{"product_id":"seibon-2022-subaru-wrx-h-style-carbon-fiber-hood-scoop-1in-taller-than-oem","title":"Seibon 2022 Subaru WRX H-Style Carbon Fiber Hood Scoop - (1in. Taller Than OEM)","description":"\u003ch4\u003eLightweight carbon fiber hood vent for the compatible vehicles\u003c\/h4\u003e\n\u003cp\u003eThe Seibon HDS22SBIMP-H is a hand-laid 3K 2x2 twill weave carbon fiber over a fiberglass skeleton hood vent built specifically for the compatible vehicles. The UV-resistant gloss clear coat is factory-applied and ready to install. At up to 50% lighter than the OEM steel equivalent, it reduces unsprung weight for measurable gains in acceleration, braking balance, and cornering response.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFunctional Heat Extraction:\u003c\/strong\u003e Vented design allows hot air to escape from the engine bay, reducing underhood temperatures for improved intake efficiency.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e3K 2x2 Twill Weave:\u003c\/strong\u003e Precise hand-laid carbon construction matches the factory hood contour with a show-quality gloss finish.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLightweight Addition:\u003c\/strong\u003e Carbon fiber adds virtually no weight while adding functional heat management and aggressive styling.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOEM Hood Compatible:\u003c\/strong\u003e Designed to mount in the factory hood vent opening or as a surface-mount addition to specific hood styles.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSeibon Fitment Guarantee:\u003c\/strong\u003e Test-fit and verified against the target vehicle.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShow-Ready Gloss:\u003c\/strong\u003e UV-resistant clear coat requires no painting.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eSpecifications\u003c\/h4\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eDetail\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003ePart Number\u003c\/td\u003e\n\u003ctd\u003eHDS22SBIMP-H\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaterial\u003c\/td\u003e\n\u003ctd\u003e3K 2x2 twill weave carbon fiber\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFinish\u003c\/td\u003e\n\u003ctd\u003eGloss UV-resistant clear coat\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConstruction\u003c\/td\u003e\n\u003ctd\u003eHand-laid with fiberglass skeleton\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight Savings\u003c\/td\u003e\n\u003ctd\u003eUp to 50% lighter than OEM equivalent\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHardware\u003c\/td\u003e\n\u003ctd\u003eUses OEM mounting hardware; not included\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWarranty\u003c\/td\u003e\n\u003ctd\u003eSeibon 6-month limited clear coat warranty; fitment guarantee\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch4\u003eWhat's Included\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e1x Seibon carbon fiber hood vent or scoop\u003c\/li\u003e\n\u003cli\u003eMounting hardware where applicable\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eInstallation\u003c\/h4\u003e\n\u003col\u003e\n\u003cli\u003eGather tools: panel pop tool, Phillips screwdriver, drill and appropriate bit (if no pre-cut opening exists), painter's tape.\u003c\/li\u003e\n\u003cli\u003ePre-fit the vent against the hood surface to confirm alignment and mark mounting hole locations.\u003c\/li\u003e\n\u003cli\u003eIf the hood requires cutting for the vent opening, use a jigsaw with a fine-tooth blade. Seal all cut edges with super glue or edge sealer to prevent delamination.\u003c\/li\u003e\n\u003cli\u003eApply silicone sealant around the perimeter mounting flange to seal against water intrusion.\u003c\/li\u003e\n\u003cli\u003eSecure the vent using the supplied hardware. Torque to 6-8 Nm maximum.\u003c\/li\u003e\n\u003cli\u003eAllow silicone to cure 24 hours before washing.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch4\u003eFrequently Asked Questions\u003c\/h4\u003e\n\u003cstrong\u003eDoes this require cutting the hood?\u003c\/strong\u003e\n\u003cp\u003eSome hood vents require cutting an opening in the OEM hood. Always pre-fit and confirm the installation requirements for your specific vehicle before cutting. Seibon recommends professional installation when cutting is required.\u003c\/p\u003e\n\u003cstrong\u003eIs a heat shield still needed with a vented hood?\u003c\/strong\u003e\n\u003cp\u003eYes. Vents help manage underhood heat but do not eliminate it entirely. A heat shield on the underside of the hood is still recommended, especially on turbocharged and high-output vehicles.\u003c\/p\u003e\n\u003cstrong\u003eWhat is the warranty?\u003c\/strong\u003e\n\u003cp\u003eSeibon provides a fitment guarantee and a 6-month limited clear coat warranty. Under the Magnuson-Moss Warranty Act, this product does not void your vehicle's factory warranty.\u003c\/p\u003e\n\u003cstrong\u003eDoes it come painted or in raw carbon?\u003c\/strong\u003e\n\u003cp\u003eThe vent comes with a UV-resistant gloss clear coat applied over the carbon weave. No painting is required for the carbon look.\u003c\/p\u003e\n\u003cstrong\u003eCan I install this at home?\u003c\/strong\u003e\n\u003cp\u003eInstallations that use existing clip or screw locations are DIY-friendly. If cutting is required, Seibon recommends professional installation to ensure clean, sealed cuts.\u003c\/p\u003e\n\u003cstrong\u003eWill this affect the hood's structural integrity?\u003c\/strong\u003e\n\u003cp\u003eSeibon hood vents are engineered to maintain hood rigidity. The fiberglass skeleton supports the panel around the vent opening. Follow torque specifications to avoid over-stressing the mounting flanges.\u003c\/p\u003e\n\u003cstrong\u003eHow do I clean the vents?\u003c\/strong\u003e\n\u003cp\u003eUse a soft detailing brush and mild soap to remove debris from vent channels. Apply UV-protectant wax to the carbon surface after washing.\u003c\/p\u003e\n\u003cstrong\u003eIs this product street legal?\u003c\/strong\u003e\n\u003cp\u003eBuyers are responsible for verifying compliance with applicable state and local regulations.\u003c\/p\u003e","brand":"Seibon","offers":[{"title":"Default Title","offer_id":42716277506127,"sku":"SEIHDS22SBIMP-H","price":585.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1062\/7920\/files\/seibon-2022-subaru-wrx-h-style-carbon-fiber-hood-scoop-1in_-taller-than-oem-seibon.jpg?v=1771968531","url":"https:\/\/www.blackopsautoworks.com\/products\/seibon-2022-subaru-wrx-h-style-carbon-fiber-hood-scoop-1in-taller-than-oem","provider":"Black Ops Auto Works","version":"1.0","type":"link"}