{"product_id":"spc-performance-09-10-nissan-370z-06-08-infiniti-g35-08-10-g37-ballpoint-for-front-adj-control-arms","title":"SPC Replacement Adjustable Ball Joint for 72130 Upper Arms","description":"\u003ch4\u003eReplacement Adjustable Ball Joint for SPC Upper Arms\u003c\/h4\u003e\n\u003cp\u003eThis SPC Performance replacement ball joint assembly services the 72130 front upper control arms. The joint is part of the arm's patented sliding and rotating adjustment design, helping set front camber and caster after installation. It is a service part for the aftermarket SPC arm, not a factory ball joint replacement for a stock control arm.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eDirect replacement adjustable ball joint assembly for the matching SPC front upper control arm.\u003c\/li\u003e\n\u003cli\u003eSliding and rotating design used to set camber and caster on the arm.\u003c\/li\u003e\n\u003cli\u003eSupports up to plus or minus 2.5 degrees of camber adjustment and plus or minus 1.0 degree of caster adjustment when used with the correct arm.\u003c\/li\u003e\n\u003cli\u003eIncludes the lock plate used with the engagement hex for caster positioning.\u003c\/li\u003e\n\u003cli\u003eUseful service replacement for worn or damaged joints in an existing SPC arm setup.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eFitment\u003c\/h4\u003e\n\u003ctable style=\"width: 100%;\"\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003eApplication\u003c\/th\u003e\n\u003cth\u003eFitment note\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eSPC 72130 front upper control arm\u003c\/td\u003e\n\u003ctd\u003eDirect replacement ball joint assembly.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eNissan 370Z, 2009-2020\u003c\/td\u003e\n\u003ctd\u003eFits only when SPC 72130 front upper control arms are installed.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInfiniti G35 Sedan, 2007-2008\u003c\/td\u003e\n\u003ctd\u003eFits only when SPC 72130 front upper control arms are installed.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInfiniti G37, 2008-2013\u003c\/td\u003e\n\u003ctd\u003eFits only when SPC 72130 front upper control arms are installed.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOther supported vehicles using the same SPC arms\u003c\/td\u003e\n\u003ctd\u003eVerify the arm part number before ordering.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch4\u003eSpecifications\u003c\/h4\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003eDetail\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eSPC Performance\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eManufacturer part number\u003c\/td\u003e\n\u003ctd\u003e72130.25\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePart role\u003c\/td\u003e\n\u003ctd\u003eReplacement adjustable ball joint assembly\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAdjustment design\u003c\/td\u003e\n\u003ctd\u003eSliding and rotating ball joint with caster lock plate\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCamber range with matching arms\u003c\/td\u003e\n\u003ctd\u003ePlus or minus 2.5 degrees\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCaster range with matching arms\u003c\/td\u003e\n\u003ctd\u003ePlus or minus 1.0 degree\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCamber adjusting nut torque\u003c\/td\u003e\n\u003ctd\u003e120 lb-ft (162 Nm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBall joint to spindle fastener torque\u003c\/td\u003e\n\u003ctd\u003eUse the vehicle manufacturer's specification\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRelated clearance spacer\u003c\/td\u003e\n\u003ctd\u003eSPC 67300 jounce spacer, where needed\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch4\u003eWhat's Included\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eOne replacement adjustable ball joint assembly with lock plate\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eImportant Notes\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eThis part services SPC 72130 front upper control arms only.\u003c\/li\u003e\n\u003cli\u003eIt is not a replacement for the original factory ball joint on an OE control arm.\u003c\/li\u003e\n\u003cli\u003eAfter installation, the vehicle should be aligned and road tested.\u003c\/li\u003e\n\u003cli\u003eOn lowered vehicles, check upper arm to inner fender clearance through full suspension travel.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eAbout SPC Performance\u003c\/h4\u003e\n\u003cp\u003eSPC Performance builds alignment correction components for street and performance vehicles. Its front upper control arm design for Nissan 370Z and Infiniti platform applications uses an adjustable ball joint and caster plate to correct front camber and caster. This assembly is the service replacement for that adjustable joint.\u003c\/p\u003e\n\u003ch4\u003eRelated Parts\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/products\/spc-performance-09-10-nissan-370z-06-08-infiniti-g35-08-10-g37-front-adjustable-control-arms\"\u003eSPC Performance front adjustable control arms for Nissan 370Z and Infiniti G35\/G37\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/spc-performance-03-08-nissan-350z-03-07-infiniti-g35-balljoint-assemby-for-72125\"\u003eSPC Performance ball joint assembly for SPC 72125 arms\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eFAQ\u003c\/h4\u003e\n\u003cp\u003e\u003cstrong\u003eWhich control arm does this ball joint fit?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eIt fits SPC Performance 72130 adjustable front upper control arms.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWill this replace my factory ball joint?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eNo. This is a service replacement for the aftermarket SPC arm. It is not intended for a stock\/OE upper control arm.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDoes it fit my Nissan 370Z or Infiniti G35\/G37?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eIt fits those vehicles only when the correct SPC front upper control arms are already installed.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow much adjustment does the arm provide with this joint?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe matching SPC arm provides up to plus or minus 2.5 degrees of camber and plus or minus 1.0 degree of caster adjustment.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDoes the car need an alignment after installation?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes. Recheck alignment, adjust toe as needed, and road test the vehicle after installation.\u003c\/p\u003e\n\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\n\u003col\u003e\n\u003cli\u003eConfirm the vehicle has the correct SPC front upper control arms installed before ordering.\u003c\/li\u003e\n\u003cli\u003eRaise and support the vehicle safely, remove the wheel, and support the lower control arm.\u003c\/li\u003e\n\u003cli\u003eDisconnect the existing ball joint from the spindle following the vehicle service procedure.\u003c\/li\u003e\n\u003cli\u003eRemove the ball joint nut and washer from the control arm slot and remove the old joint.\u003c\/li\u003e\n\u003cli\u003ePosition the replacement joint and lock plate for the caster setting required.\u003c\/li\u003e\n\u003cli\u003eSlide the joint in the arm slot for the desired camber setting and torque the camber adjusting nut to 120 lb-ft (162 Nm).\u003c\/li\u003e\n\u003cli\u003eReconnect the ball joint to the spindle and torque the vehicle fastener to the manufacturer's specification.\u003c\/li\u003e\n\u003cli\u003eLoad the suspension to ride height, check clearance through suspension travel, align the vehicle, and road test.\u003c\/li\u003e\n\u003c\/ol\u003e","brand":"SPC Performance","offers":[{"title":"Default Title","offer_id":46371336290383,"sku":"SPC7213025","price":91.75,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1062\/7920\/files\/spc-performance-72130-25-replacement-ball-joint-for-72130-upper-arm-01.jpg?v=1786319795","url":"https:\/\/www.blackopsautoworks.com\/products\/spc-performance-09-10-nissan-370z-06-08-infiniti-g35-08-10-g37-ballpoint-for-front-adj-control-arms","provider":"Black Ops Auto Works","version":"1.0","type":"link"}