{"product_id":"seibon-2024-acura-integra-type-s-mb-style-carbon-fiber-front-lip","title":"Seibon 2024 Acura Integra Type-S MB-Style Carbon Fiber Front Lip","description":"\u003ch4\u003eLightweight carbon fiber front lip for the compatible vehicles\u003c\/h4\u003e\n\u003cp\u003eThe Seibon FL24ACINS-MB is a hand-laid 3K 2x2 twill weave carbon fiber over a fiberglass skeleton front lip built specifically for the compatible vehicles. The UV-resistant gloss clear coat is factory-applied and ready to install. At up to 50% lighter than the OEM steel equivalent, it reduces unsprung weight for measurable gains in acceleration, braking balance, and cornering response.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFront-End Aerodynamics:\u003c\/strong\u003e Redirects airflow under the front bumper to reduce front-end lift, improve stability, and sharpen high-speed response.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e3K 2x2 Twill Weave Construction:\u003c\/strong\u003e Hand-laid carbon fiber over a fiberglass backbone provides the right balance of rigidity and flex for road use.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGloss Clear Coat:\u003c\/strong\u003e Factory-applied UV-resistant finish shows clean carbon weave without any painting required.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOEM Bumper Compatibility:\u003c\/strong\u003e Designed to mount beneath the stock front bumper using OEM clips or included hardware with no cutting required.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSeibon Fitment Guarantee:\u003c\/strong\u003e Verified against the target vehicle; length tolerance within 3\/8 inch of stock bumper edge for seamless integration.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMotorsport Proven:\u003c\/strong\u003e Same construction trusted by Seibon's racing customers since 2003.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eSpecifications\u003c\/h4\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eDetail\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003ePart Number\u003c\/td\u003e\n\u003ctd\u003eFL24ACINS-MB\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eUPC\u003c\/td\u003e\n\u003ctd\u003e887753494320\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaterial\u003c\/td\u003e\n\u003ctd\u003e3K 2x2 twill weave carbon fiber\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFinish\u003c\/td\u003e\n\u003ctd\u003eGloss UV-resistant clear coat\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConstruction\u003c\/td\u003e\n\u003ctd\u003eHand-laid with fiberglass skeleton\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight Savings\u003c\/td\u003e\n\u003ctd\u003eUp to 50% lighter than OEM equivalent\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHardware\u003c\/td\u003e\n\u003ctd\u003eUses OEM mounting hardware; not included\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWarranty\u003c\/td\u003e\n\u003ctd\u003eSeibon 6-month limited clear coat warranty; fitment guarantee\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch4\u003eWhat's Included\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e1x Seibon carbon fiber front lip\u003c\/li\u003e\n\u003cli\u003eMounting hardware (where applicable)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eInstallation\u003c\/h4\u003e\n\u003col\u003e\n\u003cli\u003eGather tools: panel pop tool, Phillips screwdriver, 10mm socket, and body panel clips.\u003c\/li\u003e\n\u003cli\u003eJack up the front of the vehicle safely and remove undertray panels if needed to access the bumper lower mounting points.\u003c\/li\u003e\n\u003cli\u003eIdentify the OEM lower bumper mounting clips or screws along the bottom edge of the front bumper.\u003c\/li\u003e\n\u003cli\u003ePre-fit the lip against the bumper edge without fastening to confirm alignment. Seibon recommends pre-fitting before any modification.\u003c\/li\u003e\n\u003cli\u003eStarting from the center, attach the lip using OEM-style push clips or the supplied hardware. Work outward toward each corner.\u003c\/li\u003e\n\u003cli\u003eDo not overtighten. Carbon fiber mounting flanges can crack under excessive torque.\u003c\/li\u003e\n\u003cli\u003eVerify the lip sits flush and level across the full bumper width before final tightening.\u003c\/li\u003e\n\u003cli\u003eLower the vehicle and inspect the ground clearance. Minimum 4 inches of clearance is recommended to avoid curb strikes.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch4\u003eFrequently Asked Questions\u003c\/h4\u003e\n\u003cstrong\u003eWill this lip clear speed bumps and parking curbs?\u003c\/strong\u003e\n\u003cp\u003eGround clearance depends on your vehicle's ride height. On a stock-height vehicle, most Seibon lips provide adequate clearance for normal driving. Lowered vehicles may experience scraping. Measure your current bumper-to-ground clearance before purchasing.\u003c\/p\u003e\n\u003cstrong\u003eDoes this require any cutting to the OEM bumper?\u003c\/strong\u003e\n\u003cp\u003eNo cutting is required on properly fitting Seibon lips. The lip mounts beneath the factory bumper edge using existing clip locations or supplied hardware. Always pre-fit before making any modifications.\u003c\/p\u003e\n\u003cstrong\u003eDoes it come with mounting hardware?\u003c\/strong\u003e\n\u003cp\u003eSome Seibon lips include mounting hardware; others use the OEM clip locations. Check the product-specific fitment notes. Aftermarket push clips in the 6-8mm range are widely available and work well.\u003c\/p\u003e\n\u003cstrong\u003eCan I paint this to match my car?\u003c\/strong\u003e\n\u003cp\u003eYes. The clear-coated carbon surface accepts paint after light sanding and primer application. For a carbon show look, no paint is needed.\u003c\/p\u003e\n\u003cstrong\u003eWhat is the warranty?\u003c\/strong\u003e\n\u003cp\u003eSeibon provides a fitment guarantee covering lips that fall more than 3\/8 inch shorter or longer than the factory bumper edge, and a 6-month clear coat warranty. Under the Magnuson-Moss Warranty Act, this product does not void your vehicle's factory warranty on unrelated components.\u003c\/p\u003e\n\u003cstrong\u003eHow do I clean and protect the carbon finish?\u003c\/strong\u003e\n\u003cp\u003eWash with mild soap and a microfiber cloth. Apply UV-protectant wax regularly. The underside of the lip is exposed to road debris, so inspect periodically for chips or cracks and address any damage promptly to prevent moisture intrusion.\u003c\/p\u003e\n\u003cstrong\u003eWill this fit if my bumper has been repainted or repaired?\u003c\/strong\u003e\n\u003cp\u003eSeibon fitment is guaranteed for unmodified, accident-free US-spec vehicles. Vehicles with body damage history or non-factory bumper repairs may require adjustment for proper fitment.\u003c\/p\u003e\n\u003cstrong\u003eIs professional installation recommended?\u003c\/strong\u003e\n\u003cp\u003eAn experienced DIY enthusiast can install a front lip with basic hand tools. For best results, Seibon recommends someone familiar with carbon fiber component handling.\u003c\/p\u003e","brand":"Seibon","offers":[{"title":"Default Title","offer_id":44784995303503,"sku":"SEIFL24ACINS-MB","price":945.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1062\/7920\/files\/seibon-2024-acura-integra-type-s-mb-style-carbon-fiber-front-lip-seibon-4.jpg?v=1773754598","url":"https:\/\/www.blackopsautoworks.com\/products\/seibon-2024-acura-integra-type-s-mb-style-carbon-fiber-front-lip","provider":"Black Ops Auto Works","version":"1.0","type":"link"}