail\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eProduct Type\u003c\/td\u003e\n\u003ctd\u003eUniversal Antirock sway bar kit\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSway Bar Material\u003c\/td\u003e\n\u003ctd\u003e4340 heat-treated chromoly\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSway Bar Length\u003c\/td\u003e\n\u003ctd\u003e45 inches\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSway Bar Diameter\u003c\/td\u003e\n\u003ctd\u003e0.800 inch\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMounting Tube\u003c\/td\u003e\n\u003ctd\u003e43 inches long x 1.75 inches O.D. x 0.095-inch wall\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eArm Length\u003c\/td\u003e\n\u003ctd\u003e18 inches\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eArm Material\u003c\/td\u003e\n\u003ctd\u003eBillet aluminum\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBushing Material\u003c\/td\u003e\n\u003ctd\u003eUHMW\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFitment Type\u003c\/td\u003e\n\u003ctd\u003eUniversal fabrication\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003ch4\u003eWhat's Included\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eOne CE-9902J 45-inch chromoly sway bar\u003c\/li\u003e\n\u003cli\u003eOne CE-9902H 43-inch mounting tube\u003c\/li\u003e\n\u003cli\u003eTwo CE-9904-18M 18-inch billet aluminum sway bar arms\u003c\/li\u003e\n\u003cli\u003eTwo adjustable sway bar links\u003c\/li\u003e\n\u003cli\u003eTwo CE-9901D UHMW sway bar bushings\u003c\/li\u003e\n\u003cli\u003eWeld-on axle tabs\u003c\/li\u003e\n\u003cli\u003eCE-99005A hardware pack\u003c\/li\u003e\n\u003cli\u003eWelder, fabrication tools, application-specific brackets, and unrelated chassis hardware are not included\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eAbout RockJock\u003c\/h4\u003e\u003cp\u003eRockJock develops connected Antirock sway bar systems, serviceable Johnny Joints, steering components, and suspension hardware for trail control and articulation. Its universal Antirock kits let qualified fabricators package the same heat-treated bar and serviceable component approach into custom chassis.\u003c\/p\u003e\u003ch4\u003eRelated Parts\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eRockJock universal Antirock installation guidance\u003c\/li\u003e\n\u003cli\u003eApplication-matched shorter or longer end links when the supplied link range is unsuitable\u003c\/li\u003e\n\u003cli\u003eReplacement UHMW bushings and arm hardware for future service\u003c\/li\u003e\n\u003cli\u003eFabricator-selected tube, brackets, and fasteners sized for the engineered chassis loads\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eFAQ\u003c\/h4\u003e\u003cstrong\u003eWhat is the CE-9902A-18?\u003c\/strong\u003e\u003cp\u003eIt is a universal fabrication Antirock sway bar kit with a 45-inch chromoly bar and 18-inch billet aluminum arms.\u003c\/p\u003e\u003cstrong\u003eIs this a bolt-in vehicle-specific kit?\u003c\/strong\u003e\u003cp\u003eNo. It is a completely universal fabricator kit that requires welding, custom placement, clearance checks, and application-specific link setup.\u003c\/p\u003e\u003cstrong\u003eWhat are the sway bar dimensions?\u003c\/strong\u003e\u003cp\u003eThe heat-treated 4340 chromoly sway bar is 45 inches long and 0.800 inch in diameter.\u003c\/p\u003e\u003cstrong\u003eWhat mounting tube is included?\u003c\/strong\u003e\u003cp\u003eThe kit includes a 43-inch-long mounting tube measuring 1.75 inches outside diameter with a 0.095-inch wall.\u003c\/p\u003e\u003cstrong\u003eWhich arms are included?\u003c\/strong\u003e\u003cp\u003eThe package uses a pair of 18-inch billet aluminum Antirock sway bar arms.\u003c\/p\u003e\u003cstrong\u003eCan the end links be shortened?\u003c\/strong\u003e\u003cp\u003eRockJock specifies long threaded link rods that may be trimmed by a qualified fabricator to suit the engineered installation.\u003c\/p\u003e\u003cstrong\u003eDoes an Antirock sway bar need to be disconnected off road?\u003c\/strong\u003e\u003cp\u003eNo. The system is designed to remain connected while balancing front and rear suspension movement off road.\u003c\/p\u003e\u003cstrong\u003eWill handling match a factory sway bar?\u003c\/strong\u003e\u003cp\u003eNo. RockJock warns that an Antirock-equipped vehicle has more body roll and does not provide the same handling characteristics as a factory sway bar.\u003c\/p\u003e\u003cstrong\u003eIs a welder included?\u003c\/strong\u003e\u003cp\u003eNo. The components needed for the kit are listed below, but welding equipment, fabrication tools, and application-specific chassis work are not included.\u003c\/p\u003e\u003ch4\u003eInstallation Instructions\u003c\/h4\u003e\u003col\u003e\n\u003cli\u003eMeasure the chassis and axle through full compression, droop, and steering travel to establish bar, tube, arm, link, tire, driveline, exhaust, hose, and wiring clearances.\u003c\/li\u003e\n\u003cli\u003eVerify the package label and manufacturer part number CE-9902A-18 before cutting or welding any component.\u003c\/li\u003e\n\u003cli\u003eHave a qualified fabricator establish the mounting-tube position, axle-tab location, arm sweep, link angle, and structural reinforcement for the intended vehicle weight and use.\u003c\/li\u003e\n\u003cli\u003eTrim and position the mounting tube only after confirming the sway bar can remain centered and serviceable without binding.\u003c\/li\u003e\n\u003cli\u003eWeld the mounting structure and axle tabs using procedures appropriate for the chassis and axle materials, protecting nearby bearings, seals, hoses, wiring, and finishes.\u003c\/li\u003e\n\u003cli\u003eInstall the UHMW bushings, chromoly bar, billet arms, adjustable links, and supplied hardware according to the current RockJock instructions.\u003c\/li\u003e\n\u003cli\u003eTrim the long threaded link rods only when required, maintaining adequate thread engagement and equal left-to-right geometry.\u003c\/li\u003e\n\u003cli\u003eCycle the complete suspension and steering with the springs or shocks safely unloaded as appropriate, then correct every contact, bind, over-center condition, and hose or wiring risk.\u003c\/li\u003e\n\u003cli\u003eTighten hardware to the applicable specifications, confirm the expected increase in body roll, and reinspect the system after the initial service interval.\u003c\/li\u003e\n\u003c\/ol\u003e\u003cp\u003e\u003cstrong\u003eCalifornia Proposition 65 Warning:\u003c\/strong\u003e Cancer and reproductive harm. See www.P65Warnings.ca.gov.\u003c\/p\u003e","brand":"RockJock","offers":[{"title":"Default Title","offer_id":67970611609679,"sku":"ROKCE-9902A-18","price":727.88,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1062\/7920\/files\/rockjock-ce-9902a-18-universal-antirock-kit-01.webp?v=1793560996","url":"https:\/\/www.blackopsautoworks.com\/products\/rockjock-antirock-sway-bar-kit-universal-45in-bar-18in-aluminum-arms","provider":"Black Ops Auto Works","version":"1.0","type":"link"}