{"product_id":"rywire-obd0-main-relay-kill-switch-harness","title":"Rywire OBD0 Main Relay Upgrade and Kill Switch Harness","description":"\u003ch4\u003eReplace the failure-prone factory relay and add a removable start inhibit\u003c\/h4\u003e\u003cp\u003eRywire RY-RELAY-OBD0 plugs into the factory main-relay connector on early OBD0 Honda and Acura vehicles. The harness replaces the Honda-specific relay with a standard automotive-grade relay and adds an isolation toggle that can be disconnected as a simple vehicle-security measure without cutting or splicing the original wiring.\u003c\/p\u003e\u003ch4\u003eKey Features\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003ePlug-and-play connection to the supported factory OBD0 main-relay connector\u003c\/li\u003e\n\u003cli\u003eUses a replaceable standard automotive-grade relay\u003c\/li\u003e\n\u003cli\u003eRemovable isolation toggle interrupts the main-relay circuit\u003c\/li\u003e\n\u003cli\u003eNo cutting or splicing is required for the verified connector application\u003c\/li\u003e\n\u003cli\u003eInstallation is reversible when the original relay configuration is retained\u003c\/li\u003e\n\u003cli\u003eOBD0 version is distinct from Rywire's separate OBD1\/OBD2 harness\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eApplication details and restrictions\u003c\/h4\u003e\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eApplication Type\u003c\/th\u003e\n\u003cth\u003eVerified Requirement\u003c\/th\u003e\n\u003cth\u003eExclusions\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\u003ctr\u003e\n\u003ctd\u003eInterface-specific\u003c\/td\u003e\n\u003ctd\u003eEarly \/ pre-1992 Honda or Acura with the matching OBD0 factory main-relay connector\u003c\/td\u003e\n\u003ctd\u003eNot the OBD1\/OBD2 version. Confirm the actual connector against Rywire's OBD0 images before ordering.\u003c\/td\u003e\n\u003c\/tr\u003e\u003c\/tbody\u003e\n\u003c\/table\u003e\u003ch4\u003eSpecifications\u003c\/h4\u003e\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eDetail\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eManufacturer Part Number\u003c\/td\u003e\n\u003ctd\u003eRY-RELAY-OBD0\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProduct Type\u003c\/td\u003e\n\u003ctd\u003eMain relay upgrade and kill-switch harness\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInterface\u003c\/td\u003e\n\u003ctd\u003eHonda \/ Acura OBD0 factory main-relay connector\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVehicle Era\u003c\/td\u003e\n\u003ctd\u003eEarly \/ pre-1992 applications with matching OBD0 connector\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRelay\u003c\/td\u003e\n\u003ctd\u003eStandard automotive-grade replacement relay\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSecurity Control\u003c\/td\u003e\n\u003ctd\u003eRemovable isolation toggle\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInstallation\u003c\/td\u003e\n\u003ctd\u003ePlug and play; no cutting or splicing stated\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003ch4\u003eWhat's Included\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eOne OBD0 main-relay upgrade harness\u003c\/li\u003e\n\u003cli\u003eOne standard automotive-grade relay\u003c\/li\u003e\n\u003cli\u003eOne removable isolation toggle \/ kill switch and its jumper connection\u003c\/li\u003e\n\u003cli\u003eThe separate OBD1\/OBD2 harness, tools, mounting hardware not supplied by Rywire, and unrelated chassis wiring are not included\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eAbout Rywire\u003c\/h4\u003e\u003cp\u003eRywire Motorsport Electronics develops engine, chassis, adapter, and relay harnesses for performance vehicles. Its main-relay upgrade separates the OBD0 and OBD1\/OBD2 connector families so the installed chassis interface must be confirmed before ordering.\u003c\/p\u003e\u003ch4\u003eRelated Parts\u003c\/h4\u003e\u003cul\u003e\u003cli\u003eNo external or internal harness is linked because the correct companion wiring must be selected by the actual OBD generation, factory connector, chassis condition, and electrical plan.\u003c\/li\u003e\u003c\/ul\u003e\u003ch4\u003eFAQ\u003c\/h4\u003e\u003cstrong\u003eWhat is the RY-RELAY-OBD0?\u003c\/strong\u003e\u003cp\u003eIt is the OBD0 version of Rywire's plug-and-play main-relay upgrade and removable isolation-switch harness.\u003c\/p\u003e\u003cstrong\u003eWhich vehicles use this version?\u003c\/strong\u003e\u003cp\u003eRywire identifies the OBD0 version for early Honda and Acura vehicles; confirm the factory connector shown in the manufacturer images before ordering.\u003c\/p\u003e\u003cstrong\u003eWill it fit a 1992-or-later OBD1 or OBD2 vehicle?\u003c\/strong\u003e\u003cp\u003eNo. Rywire specifies the separate OBD1 version for 1992-and-later OBD1 vehicles, and that version also supports OBD2 applications.\u003c\/p\u003e\u003cstrong\u003eDoes installation require cutting the factory harness?\u003c\/strong\u003e\u003cp\u003eNo. Rywire describes the correct-version installation as plug and play at the factory main-relay connector.\u003c\/p\u003e\u003cstrong\u003eWhy replace the original Honda relay?\u003c\/strong\u003e\u003cp\u003eThe harness substitutes a common automotive-grade relay for the harder-to-source Honda-specific main relay, a known failure point on older vehicles.\u003c\/p\u003e\u003cstrong\u003eHow does the isolation switch work?\u003c\/strong\u003e\u003cp\u003eDisconnecting the removable toggle interrupts the main-relay circuit so the vehicle cannot start normally until it is reconnected.\u003c\/p\u003e\u003cstrong\u003eIs this a complete alarm system?\u003c\/strong\u003e\u003cp\u003eNo. It is a removable relay-isolation switch and should be treated as one layer of vehicle security, not a replacement for a complete alarm or immobilizer system.\u003c\/p\u003e\u003cstrong\u003eWhat must be checked before installation?\u003c\/strong\u003e\u003cp\u003eConfirm OBD generation, connector shape, terminal condition, wire integrity, relay location, mounting clearance, and the absence of prior wiring modifications.\u003c\/p\u003e\u003ch4\u003eInstallation Instructions\u003c\/h4\u003e\u003col\u003e\n\u003cli\u003eConfirm the vehicle uses the early Honda or Acura OBD0 main-relay connector shown by Rywire and is not an OBD1\/OBD2 application.\u003c\/li\u003e\n\u003cli\u003eDisconnect the battery according to the vehicle service information and locate the factory main relay in a dry, serviceable area.\u003c\/li\u003e\n\u003cli\u003eInspect the connector and surrounding wiring for heat damage, corrosion, loose terminals, or previous modifications before adding the harness.\u003c\/li\u003e\n\u003cli\u003eDisconnect the original relay and plug the upgrade harness into the matching factory connector without forcing or repinning it.\u003c\/li\u003e\n\u003cli\u003eSecure the standard relay and route the removable isolation toggle away from heat, abrasion, pedals, steering components, and sharp edges.\u003c\/li\u003e\n\u003cli\u003eReconnect the battery, verify normal fuel-pump prime and starting with the switch connected, then verify the intended no-start condition with it removed.\u003c\/li\u003e\n\u003cli\u003eCorrect any electrical fault before road use and retain access to the relay for future service.\u003c\/li\u003e\n\u003c\/ol\u003e","brand":"Rywire","offers":[{"title":"Default Title","offer_id":68233165242447,"sku":"RYWRY-RELAY-OBD0","price":53.74,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1062\/7920\/files\/rywire-ry_relay_obd0-obd0-main-relay-kill-switch-harness-1000-01.webp?v=1795035040","url":"https:\/\/www.blackopsautoworks.com\/products\/rywire-obd0-main-relay-kill-switch-harness","provider":"Black Ops Auto Works","version":"1.0","type":"link"}