{"product_id":"seibon-2022-toyota-gr86-mb-style-carbon-fiber-rear-spoiler","title":"Seibon 2022 Toyota GR86 MB-Style Carbon Fiber Rear Spoiler","description":"\u003ch4\u003eLightweight carbon fiber spoiler for the compatible vehicles\u003c\/h4\u003e\n\u003cp\u003eThe Seibon RS22TY86-MB is a hand-laid 3K 2x2 twill weave carbon fiber over a fiberglass skeleton rear spoiler built specifically for the compatible vehicles. The UV-resistant gloss clear coat is factory-applied and ready to install. At up to 50% lighter than the OEM steel equivalent, it reduces unsprung weight for measurable gains in acceleration, braking balance, and cornering response.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eAerodynamic Downforce:\u003c\/strong\u003e Engineered blade and base geometry increases rear downforce and reduces lift at speed, improving stability during hard cornering.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e3K 2x2 Twill Weave Construction:\u003c\/strong\u003e Hand-laid carbon fiber over a fiberglass core delivers structural rigidity at a fraction of OEM plastic weight.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGloss Clear Coat Finish:\u003c\/strong\u003e UV-resistant factory-applied clear coat protects the weave pattern and requires no painting.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTrunk Lid Mounting:\u003c\/strong\u003e Installs directly to the trunk lid using pre-drilled holes and OEM-style hardware for a clean, integrated look.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSeibon Fitment Guarantee:\u003c\/strong\u003e Tested against the target vehicle before production to ensure proper mounting point alignment.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTrack and Street Ready:\u003c\/strong\u003e Trusted by Seibon's global motorsport customer base for over two decades of competition use.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eSpecifications\u003c\/h4\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eDetail\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003ePart Number\u003c\/td\u003e\n\u003ctd\u003eRS22TY86-MB\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaterial\u003c\/td\u003e\n\u003ctd\u003e3K 2x2 twill weave carbon fiber\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFinish\u003c\/td\u003e\n\u003ctd\u003eGloss UV-resistant clear coat\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConstruction\u003c\/td\u003e\n\u003ctd\u003eHand-laid with fiberglass skeleton\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight Savings\u003c\/td\u003e\n\u003ctd\u003eUp to 50% lighter than OEM equivalent\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHardware\u003c\/td\u003e\n\u003ctd\u003eUses OEM mounting hardware; not included\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWarranty\u003c\/td\u003e\n\u003ctd\u003eSeibon 6-month limited clear coat warranty; fitment guarantee\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch4\u003eWhat's Included\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e1x Seibon carbon fiber rear spoiler\u003c\/li\u003e\n\u003cli\u003ePre-drilled mounting holes where applicable\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eInstallation\u003c\/h4\u003e\n\u003col\u003e\n\u003cli\u003eClean the trunk lid surface thoroughly before installation.\u003c\/li\u003e\n\u003cli\u003ePosition the spoiler on the trunk lid and verify alignment with the pre-drilled mounting holes.\u003c\/li\u003e\n\u003cli\u003eMark the mounting hole locations with a paint marker through the spoiler base.\u003c\/li\u003e\n\u003cli\u003eIf the trunk lid is not pre-drilled, use a center punch and drill bit sized to the included hardware (typically 8-10mm).\u003c\/li\u003e\n\u003cli\u003eApply silicone sealant around each mounting hole to prevent water intrusion.\u003c\/li\u003e\n\u003cli\u003eSet the spoiler in place and secure with the supplied or OEM-spec mounting hardware from underneath the trunk lid.\u003c\/li\u003e\n\u003cli\u003eTorque to 8-10 Nm. Do not overtighten on carbon fiber mounting flanges.\u003c\/li\u003e\n\u003cli\u003eAllow silicone to cure for 24 hours before washing the vehicle.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch4\u003eFrequently Asked Questions\u003c\/h4\u003e\n\u003cstrong\u003eDoes this spoiler require drilling into the trunk lid?\u003c\/strong\u003e\n\u003cp\u003eMany Seibon spoilers are designed to use the trunk lid's existing OEM mounting holes. If no pre-drilled holes exist, minor drilling will be required. Always pre-fit before any drilling or modification.\u003c\/p\u003e\n\u003cstrong\u003eDoes it come with mounting hardware?\u003c\/strong\u003e\n\u003cp\u003eHardware requirements vary by vehicle. Seibon recommends consulting the installation instructions specific to your model. OEM-spec mounting bolts and washers are typically sufficient.\u003c\/p\u003e\n\u003cstrong\u003eWill this affect the functionality of my OEM trunk spoiler or ducklid?\u003c\/strong\u003e\n\u003cp\u003eThis spoiler replaces or supplements the OEM rear spoiler. Check your specific fitment notes to confirm whether the OEM spoiler must be removed first.\u003c\/p\u003e\n\u003cstrong\u003eWhat is the warranty?\u003c\/strong\u003e\n\u003cp\u003eSeibon provides a 6-month limited clear coat warranty and a fitment guarantee. Under the Magnuson-Moss Warranty Act, aftermarket spoiler installation does not void your vehicle's factory warranty on unrelated systems.\u003c\/p\u003e\n\u003cstrong\u003eHow do I keep the carbon looking new?\u003c\/strong\u003e\n\u003cp\u003eWash with mild soap and a microfiber cloth. Apply UV-protectant wax after every wash to preserve the clear coat. Avoid high-pressure water directed at the mounting base edges.\u003c\/p\u003e\n\u003cstrong\u003eCan I paint this spoiler to match my car?\u003c\/strong\u003e\n\u003cp\u003eYes. The clear-coated carbon surface can be painted by a body shop after light sanding and primer application. For the carbon look, no painting is necessary.\u003c\/p\u003e\n\u003cstrong\u003eIs professional installation recommended?\u003c\/strong\u003e\n\u003cp\u003eSeibon recommends installation by a professional experienced with carbon fiber body components. For spoilers requiring drilling, a professional ensures proper alignment and prevents damage to the panel.\u003c\/p\u003e\n\u003cstrong\u003eDoes this fit widebody or modified vehicles?\u003c\/strong\u003e\n\u003cp\u003eFitment is guaranteed for unmodified, US-spec vehicles. Seibon does not guarantee fitment on vehicles that have been in accidents or had bodywork outside factory specifications.\u003c\/p\u003e","brand":"Seibon","offers":[{"title":"Default Title","offer_id":42716279242831,"sku":"SEIRS22TY86-MB","price":945.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1062\/7920\/files\/seibon-2022-toyota-gr86-mb-style-carbon-fiber-rear-spoiler-seibon.jpg?v=1771968750","url":"https:\/\/www.blackopsautoworks.com\/products\/seibon-2022-toyota-gr86-mb-style-carbon-fiber-rear-spoiler","provider":"Black Ops Auto Works","version":"1.0","type":"link"}