{"product_id":"rockjock-currectlync-ram-assist-tie-rod-clamp-bracket-forged-chromoly-for-42mm-1-5-8in-tube","title":"RockJock 42mm Chromoly Ram Assist Tie Rod Clamp","description":"\u003ch4\u003eAdd a ram mount without dismantling the complete tie rod\u003c\/h4\u003e\u003cp\u003eRockJock RJ-441001-101 is built for Universal ram-assist steering installations using a straight, undamaged 42 mm or 1 5\/8-inch outside-diameter tie rod tube, a compatible 3\/4-inch ram rod-end slot, and a 5\/8-inch mounting bolt. Steering and suspension must cycle fully without contact or binding. Final compatibility depends on matching every dimension, mounting point, moving component, and clearance in the intended suspension system.\u003c\/p\u003e\u003ch4\u003eKey Features\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eTwo-piece forged chromoly clamp installs around the assembled tie rod\u003c\/li\u003e\n\u003cli\u003eFits 42 mm and 1 5\/8-inch outside-diameter tie rod tubes\u003c\/li\u003e\n\u003cli\u003eMachined 3\/4-inch slot accepts common ram rod ends\u003c\/li\u003e\n\u003cli\u003e5\/8-inch ram mounting bolt\u003c\/li\u003e\n\u003cli\u003eGloss black powder-coat finish\u003c\/li\u003e\n\u003cli\u003eNo tie-rod machining required when dimensions and clearance match\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eFitment\u003c\/h4\u003e\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eFitment Type\u003c\/th\u003e\n\u003cth\u003eVerified Application\u003c\/th\u003e\n\u003cth\u003eRequired Checks\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\u003ctr\u003e\n\u003ctd\u003eDimension and system specific\u003c\/td\u003e\n\u003ctd\u003eUniversal ram-assist steering installations using a straight, undamaged 42 mm or 1 5\/8-inch outside-diameter tie rod tube, a compatible 3\/4-inch ram rod-end slot, and a 5\/8-inch mounting bolt. Steering and suspension must cycle fully without contact or binding.\u003c\/td\u003e\n\u003ctd\u003eConfirm exact dimensions, mounting hardware, geometry, loads, articulation, component condition, and full suspension and steering clearance\u003c\/td\u003e\n\u003c\/tr\u003e\u003c\/tbody\u003e\n\u003c\/table\u003e\u003ch4\u003eSpecifications\u003c\/h4\u003e\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eDetail\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eProduct Type\u003c\/td\u003e\n\u003ctd\u003eRam Assist Tie Rod Clamps\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaterial\u003c\/td\u003e\n\u003ctd\u003eForged chromoly steel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTie Rod Tube Diameter\u003c\/td\u003e\n\u003ctd\u003e42 mm or 1 5\/8 inches O.D.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRam Mounting Slot\u003c\/td\u003e\n\u003ctd\u003e3\/4 inch\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRam Bolt\u003c\/td\u003e\n\u003ctd\u003e5\/8-inch-18 x 1 3\/4-inch Grade 8\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOverall Length\u003c\/td\u003e\n\u003ctd\u003e4 inches\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOverall Height\u003c\/td\u003e\n\u003ctd\u003e4 1\/8 inches\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOverall Width\u003c\/td\u003e\n\u003ctd\u003e2 3\/16 inches\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRam Bolt Centerline to Tie Rod Centerline\u003c\/td\u003e\n\u003ctd\u003e1 1\/2 inches\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFinish\u003c\/td\u003e\n\u003ctd\u003eGloss black powder coat\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003ch4\u003eWhat's Included\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eOne front clamp half\u003c\/li\u003e\n\u003cli\u003eOne threaded rear clamp half\u003c\/li\u003e\n\u003cli\u003eEight 5\/16-inch socket-head clamp bolts\u003c\/li\u003e\n\u003cli\u003eOne 5\/8-inch Grade 8 ram mounting bolt\u003c\/li\u003e\n\u003cli\u003eOne 2 ml tube of red threadlocker\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eAbout RockJock\u003c\/h4\u003e\u003cp\u003eRockJock develops connected Antirock sway bar systems, serviceable Johnny Joints, steering components, and suspension hardware for trail control and articulation. Its replacement and universal components are specified by exact dimensions so builders can preserve safe geometry and serviceability.\u003c\/p\u003e\u003ch4\u003eRelated Parts\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eA dimension-matched hydraulic ram and rod end\u003c\/li\u003e\n\u003cli\u003ePressure and return hoses routed for full steering and suspension travel\u003c\/li\u003e\n\u003cli\u003eApplication-rated ram axle bracket and steering stops\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eFAQ\u003c\/h4\u003e\u003cstrong\u003eWhat is the RJ-441001-101?\u003c\/strong\u003e\u003cp\u003eIt is the RockJock ram assist tie rod clamps described in the Specifications table for the stated dimension-based application.\u003c\/p\u003e\u003cstrong\u003eWhich tie rods accept this clamp?\u003c\/strong\u003e\u003cp\u003eUse it only on a straight, undamaged 42 mm or 1 5\/8-inch outside-diameter tie rod tube with sufficient mounting and travel clearance.\u003c\/p\u003e\u003cstrong\u003eMust the tie rod be removed for installation?\u003c\/strong\u003e\u003cp\u003eThe two mating halves are designed to install around the tie rod in the vehicle without sliding the clamp over an end.\u003c\/p\u003e\u003cstrong\u003eWhat ram rod end fits the slot?\u003c\/strong\u003e\u003cp\u003eThe machined slot is 3\/4 inch wide and the supplied Grade 8 ram bolt is 5\/8 inch, but the exact ram joint and misalignment requirements must be confirmed.\u003c\/p\u003e\u003cstrong\u003eCan it be used with high-steer or low-steer layouts?\u003c\/strong\u003e\u003cp\u003eThe clamp is dimension-based and can be oriented in either type of layout when steering geometry, ram stroke, and full-travel clearance are verified.\u003c\/p\u003e\u003cstrong\u003eDoes lift height determine compatibility?\u003c\/strong\u003e\u003cp\u003eNo. Tube diameter, clamp position, ram geometry, steering stops, hose routing, and suspension clearance determine compatibility.\u003c\/p\u003e\u003cstrong\u003eDoes installation require tie-rod machining?\u003c\/strong\u003e\u003cp\u003eNo machining is required when the tube diameter, condition, and available straight clamping area match the stated requirements.\u003c\/p\u003e\u003cstrong\u003eWhy must steering and suspension be cycled?\u003c\/strong\u003e\u003cp\u003eThe clamp and ram must never contact or bind against the axle, differential, frame, track bar, stabilizer, hoses, or other components because that could lock the steering.\u003c\/p\u003e\u003ch4\u003eInstallation Instructions\u003c\/h4\u003e\u003col\u003e\n\u003cli\u003eVerify the package label and manufacturer part number RJ-441001-101 before removing, cutting, or installing components.\u003c\/li\u003e\n\u003cli\u003eInspect the tie rod tube and confirm a straight, undamaged clamping area with the exact 42 mm or 1 5\/8-inch outside diameter.\u003c\/li\u003e\n\u003cli\u003eEstablish the ram body and rod-end mounting points, usable ram stroke, steering stops, hose routing, and clamp orientation before assembly.\u003c\/li\u003e\n\u003cli\u003eClean the tie rod and both clamp bores so oil, rust, coatings, and debris cannot reduce clamping force.\u003c\/li\u003e\n\u003cli\u003ePosition the two clamp halves around the tie rod without trapping hoses, wiring, or debris.\u003c\/li\u003e\n\u003cli\u003eApply the supplied red threadlocker only as directed and tighten the eight clamp bolts evenly using the current RockJock sequence and torque values.\u003c\/li\u003e\n\u003cli\u003eInstall the compatible ram rod end in the 3\/4-inch slot with the supplied 5\/8-inch Grade 8 bolt and the application-required spacers and locking hardware.\u003c\/li\u003e\n\u003cli\u003eWith the vehicle safely supported, cycle steering lock to lock and articulate the suspension through full compression and droop while checking every possible contact and bind point.\u003c\/li\u003e\n\u003cli\u003eBleed and test the hydraulic system, verify steering stops prevent ram overtravel, then reinspect clamp position and fastener torque after initial use.\u003c\/li\u003e\n\u003c\/ol\u003e\u003cp\u003e\u003cstrong\u003eCalifornia Proposition 65 Warning:\u003c\/strong\u003e Cancer and reproductive harm. See www.P65Warnings.ca.gov.\u003c\/p\u003e","brand":"RockJock","offers":[{"title":"Default Title","offer_id":67970615050319,"sku":"ROKRJ-441001-101","price":112.36,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1062\/7920\/files\/rockjock-rj-441001-101-ram-assist-tie-rod-clamps-01.webp?v=1793561194","url":"https:\/\/www.blackopsautoworks.com\/products\/rockjock-currectlync-ram-assist-tie-rod-clamp-bracket-forged-chromoly-for-42mm-1-5-8in-tube","provider":"Black Ops Auto Works","version":"1.0","type":"link"}