{"product_id":"superpro-11-20-mazda-bt-50-up-ur-front-fixed-offset-upper-control-arm-kit","title":"SuperPro Fixed Offset Front Upper Control Arm Kit - Ranger, BT-50, Everest","description":"\u003ch4\u003eRestore Alignment on Your Lifted Ranger, Everest, or BT-50\u003c\/h4\u003e\u003cp\u003eSuperPro TRC6560 is a complete pair of fixed-offset front upper control arms designed to restore suspension geometry on compatible lifted Ford Ranger, Ford Everest, and Mazda BT-50 vehicles. The reshaped arms add coil-over clearance while heavy-duty ball joints and polyurethane bushings support controlled articulation.\u003c\/p\u003e\u003ch4\u003eKey Features\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eTRC6560 uses fixed-offset geometry to add caster and negative camber correction.\u003c\/li\u003e\n\u003cli\u003eDesigned for lifted vehicles, with SuperPro guidance covering approximately 30-70 mm of lift.\u003c\/li\u003e\n\u003cli\u003eProvides approximately 2.5-3.5 degrees of additional caster and up to 1.5 degrees of additional negative camber at a 50 mm lift.\u003c\/li\u003e\n\u003cli\u003eIncludes heavy-duty ball joints and SuperPro polyurethane bushings.\u003c\/li\u003e\n\u003cli\u003eIncreases clearance between the control arm and coil-over at full articulation.\u003c\/li\u003e\n\u003cli\u003eComplete two-arm kit for the front axle.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eFitment\u003c\/h4\u003e\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eVehicle\u003c\/th\u003e\n\u003cth\u003eYears\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eFord Ranger\u003c\/td\u003e\n\u003ctd\u003e2012-2022\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFord Everest\u003c\/td\u003e\n\u003ctd\u003e2015-2022\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMazda BT-50\u003c\/td\u003e\n\u003ctd\u003e2011-2020\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003cp\u003eFitment applies to the compatible Ranger PX, Everest UA, and second-generation BT-50 platforms. Confirm vehicle application and lift height before installation.\u003c\/p\u003e\u003ch4\u003eSpecifications\u003c\/h4\u003e\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eDetail\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eSuperPro\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMPN\u003c\/td\u003e\n\u003ctd\u003eTRC6560\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePart type\u003c\/td\u003e\n\u003ctd\u003eFront upper control arm kit\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePosition\u003c\/td\u003e\n\u003ctd\u003eFront upper\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eStyle\u003c\/td\u003e\n\u003ctd\u003eFixed offset\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eArms included\u003c\/td\u003e\n\u003ctd\u003e2\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBall joints included\u003c\/td\u003e\n\u003ctd\u003eYes, pre-installed\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBushing material\u003c\/td\u003e\n\u003ctd\u003ePolyurethane\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eUPC\u003c\/td\u003e\n\u003ctd\u003e9317745788324\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInstallation time\u003c\/td\u003e\n\u003ctd\u003eApproximately 2 hours\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003ch4\u003eWhat's Included\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eTwo TRC6560 fixed-offset front upper control arms\u003c\/li\u003e\n\u003cli\u003eTwo pre-installed heavy-duty ball joints\u003c\/li\u003e\n\u003cli\u003eSuperPro polyurethane bushings and sleeves\u003c\/li\u003e\n\u003cli\u003eCastle nuts, split pins, bushing grease, and ABS-wire retaining hardware\u003c\/li\u003e\n\u003cli\u003eInstallation instructions\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eAbout SuperPro\u003c\/h4\u003e\u003cp\u003eSuperPro designs polyurethane suspension components and complete alignment-correction assemblies for street, performance, and off-road vehicles. The TRC6560 kit combines corrected geometry with serviceable suspension hardware for lifted truck applications.\u003c\/p\u003e\u003ch4\u003eRelated Parts\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eTRC6560 replacement ball-joint service kit: KIT6560RK\u003c\/li\u003e\n\u003cli\u003eVehicle-specific front suspension and alignment components should be verified before ordering.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eFAQ\u003c\/h4\u003e\u003cp\u003e\u003cstrong\u003eWhat is the TRC6560?\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eIt is a pair of fixed-offset front upper control arms for compatible lifted Ford Ranger, Ford Everest, and Mazda BT-50 vehicles.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eAre these control arms adjustable?\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eNo. Alignment correction is built into the fixed-offset arm geometry.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat lift heights are supported?\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eSuperPro documentation describes applications with approximately 30-70 mm of lift, with published correction figures based on a 50 mm lift.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eAre ball joints included?\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eYes. Two heavy-duty ball joints are pre-installed in the arms.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eAre control-arm bushings included?\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eYes. SuperPro polyurethane bushings and sleeves are included.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs a wheel alignment required?\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eYes. A professional wheel alignment is required after installation.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan these arms be installed at factory ride height?\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThey are designed as an alignment-correction solution for lifted vehicles and should be selected according to the verified lift height.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDo the fasteners require a follow-up inspection?\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eYes. SuperPro instructs installers to re-torque the fasteners after 100 km of driving.\u003c\/p\u003e\u003ch4\u003eInstall Instructions\u003c\/h4\u003e\u003col\u003e\n\u003cli\u003eSupport the vehicle safely and remove the front wheels.\u003c\/li\u003e\n\u003cli\u003eRelease the ABS wiring brackets without stretching the cables.\u003c\/li\u003e\n\u003cli\u003eSeparate each upper ball joint from the steering knuckle and remove the factory upper arms.\u003c\/li\u003e\n\u003cli\u003eLightly grease the supplied bushing ends and position the new arms in the chassis mounts.\u003c\/li\u003e\n\u003cli\u003eTorque the control-arm mounting hardware to 115 Nm.\u003c\/li\u003e\n\u003cli\u003eInstall the supplied castle nuts on the ball-joint studs and torque to 110 Nm, then align and install the split pins.\u003c\/li\u003e\n\u003cli\u003eSecure the ABS wiring and verify adequate slack through steering and suspension travel.\u003c\/li\u003e\n\u003cli\u003eRefit the wheels, lower the vehicle, and complete a professional wheel alignment.\u003c\/li\u003e\n\u003cli\u003eRe-torque all fasteners after 100 km.\u003c\/li\u003e\n\u003c\/ol\u003e\u003ch4\u003eProp 65 Warning\u003c\/h4\u003e\u003cp\u003eWARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.\u003c\/p\u003e","brand":"Superpro","offers":[{"title":"Default Title","offer_id":46373786976335,"sku":"SPRTRC6560","price":572.21,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1062\/7920\/files\/superpro-trc6560-fixed-offset-upper-control-arm-kit-01.jpg?v=1786379712","url":"https:\/\/www.blackopsautoworks.com\/products\/superpro-11-20-mazda-bt-50-up-ur-front-fixed-offset-upper-control-arm-kit","provider":"Black Ops Auto Works","version":"1.0","type":"link"}