{"product_id":"seibon-14-lexus-is250-350-f-sport-op-style-carbon-fiber-front-lip","title":"Seibon 14 Lexus IS250\/350 F Sport OP-Style Carbon Fiber Front Lip","description":"\u003ch4\u003eLightweight carbon fiber front lip for the 2016 Lexus IS200t, 2014 Lexus IS250, 2016 Lexus IS300\u003c\/h4\u003e\n\u003cp\u003eThe Seibon FL14LXIS-OP is a hand-laid 3K 2x2 twill weave carbon fiber over a fiberglass skeleton front lip built specifically for the 2016 Lexus IS200t, 2014 Lexus IS250. The UV-resistant gloss clear coat is factory-applied and ready to install. At up to 50% lighter than the OEM steel equivalent, it reduces unsprung weight for measurable gains in acceleration, braking balance, and cornering response.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFront-End Aerodynamics:\u003c\/strong\u003e Redirects airflow under the front bumper to reduce front-end lift, improve stability, and sharpen high-speed response.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e3K 2x2 Twill Weave Construction:\u003c\/strong\u003e Hand-laid carbon fiber over a fiberglass backbone provides the right balance of rigidity and flex for road use.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGloss Clear Coat:\u003c\/strong\u003e Factory-applied UV-resistant finish shows clean carbon weave without any painting required.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOEM Bumper Compatibility:\u003c\/strong\u003e Designed to mount beneath the stock front bumper using OEM clips or included hardware with no cutting required.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSeibon Fitment Guarantee:\u003c\/strong\u003e Verified against the target vehicle; length tolerance within 3\/8 inch of stock bumper edge for seamless integration.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMotorsport Proven:\u003c\/strong\u003e Same construction trusted by Seibon's racing customers since 2003.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eThis Part Fits\u003c\/h4\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eYear Range\u003c\/th\u003e\n\u003cth\u003eMake\u003c\/th\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003cth\u003eTrim\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e2014-2015\u003c\/td\u003e\n\u003ctd\u003eLexus\u003c\/td\u003e\n\u003ctd\u003eIS250\u003c\/td\u003e\n\u003ctd\u003eF Sport\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2014-2020\u003c\/td\u003e\n\u003ctd\u003eLexus\u003c\/td\u003e\n\u003ctd\u003eIS350\u003c\/td\u003e\n\u003ctd\u003eF Sport\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2016\u003c\/td\u003e\n\u003ctd\u003eLexus\u003c\/td\u003e\n\u003ctd\u003eIS200t\u003c\/td\u003e\n\u003ctd\u003eF Sport\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2016\u003c\/td\u003e\n\u003ctd\u003eLexus\u003c\/td\u003e\n\u003ctd\u003eIS300\u003c\/td\u003e\n\u003ctd\u003eF Sport\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch4\u003eSpecifications\u003c\/h4\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eDetail\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003ePart Number\u003c\/td\u003e\n\u003ctd\u003eFL14LXIS-OP\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eUPC\u003c\/td\u003e\n\u003ctd\u003e887753480101\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaterial\u003c\/td\u003e\n\u003ctd\u003e3K 2x2 twill weave carbon fiber\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFinish\u003c\/td\u003e\n\u003ctd\u003eGloss UV-resistant clear coat\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConstruction\u003c\/td\u003e\n\u003ctd\u003eHand-laid with fiberglass skeleton\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight Savings\u003c\/td\u003e\n\u003ctd\u003eUp to 50% lighter than OEM equivalent\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHardware\u003c\/td\u003e\n\u003ctd\u003eUses OEM mounting hardware; not included\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWarranty\u003c\/td\u003e\n\u003ctd\u003eSeibon 6-month limited clear coat warranty; fitment guarantee\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch4\u003eWhat's Included\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e1x Seibon carbon fiber front lip\u003c\/li\u003e\n\u003cli\u003eMounting hardware (where applicable)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eInstallation\u003c\/h4\u003e\n\u003col\u003e\n\u003cli\u003eGather tools: panel pop tool, Phillips screwdriver, 10mm socket, and body panel clips.\u003c\/li\u003e\n\u003cli\u003eJack up the front of the vehicle safely and remove undertray panels if needed to access the bumper lower mounting points.\u003c\/li\u003e\n\u003cli\u003eIdentify the OEM lower bumper mounting clips or screws along the bottom edge of the front bumper.\u003c\/li\u003e\n\u003cli\u003ePre-fit the lip against the bumper edge without fastening to confirm alignment. Seibon recommends pre-fitting before any modification.\u003c\/li\u003e\n\u003cli\u003eStarting from the center, attach the lip using OEM-style push clips or the supplied hardware. Work outward toward each corner.\u003c\/li\u003e\n\u003cli\u003eDo not overtighten. Carbon fiber mounting flanges can crack under excessive torque.\u003c\/li\u003e\n\u003cli\u003eVerify the lip sits flush and level across the full bumper width before final tightening.\u003c\/li\u003e\n\u003cli\u003eLower the vehicle and inspect the ground clearance. Minimum 4 inches of clearance is recommended to avoid curb strikes.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch4\u003eFrequently Asked Questions\u003c\/h4\u003e\n\u003cstrong\u003eWill this lip clear speed bumps and parking curbs?\u003c\/strong\u003e\n\u003cp\u003eGround clearance depends on your vehicle's ride height. On a stock-height vehicle, most Seibon lips provide adequate clearance for normal driving. Lowered vehicles may experience scraping. Measure your current bumper-to-ground clearance before purchasing.\u003c\/p\u003e\n\u003cstrong\u003eDoes this require any cutting to the OEM bumper?\u003c\/strong\u003e\n\u003cp\u003eNo cutting is required on properly fitting Seibon lips. The lip mounts beneath the factory bumper edge using existing clip locations or supplied hardware. Always pre-fit before making any modifications.\u003c\/p\u003e\n\u003cstrong\u003eDoes it come with mounting hardware?\u003c\/strong\u003e\n\u003cp\u003eSome Seibon lips include mounting hardware; others use the OEM clip locations. Check the product-specific fitment notes. Aftermarket push clips in the 6-8mm range are widely available and work well.\u003c\/p\u003e\n\u003cstrong\u003eCan I paint this to match my car?\u003c\/strong\u003e\n\u003cp\u003eYes. The clear-coated carbon surface accepts paint after light sanding and primer application. For a carbon show look, no paint is needed.\u003c\/p\u003e\n\u003cstrong\u003eWhat is the warranty?\u003c\/strong\u003e\n\u003cp\u003eSeibon provides a fitment guarantee covering lips that fall more than 3\/8 inch shorter or longer than the factory bumper edge, and a 6-month clear coat warranty. Under the Magnuson-Moss Warranty Act, this product does not void your vehicle's factory warranty on unrelated components.\u003c\/p\u003e\n\u003cstrong\u003eHow do I clean and protect the carbon finish?\u003c\/strong\u003e\n\u003cp\u003eWash with mild soap and a microfiber cloth. Apply UV-protectant wax regularly. The underside of the lip is exposed to road debris, so inspect periodically for chips or cracks and address any damage promptly to prevent moisture intrusion.\u003c\/p\u003e\n\u003cstrong\u003eWill this fit if my bumper has been repainted or repaired?\u003c\/strong\u003e\n\u003cp\u003eSeibon fitment is guaranteed for unmodified, accident-free US-spec vehicles. Vehicles with body damage history or non-factory bumper repairs may require adjustment for proper fitment.\u003c\/p\u003e\n\u003cstrong\u003eIs professional installation recommended?\u003c\/strong\u003e\n\u003cp\u003eAn experienced DIY enthusiast can install a front lip with basic hand tools. For best results, Seibon recommends someone familiar with carbon fiber component handling.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eWARNING:\u003c\/strong\u003e This product can expose you to chemicals including lead and phthalates, which are known to the State of California to cause cancer and reproductive harm. For more information go to www.P65Warnings.ca.gov.\u003c\/p\u003e","brand":"Seibon","offers":[{"title":"Default Title","offer_id":40699192737871,"sku":"SEIFL14LXIS-OP","price":900.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1062\/7920\/files\/seibon-14-lexus-is250350-f-sport-op-style-carbon-fiber-front-lip-seibon.jpg?v=1771962847","url":"https:\/\/www.blackopsautoworks.com\/products\/seibon-14-lexus-is250-350-f-sport-op-style-carbon-fiber-front-lip","provider":"Black Ops Auto Works","version":"1.0","type":"link"}