{"product_id":"seibon-2022-toyota-gr86-subaru-brz-carbon-fiber-fenders-gloss-finish","title":"Seibon 2022 Toyota GR86 \/ Subaru BRZ Carbon Fiber Fenders - Gloss Finish","description":"\u003ch4\u003eLightweight carbon fiber fenders for the compatible vehicles\u003c\/h4\u003e\n\u003cp\u003eThe Seibon FF22TY86 is a hand-laid 3K 2x2 twill weave carbon fiber over a fiberglass skeleton fenders built specifically for the compatible vehicles. The UV-resistant gloss clear coat is factory-applied and ready to install. At up to 50% lighter than the OEM steel equivalent, it reduces unsprung weight for measurable gains in acceleration, braking balance, and cornering response.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSignificant Weight Reduction:\u003c\/strong\u003e Carbon fiber construction eliminates excess mass from the front corners, reducing rotational inertia and improving steering feel.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e3K 2x2 Twill Weave:\u003c\/strong\u003e Consistent hand-laid weave pattern over a fiberglass skeleton provides OEM-grade structural rigidity with a fraction of the weight.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGloss Clear Coat Finish:\u003c\/strong\u003e UV-resistant factory clear coat is show-ready out of the box; no paint prep required for a carbon look.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOEM Mounting Points:\u003c\/strong\u003e Pre-drilled for factory bolt locations, allowing direct replacement of the stock steel fenders with no fabrication.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSeibon Fitment Guarantee:\u003c\/strong\u003e Test-fit and verified against the target vehicle before production.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSold as a Pair:\u003c\/strong\u003e Both driver and passenger fenders included where listed, ensuring a matched weave pattern and consistent finish.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eSpecifications\u003c\/h4\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eDetail\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003ePart Number\u003c\/td\u003e\n\u003ctd\u003eFF22TY86\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eUPC\u003c\/td\u003e\n\u003ctd\u003e887753491244\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaterial\u003c\/td\u003e\n\u003ctd\u003e3K 2x2 twill weave carbon fiber\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFinish\u003c\/td\u003e\n\u003ctd\u003eGloss UV-resistant clear coat\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConstruction\u003c\/td\u003e\n\u003ctd\u003eHand-laid with fiberglass skeleton\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight Savings\u003c\/td\u003e\n\u003ctd\u003eUp to 50% lighter than OEM equivalent\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHardware\u003c\/td\u003e\n\u003ctd\u003eUses OEM mounting hardware; not included\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWarranty\u003c\/td\u003e\n\u003ctd\u003eSeibon 6-month limited clear coat warranty; fitment guarantee\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch4\u003eWhat's Included\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eCarbon fiber fenders (1 or 2 pieces as specified)\u003c\/li\u003e\n\u003cli\u003ePre-drilled for OEM mounting hardware\u003c\/li\u003e\n\u003cli\u003eOEM hardware is reused; new hardware not included\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eInstallation\u003c\/h4\u003e\n\u003col\u003e\n\u003cli\u003eGather tools: 10mm socket, trim removal tool, torque wrench, painter's tape, and a helper.\u003c\/li\u003e\n\u003cli\u003eOpen the hood and tape adjacent body panels (door, bumper, hood edge) with painter's tape to prevent scratching.\u003c\/li\u003e\n\u003cli\u003eRemove the OEM fender liner or splash shield by unscrewing the retaining screws and pulling the liner out.\u003c\/li\u003e\n\u003cli\u003eRemove all fender mounting bolts: along the top under the hood, along the A-pillar edge, and along the lower rocker edge (typically 8-12 bolts total depending on vehicle).\u003c\/li\u003e\n\u003cli\u003eCarefully pull the OEM fender away from the vehicle and set aside.\u003c\/li\u003e\n\u003cli\u003eTransfer any OEM turn signal assemblies, trim pieces, or marker lights to the new carbon fender.\u003c\/li\u003e\n\u003cli\u003ePre-fit the carbon fender by hand before installing any bolts. Verify alignment with the door edge, hood edge, and bumper.\u003c\/li\u003e\n\u003cli\u003eThread all mounting bolts by hand before torquing. Start from the top center bolt and work outward.\u003c\/li\u003e\n\u003cli\u003eTorque all bolts to 8-12 Nm. Do not exceed 20 Nm on carbon fiber panel bolt holes.\u003c\/li\u003e\n\u003cli\u003eReinstall fender liner and splash shield.\u003c\/li\u003e\n\u003cli\u003eCheck gap alignment with the door and hood. Minor adjustment within the bolt slot tolerance is normal.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch4\u003eFrequently Asked Questions\u003c\/h4\u003e\n\u003cstrong\u003eAre both fenders included?\u003c\/strong\u003e\n\u003cp\u003eProducts listed as a pair include both driver and passenger side fenders. Individual side products are also available ,  check the product title to confirm.\u003c\/p\u003e\n\u003cstrong\u003eDo I need to repaint the fenders to match my car?\u003c\/strong\u003e\n\u003cp\u003eNo painting is needed for a carbon fiber look. The UV-resistant clear coat is factory-applied and show-ready. For a color-matched finish, a body shop can paint over the existing clear coat after light sanding and primer prep.\u003c\/p\u003e\n\u003cstrong\u003eWill my OEM turn signals and marker lights fit in the carbon fenders?\u003c\/strong\u003e\n\u003cp\u003eYes. Seibon fenders are pre-drilled to accept the OEM lighting assemblies. Transfer your existing lights and wiring harnesses directly.\u003c\/p\u003e\n\u003cstrong\u003eWhat is the warranty?\u003c\/strong\u003e\n\u003cp\u003eSeibon provides a fitment guarantee and a 6-month limited clear coat warranty. Under the Magnuson-Moss Warranty Act, installing aftermarket fenders does not void your vehicle's factory warranty on unrelated systems.\u003c\/p\u003e\n\u003cstrong\u003eHow do I care for the carbon surface?\u003c\/strong\u003e\n\u003cp\u003eWash with mild soap and a microfiber cloth. Apply UV-protectant wax after every wash. Avoid abrasive polishing compounds, which can scratch or cloud the clear coat.\u003c\/p\u003e\n\u003cstrong\u003eCan I install these myself?\u003c\/strong\u003e\n\u003cp\u003eYes, with basic hand tools and a helper to support the panel during installation. Seibon recommends professional installation by someone experienced with carbon fiber body components for best fitment results.\u003c\/p\u003e\n\u003cstrong\u003eWill these fit a vehicle with widebody or flared fender modifications?\u003c\/strong\u003e\n\u003cp\u003eThese fenders are designed for unmodified, factory-spec vehicles. Fitment on widebody-converted or previously repaired vehicles is not guaranteed by Seibon.\u003c\/p\u003e\n\u003cstrong\u003eHow much lighter are these than the OEM steel fenders?\u003c\/strong\u003e\n\u003cp\u003eSeibon carbon fiber fenders are up to 50% lighter than comparable OEM steel fenders. Exact weight savings vary by vehicle platform.\u003c\/p\u003e","brand":"Seibon","offers":[{"title":"Default Title","offer_id":43024931192911,"sku":"SEIFF22TY86","price":1440.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1062\/7920\/files\/seibon-2022-toyota-gr86-subaru-brz-carbon-fiber-fenders-gloss-finish-seibon.jpg?v=1771969122","url":"https:\/\/www.blackopsautoworks.com\/products\/seibon-2022-toyota-gr86-subaru-brz-carbon-fiber-fenders-gloss-finish","provider":"Black Ops Auto Works","version":"1.0","type":"link"}