{"product_id":"rockjock-jeep-jl-jt-jk-forged-chromoly-steering-stabilizer-shock-tie-rod-bracket","title":"RockJock 42mm Chromoly Steering Stabilizer Clamp","description":"\u003ch4\u003ePosition a stabilizer shock without machining the tie rod\u003c\/h4\u003e\u003cp\u003eRockJock RJ-401001-101 is built for Dimension-based clamp for 42 mm (1.625-inch) tie-rod tubes, including RockJock JL, JT, and JK tie rods. Accepts stock JL\/JT\/JK and most traditional aftermarket stabilizer shocks. Not for ram assist. Final compatibility depends on matching every dimension, mounting point, moving component, and clearance in the intended suspension system.\u003c\/p\u003e\u003ch4\u003eKey Features\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eForged 4130 chromoly two-piece clamp\u003c\/li\u003e\n\u003cli\u003eFits only 42 mm (1.625-inch) tie-rod tubes\u003c\/li\u003e\n\u003cli\u003eAdjustable 0.750- to 1.5625-inch shock mounting gap\u003c\/li\u003e\n\u003cli\u003eReversible bolt and jam-nut arrangement supports clearance\u003c\/li\u003e\n\u003cli\u003eBlack ED-coated bracket halves with zinc-plated hardware\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eFitment\u003c\/h4\u003e\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eFitment Type\u003c\/th\u003e\n\u003cth\u003eVerified Application\u003c\/th\u003e\n\u003cth\u003eRequired Checks\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\u003ctr\u003e\n\u003ctd\u003eDimension and system specific\u003c\/td\u003e\n\u003ctd\u003eDimension-based clamp for 42 mm (1.625-inch) tie-rod tubes, including RockJock JL, JT, and JK tie rods. Accepts stock JL\/JT\/JK and most traditional aftermarket stabilizer shocks. Not for ram assist.\u003c\/td\u003e\n\u003ctd\u003eConfirm exact dimensions, mounting hardware, geometry, loads, articulation, component condition, and full suspension and steering clearance\u003c\/td\u003e\n\u003c\/tr\u003e\u003c\/tbody\u003e\n\u003c\/table\u003e\u003ch4\u003eSpecifications\u003c\/h4\u003e\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eDetail\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eProduct Type\u003c\/td\u003e\n\u003ctd\u003eSteering Stabilizer Brackets\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaterial\u003c\/td\u003e\n\u003ctd\u003eForged 4130 chromoly steel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTie-Rod Diameter\u003c\/td\u003e\n\u003ctd\u003e42 mm (1.625 inches) only\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eShock Mounting Gap\u003c\/td\u003e\n\u003ctd\u003e0.750 to 1.5625 inches\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eShock Bolt\u003c\/td\u003e\n\u003ctd\u003e12 mm-1.75 x 55 mm, grade 10.9\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eJam Nut Height\u003c\/td\u003e\n\u003ctd\u003e7\/32 inch\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBracket Finish\u003c\/td\u003e\n\u003ctd\u003eBlack ED coat\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHardware Finish\u003c\/td\u003e\n\u003ctd\u003eClear zinc\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003ch4\u003eWhat's Included\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eOne inner tie-rod clamp half\u003c\/li\u003e\n\u003cli\u003eOne outer tie-rod clamp half\u003c\/li\u003e\n\u003cli\u003eOne 12 mm-1.75 x 55 mm grade 10.9 stabilizer bolt\u003c\/li\u003e\n\u003cli\u003eOne 12 mm-1.75 class 10 jam nut\u003c\/li\u003e\n\u003cli\u003eThree 5\/16-inch-18 x 1-inch grade 8 clamp bolts\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eAbout RockJock\u003c\/h4\u003e\u003cp\u003eRockJock develops connected Antirock sway bar systems, serviceable Johnny Joints, steering components, and suspension hardware for trail control and articulation. Its replacement and universal components are specified by exact dimensions so builders can preserve safe geometry and serviceability.\u003c\/p\u003e\u003ch4\u003eRelated Parts\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eRockJock RJ-441102-101 low-steer relocation kit\u003c\/li\u003e\n\u003cli\u003eRockJock RJ-441110-101 high-steer relocation kit\u003c\/li\u003e\n\u003cli\u003eTraditional steering stabilizer shocks with compatible mounting width\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eFAQ\u003c\/h4\u003e\u003cstrong\u003eWhat is the RJ-401001-101?\u003c\/strong\u003e\u003cp\u003eIt is the RockJock steering stabilizer brackets described in the Specifications table for the stated dimension-based application.\u003c\/p\u003e\u003cstrong\u003eWhat tie-rod diameter does the clamp fit?\u003c\/strong\u003e\u003cp\u003eIt fits 42 mm, or 1.625-inch, outside-diameter tie-rod tubes only.\u003c\/p\u003e\u003cstrong\u003eCan it hold a factory Jeep stabilizer?\u003c\/strong\u003e\u003cp\u003eYes. RockJock lists stock JL, JT, and JK steering stabilizer shocks.\u003c\/p\u003e\u003cstrong\u003eCan it hold an aftermarket stabilizer?\u003c\/strong\u003e\u003cp\u003eIt accepts most traditional aftermarket stabilizer shocks when the adjustable mounting gap and clearances match.\u003c\/p\u003e\u003cstrong\u003eCan it be used with ram assist?\u003c\/strong\u003e\u003cp\u003eNo. RockJock specifies this bracket for traditional stabilizer shocks only.\u003c\/p\u003e\u003cstrong\u003eDoes the tie rod need machining?\u003c\/strong\u003e\u003cp\u003eNo. The two-piece clamp installs without machining or modifying the tie rod.\u003c\/p\u003e\u003cstrong\u003eCan the clamp be rotated?\u003c\/strong\u003e\u003cp\u003eYes, but the final orientation must preserve clearance through full steering and suspension travel.\u003c\/p\u003e\u003cstrong\u003eIs another relocation bracket needed on JL or JT applications?\u003c\/strong\u003e\u003cp\u003eYes. RockJock states that JL and JT installations also require relocating the stabilizer's opposite end with an application-appropriate bracket.\u003c\/p\u003e\u003ch4\u003eInstallation Instructions\u003c\/h4\u003e\u003col\u003e\n\u003cli\u003eVerify the package label and manufacturer part number RJ-401001-101 before removing, cutting, or installing components.\u003c\/li\u003e\n\u003cli\u003eConfirm the tie rod measures exactly 42 mm (1.625 inches) outside diameter and the shock is a traditional stabilizer, not ram assist.\u003c\/li\u003e\n\u003cli\u003eChoose an orientation that provides clearance at full steering lock and throughout suspension travel.\u003c\/li\u003e\n\u003cli\u003ePlace the two forged clamp halves around the clean tie-rod tube.\u003c\/li\u003e\n\u003cli\u003eInstall and evenly tighten the three grade 8 clamp bolts using RockJock's current procedure.\u003c\/li\u003e\n\u003cli\u003eUse the shock bolt and jam nut to set the mounting gap without side-loading the shock bushing.\u003c\/li\u003e\n\u003cli\u003eFor JL and JT applications, install the required opposite-end relocation bracket.\u003c\/li\u003e\n\u003cli\u003eCycle steering and suspension completely, correct any contact or binding, then torque and reinspect the hardware after initial use.\u003c\/li\u003e\n\u003c\/ol\u003e\u003cp\u003e\u003cstrong\u003eCalifornia Proposition 65 Warning:\u003c\/strong\u003e Cancer and reproductive harm. See www.P65Warnings.ca.gov.\u003c\/p\u003e","brand":"RockJock","offers":[{"title":"Default Title","offer_id":67970614755407,"sku":"ROKRJ-401001-101","price":57.65,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1062\/7920\/files\/rockjock-rj-401001-101-steering-stabilizer-brackets-01.webp?v=1793561445","url":"https:\/\/www.blackopsautoworks.com\/products\/rockjock-jeep-jl-jt-jk-forged-chromoly-steering-stabilizer-shock-tie-rod-bracket","provider":"Black Ops Auto Works","version":"1.0","type":"link"}