{"product_id":"spl-parts-06-15-mazda-miata-nc-rear-traction-links","title":"SPL RTR NC","description":"\u003ch4\u003eSPL Parts Rear Traction Links for 2006-2015 Mazda MX-5 Miata and 2003-2012 RX-8\u003c\/h4\u003e\n\u003cp\u003eSPL RTR NC rear traction links replace the soft factory rubber bushings on the NC Miata and RX-8 rear traction links with a length adjustable, rod end equipped design. The links reduce rear toe changes under hard acceleration, braking, and bumps for tighter and more predictable rear suspension response.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eLength adjustable to correct rear bumpsteer characteristics on lowered cars\u003c\/li\u003e\n\u003cli\u003e1.25 inch 4130 chromoly tubing TIG welded to a CNC machined threaded sleeve\u003c\/li\u003e\n\u003cli\u003e4130 chromoly double adjuster that is CNC gun drilled to reduce weight\u003c\/li\u003e\n\u003cli\u003eBlue anodized titanium hardware to reduce unsprung weight\u003c\/li\u003e\n\u003cli\u003eFK Bearings Teflon lined rod ends for low friction, deflection free articulation\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eFitment\u003c\/h4\u003e\n\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eYear\u003c\/th\u003e\n\u003cth\u003eMake\u003c\/th\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003cth\u003eTrim\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2006-2015\u003c\/td\u003e\n\u003ctd\u003eMazda\u003c\/td\u003e\n\u003ctd\u003eMX-5 Miata\u003c\/td\u003e\n\u003ctd\u003eAll\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2003-2012\u003c\/td\u003e\n\u003ctd\u003eMazda\u003c\/td\u003e\n\u003ctd\u003eRX-8\u003c\/td\u003e\n\u003ctd\u003eAll\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch4\u003eSpecifications\u003c\/h4\u003e\n\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eDetail\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eManufacturer part number\u003c\/td\u003e\n\u003ctd\u003eSPL RTR NC\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTubing material\u003c\/td\u003e\n\u003ctd\u003e1.25 inch 4130 chromoly, TIG welded\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAdjuster material\u003c\/td\u003e\n\u003ctd\u003e4130 chromoly, CNC gun drilled\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHardware finish\u003c\/td\u003e\n\u003ctd\u003eBlue anodized titanium\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRod end lining\u003c\/td\u003e\n\u003ctd\u003eFK Bearings PTFE lined, Teflon liner chemically bonded to the race\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOperating temperature range\u003c\/td\u003e\n\u003ctd\u003eNegative 65 to positive 250 degrees Fahrenheit\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch4\u003eWhat's Included\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e1 pair of adjustable rear traction links\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eAbout SPL Parts\u003c\/h4\u003e\n\u003cp\u003eSPL Parts engineers CNC machined suspension hardware for BMW and Mazda MX-5 platforms, focused on eliminating factory bushing deflection and slip points to keep alignment settings stable under sustained track and autocross loads.\u003c\/p\u003e\n\u003ch4\u003eFAQ\u003c\/h4\u003e\n\u003cstrong\u003eDo these links fit the RX-8 as well as the Miata?\u003c\/strong\u003e\n\u003cp\u003eYes. This part fits the 2006-2015 MX-5 Miata and the 2003-2012 RX-8, which share the same NC generation rear suspension mounting points.\u003c\/p\u003e\n\u003cstrong\u003eWhy replace the factory rubber bushings with these links?\u003c\/strong\u003e\n\u003cp\u003eThe factory rubber bushings are soft and wear out over time, allowing toe changes in the rear suspension under acceleration, braking, and bumps. These links use rod ends instead to eliminate that deflection.\u003c\/p\u003e\n\u003cstrong\u003eCan these links be adjusted for a lowered car?\u003c\/strong\u003e\n\u003cp\u003eYes. The links are length adjustable, which allows the rear bumpsteer characteristics to be corrected after lowering the car.\u003c\/p\u003e\n\u003cstrong\u003eWhat material is the main link tubing made from?\u003c\/strong\u003e\n\u003cp\u003eThe links use 1.25 inch 4130 chromoly tubing that is TIG welded to a CNC machined threaded sleeve.\u003c\/p\u003e\n\u003cstrong\u003eWhat type of rod ends are used?\u003c\/strong\u003e\n\u003cp\u003eThe links use FK Bearings rod ends manufactured in Connecticut with a Teflon liner chemically bonded to the race for low friction articulation.\u003c\/p\u003e\n\u003cstrong\u003eDo these links reduce weight compared to the stock parts?\u003c\/strong\u003e\n\u003cp\u003eYes. The chromoly double adjuster is CNC gun drilled and the hardware is blue anodized titanium to reduce unsprung weight.\u003c\/p\u003e\n\u003cstrong\u003eHow many links come in this listing?\u003c\/strong\u003e\n\u003cp\u003eThe listing includes one pair of rear traction links.\u003c\/p\u003e\n\u003cstrong\u003eIs professional installation recommended?\u003c\/strong\u003e\n\u003cp\u003eProfessional installation and a post install alignment are recommended given the suspension component work involved.\u003c\/p\u003e\n\u003ch4\u003eInstallation Instructions\u003c\/h4\u003e\n\u003col\u003e\n\u003cli\u003eRaise and safely support the vehicle, then remove the rear wheels for access.\u003c\/li\u003e\n\u003cli\u003eRemove the factory rear traction links at the subframe and knuckle mounting points.\u003c\/li\u003e\n\u003cli\u003eInstall the SPL rear traction links at the same factory mounting points using the included rod end hardware.\u003c\/li\u003e\n\u003cli\u003eAdjust the link length as needed to correct rear bumpsteer geometry for the vehicle ride height.\u003c\/li\u003e\n\u003cli\u003eTorque all hardware to specification, reinstall the wheels, and have the vehicle professionally aligned.\u003c\/li\u003e\n\u003c\/ol\u003e\n","brand":"SPL Parts","offers":[{"title":"Default Title","offer_id":46447906455631,"sku":"SPPSPL RTR NC","price":358.1,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1062\/7920\/files\/6c2d69b73bdc4bc57d9325ad55f7804c.jpg?v=1787167929","url":"https:\/\/www.blackopsautoworks.com\/products\/spl-parts-06-15-mazda-miata-nc-rear-traction-links","provider":"Black Ops Auto Works","version":"1.0","type":"link"}