{"product_id":"spl-parts-re-jsn-rear-swaybar-endlinks-2019-hyundai-veloster-n","title":"SPL Parts 2019+ Hyundai Veloster N Rear Swaybar Endlinks","description":"\u003ch4\u003ePrecision-Adjustable Rear Endlinks Built for the Veloster N Platform\u003c\/h4\u003e\n\u003cp\u003eThe SPL RE JSN rear swaybar endlinks replace the rigid OEM units with a fully adjustable, bearing-based design engineered for the 2019+ Hyundai Veloster N. Whether you are running a stock suspension or stacked with coilovers and an aftermarket sway bar, these endlinks allow you to dial out preload, set the ideal bar angle, and eliminate the bind that holds back your sway bar tuning. Tested and proven on the GenRacer Hyundai TC America championship race team's winning Veloster N, the SPL RE JSN delivers race-level engineering for both the track and the daily commute.\u003c\/p\u003e\n\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eMassive PTFE-lined FK 1\/2 in. rod end bearings for maximum load capacity under aggressive cornering\u003c\/li\u003e\n\u003cli\u003eCustom heat-treated chromoly high-misalignment studs allow up to 65 degrees of articulation, eliminating endlink bind with aftermarket sway bars\u003c\/li\u003e\n\u003cli\u003eLength-adjustable design lets you eliminate sway bar preload caused by corner weighting, coilover height differences, or spring settling\u003c\/li\u003e\n\u003cli\u003eBlack anodized 6061-T6 aluminum turnbuckles with left and right hand threading for quick, precise length adjustment\u003c\/li\u003e\n\u003cli\u003eGrade 10.9 fasteners and machined 6061-T6 aluminum spacers for factory-quality fitment at the lower control arm\u003c\/li\u003e\n\u003cli\u003eSold as a pair, suitable for street, autocross, and full race builds\u003c\/li\u003e\n\u003cli\u003eMade in the USA\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch4\u003eFitment\u003c\/h4\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eYear Range\u003c\/th\u003e\n\u003cth\u003eMake\u003c\/th\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e2019-2024\u003c\/td\u003e\n\u003ctd\u003eHyundai\u003c\/td\u003e\n\u003ctd\u003eVeloster N\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch4\u003eSpecifications\u003c\/h4\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eDetail\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003ePart Number (MPN)\u003c\/td\u003e\n\u003ctd\u003eSPL RE JSN\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eSPL Parts\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eApplication\u003c\/td\u003e\n\u003ctd\u003e2019+ Hyundai Veloster N\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBearing Type\u003c\/td\u003e\n\u003ctd\u003ePTFE-lined FK 1\/2 in. rod end bearings\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eStud Material\u003c\/td\u003e\n\u003ctd\u003eHeat-treated chromoly steel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBody Material\u003c\/td\u003e\n\u003ctd\u003e6061-T6 aluminum (black anodized)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMax Articulation Angle\u003c\/td\u003e\n\u003ctd\u003e65 degrees\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHardware Grade\u003c\/td\u003e\n\u003ctd\u003eGrade 10.9\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eQuantity\u003c\/td\u003e\n\u003ctd\u003ePair (2 endlinks)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCountry of Origin\u003c\/td\u003e\n\u003ctd\u003eUSA\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eUPC\u003c\/td\u003e\n\u003ctd\u003eContact vendor for UPC\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch4\u003eWhat's Included\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e2x SPL RE JSN adjustable rear swaybar endlinks (left and right)\u003c\/li\u003e\n\u003cli\u003ePTFE-lined FK rod end bearings (installed)\u003c\/li\u003e\n\u003cli\u003eChromoly high-misalignment studs (installed)\u003c\/li\u003e\n\u003cli\u003e6061-T6 aluminum spacers\u003c\/li\u003e\n\u003cli\u003eGrade 10.9 mounting hardware\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch4\u003eAbout SPL Parts\u003c\/h4\u003e\n\u003cp\u003eSPL Parts is a US-based manufacturer specializing in high-performance suspension components for enthusiast and motorsport applications. Every SPL Parts product is designed, machined, and assembled in the United States using aerospace-grade materials and race-proven engineering. The brand supplies teams competing in Hyundai TC America, Global Time Attack, and numerous club racing series, and each component is validated through real-world competition before it ever reaches the aftermarket.\u003c\/p\u003e\n\n\u003ch4\u003eFrequently Asked Questions\u003c\/h4\u003e\n\u003cstrong\u003eWill the SPL RE JSN endlinks fit the Hyundai Kona N?\u003c\/strong\u003e\n\u003cp\u003eYes. The Veloster N and Kona N share the JSN chassis designation, and the SPL RE JSN is confirmed to fit both the 2019+ Hyundai Veloster N and the Kona N platform at the rear swaybar mounting points.\u003c\/p\u003e\n\n\u003cstrong\u003eDo I need an aftermarket sway bar to benefit from the SPL RE JSN?\u003c\/strong\u003e\n\u003cp\u003eNo. Even on a completely stock Veloster N, switching to the SPL RE JSN allows you to remove the preload that builds up on the OEM sway bar when the car settles unevenly under driver weight or after coilover adjustment. Less preload means more consistent handling and less variation between left and right corners.\u003c\/p\u003e\n\n\u003cstrong\u003eWhat is the OEM part number the SPL RE JSN replaces?\u003c\/strong\u003e\n\u003cp\u003eThe SPL RE JSN replaces OEM reference part number 55530-G2000. It is a direct-fit replacement at the rear suspension swaybar drop link location on the 2019+ Veloster N.\u003c\/p\u003e\n\n\u003cstrong\u003eHow adjustable is the length of the SPL RE JSN?\u003c\/strong\u003e\n\u003cp\u003eThe black anodized 6061-T6 aluminum turnbuckle body uses left and right hand threaded rod ends, allowing precise length changes by simply rotating the center body. This lets you set the ideal sway bar lever arm angle without tools beyond a wrench to lock the jam nuts.\u003c\/p\u003e\n\n\u003cstrong\u003eWill the SPL RE JSN bind with an aftermarket sway bar?\u003c\/strong\u003e\n\u003cp\u003eNo. The custom chromoly high-misalignment studs and PTFE-lined bearings allow up to 65 degrees of articulation at each end, which is significantly more than OEM ball-stud endlinks. This prevents the bind that causes premature wear and unpredictable handling when running aggressive drop links with a stiff aftermarket bar.\u003c\/p\u003e\n\n\u003cstrong\u003eAre the SPL RE JSN endlinks legal for use in Hyundai One Make race series?\u003c\/strong\u003e\n\u003cp\u003eSPL Parts components have been used in Hyundai TC America competition. However, rules vary by series and season. Always verify with your series technical committee before installing any aftermarket suspension component in a sanctioned race vehicle.\u003c\/p\u003e\n\n\u003cstrong\u003eWhat hardware grade is included with the SPL RE JSN?\u003c\/strong\u003e\n\u003cp\u003eThe kit ships with Grade 10.9 metric fasteners and machined 6061-T6 aluminum spacers for the lower control arm attachment points. These exceed OEM hardware specifications and are rated for sustained high-load motorsport use.\u003c\/p\u003e\n\n\u003cstrong\u003eDo the SPL RE JSN endlinks require any maintenance?\u003c\/strong\u003e\n\u003cp\u003ePTFE-lined rod end bearings are self-lubricating under normal use. In track or autocross environments with heavy lateral loads, periodic inspection of the bearing surfaces and jam nut torque is recommended to ensure the endlinks remain in optimal condition. SPL Parts provides detailed installation and maintenance instructions with each kit.\u003c\/p\u003e\n\n\u003ch4\u003eInstallation Instructions\u003c\/h4\u003e\n\u003col\u003e\n\u003cli\u003eSafely lift and support the rear of the vehicle on jack stands with the suspension at ride height (do not let the suspension hang free).\u003c\/li\u003e\n\u003cli\u003eRemove the OEM rear swaybar endlink upper and lower bolts using the appropriate metric socket.\u003c\/li\u003e\n\u003cli\u003eNote the OEM endlink length for reference during initial SPL RE JSN length setup.\u003c\/li\u003e\n\u003cli\u003eThread the SPL RE JSN endlink to approximately OEM length using the turnbuckle body, ensuring equal thread engagement on both rod ends.\u003c\/li\u003e\n\u003cli\u003eInstall the upper stud into the sway bar mounting hole and hand-thread the factory nut or supplied hardware.\u003c\/li\u003e\n\u003cli\u003eInstall the lower stud into the lower control arm mounting point using the supplied aluminum spacers and Grade 10.9 bolts.\u003c\/li\u003e\n\u003cli\u003eWith the suspension loaded at ride height, adjust the turnbuckle length until the sway bar lever arm is level (parallel to ground) and there is no preload on the bar.\u003c\/li\u003e\n\u003cli\u003eTorque all hardware to factory specification for the lower control arm bolt, and tighten the jam nuts securely against the turnbuckle body.\u003c\/li\u003e\n\u003cli\u003eRepeat for the opposite side, then lower the vehicle and verify the sway bar is sitting level side to side before driving.\u003c\/li\u003e\n\u003c\/ol\u003e\n\n\u003cp\u003e\u003cstrong\u003eWARNING:\u003c\/strong\u003e This product can expose you to chemicals including lead and phthalates, which are known to the State of California to cause cancer and reproductive harm. For more information go to www.P65Warnings.ca.gov.\u003c\/p\u003e","brand":"SPL Parts","offers":[{"title":"Default Title","offer_id":46028730007631,"sku":"SPPSPL RE JSN","price":223.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1062\/7920\/files\/spl-re-jsn-rear-swaybar-endlinks-hyundai-veloster-n.png?v=1783536897","url":"https:\/\/www.blackopsautoworks.com\/products\/spl-parts-re-jsn-rear-swaybar-endlinks-2019-hyundai-veloster-n","provider":"Black Ops Auto Works","version":"1.0","type":"link"}