{"product_id":"superpro-trc1078-front-lower-control-arm-set-2014-2020-nissan-rogue","title":"SuperPro 14-20 Nissan Rogue Front Lower Control Arm Set","description":"\u003ch4\u003eFully Assembled Front Lower Control Arms with Pre-Installed SuperPro Bushings for the 2014 Through 2020 Nissan Rogue\u003c\/h4\u003e\n\n\u003cp\u003eThe SuperPro TRC1078 is a complete front lower control arm set engineered as a direct replacement for the 2014, 2015, 2016, 2017, 2018, 2019, and 2020 Nissan Rogue. Unlike bushing-only kits that require press-in installation, the TRC1078 control arms arrive fully assembled with SuperPro's proprietary polyurethane bushings and new ball joints pre-installed, allowing a straightforward bolt-on installation without a shop press or special tooling. Each arm is manufactured with SuperPro's engineering-grade polyurethane compound, which is formulated to resist degradation from temperature extremes, oils, brake fluid, and road chemicals that accelerate the breakdown of OEM rubber bushings over time. The TRC1078 delivers the geometry correction and long-term durability that the Rogue's front suspension demands, particularly on vehicles that have accumulated enough mileage for OEM rubber to crack or deform. SuperPro backs the TRC1078 with a limited lifetime warranty and draws on over 40 years of suspension development in Australia's demanding road conditions.\u003c\/p\u003e\n\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFully Assembled with Pre-Installed Bushings and Ball Joints:\u003c\/strong\u003e No pressing required. The TRC1078 arrives ready to bolt on with all bushings and new ball joints installed at the factory, making it a true drop-in upgrade for the 2014 through 2020 Nissan Rogue.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSuperPro Proprietary Polyurethane:\u003c\/strong\u003e Engineered-grade polyurethane compound resists oils, coolant, water, and temperature extremes that degrade OEM rubber bushings over time.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eComplete Front Suspension Refresh:\u003c\/strong\u003e New arm, new bushings, and new ball joints in one purchase eliminates the need to source separate components for a full front lower arm replacement.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eImproved Steering Geometry:\u003c\/strong\u003e SuperPro's bushing design maintains correct caster and camber geometry for consistent tire wear and straight-line tracking.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLifetime Warranty:\u003c\/strong\u003e SuperPro backs the TRC1078 with a lifetime warranty against defects in materials and workmanship.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDeveloped in Australia:\u003c\/strong\u003e Over 40 years of suspension development in extreme conditions informs every SuperPro bushing compound and arm design.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch4\u003eWhat's Included\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e2 x SuperPro TRC1078 Front Lower Control Arms (driver and passenger side, fully assembled)\u003c\/li\u003e\n\u003cli\u003ePre-installed SuperPro polyurethane bushings\u003c\/li\u003e\n\u003cli\u003ePre-installed new ball joints\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch4\u003eSpecifications\u003c\/h4\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eDetail\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eManufacturer Part Number (MPN)\u003c\/td\u003e\n\u003ctd\u003eTRC1078\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eUPC\u003c\/td\u003e\n\u003ctd\u003eVerify with supplier\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eSuperPro\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePosition\u003c\/td\u003e\n\u003ctd\u003eFront Lower\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSet Includes\u003c\/td\u003e\n\u003ctd\u003eDriver and Passenger Side Arms\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBushing Material\u003c\/td\u003e\n\u003ctd\u003eSuperPro Proprietary Engineering-Grade Polyurethane\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBall Joints\u003c\/td\u003e\n\u003ctd\u003eIncluded (Pre-Installed)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInstallation Method\u003c\/td\u003e\n\u003ctd\u003eDirect Bolt-On (no press required)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWarranty\u003c\/td\u003e\n\u003ctd\u003eLimited Lifetime\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDeveloped and Manufactured\u003c\/td\u003e\n\u003ctd\u003eAustralia\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch4\u003eFitment\u003c\/h4\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eYear\u003c\/th\u003e\n\u003cth\u003eMake\u003c\/th\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003cth\u003eTrim\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e2014\u003c\/td\u003e\n\u003ctd\u003eNissan\u003c\/td\u003e\n\u003ctd\u003eRogue\u003c\/td\u003e\n\u003ctd\u003eS, SV, SL\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2015\u003c\/td\u003e\n\u003ctd\u003eNissan\u003c\/td\u003e\n\u003ctd\u003eRogue\u003c\/td\u003e\n\u003ctd\u003eS, SV, SL\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2016\u003c\/td\u003e\n\u003ctd\u003eNissan\u003c\/td\u003e\n\u003ctd\u003eRogue\u003c\/td\u003e\n\u003ctd\u003eS, SV, SL\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2017\u003c\/td\u003e\n\u003ctd\u003eNissan\u003c\/td\u003e\n\u003ctd\u003eRogue\u003c\/td\u003e\n\u003ctd\u003eS, SV, SL, SL Platinum\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2018\u003c\/td\u003e\n\u003ctd\u003eNissan\u003c\/td\u003e\n\u003ctd\u003eRogue\u003c\/td\u003e\n\u003ctd\u003eS, SV, SL, SL Platinum\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2019\u003c\/td\u003e\n\u003ctd\u003eNissan\u003c\/td\u003e\n\u003ctd\u003eRogue\u003c\/td\u003e\n\u003ctd\u003eS, SV, SL, SL Platinum\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2020\u003c\/td\u003e\n\u003ctd\u003eNissan\u003c\/td\u003e\n\u003ctd\u003eRogue\u003c\/td\u003e\n\u003ctd\u003eS, SV, SL, SL Platinum\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch4\u003eFrequently Asked Questions\u003c\/h4\u003e\n\u003col\u003e\n\u003cli\u003e\n\u003cstrong\u003eDo I need a press to install the SuperPro TRC1078 on my Nissan Rogue?\u003c\/strong\u003e\u003cbr\u003eNo. The TRC1078 control arms ship fully assembled with SuperPro polyurethane bushings and new ball joints pre-installed at the factory. They bolt directly onto the Rogue subframe and knuckle without a shop press, making them suitable for a DIY installation with standard hand tools.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHow is the TRC1078 better than replacing just the bushings on my original Nissan Rogue control arm?\u003c\/strong\u003e\u003cbr\u003eBushing-only kits require removing the old rubber bushings from the original arm using a press, inspecting the arm for cracks or wear, and pressing in new bushings. The TRC1078 arrives as a complete assembly with a new arm, new SuperPro bushings, and a new ball joint. This eliminates the risk of installing bushings into a worn arm and saves significant labor time.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWill I need a wheel alignment after installing the TRC1078?\u003c\/strong\u003e\u003cbr\u003eYes. Any lower control arm replacement changes the front suspension geometry and requires a professional wheel alignment after installation to restore correct caster, camber, and toe settings for even tire wear and straight tracking.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDoes the TRC1078 come with a warranty?\u003c\/strong\u003e\u003cbr\u003eYes. SuperPro backs the TRC1078 with a lifetime warranty against defects in materials and workmanship. Contact SuperPro with proof of purchase for warranty support.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHow does the SuperPro polyurethane bushing in the TRC1078 compare to OEM rubber?\u003c\/strong\u003e\u003cbr\u003eOEM rubber bushings absorb vibration but degrade over time from heat cycling, fluid exposure, and UV. SuperPro's engineering-grade polyurethane resists all of these degradation mechanisms, maintains consistent geometry longer, and delivers more precise steering feel while still providing acceptable road noise isolation for daily driving on the Rogue.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDoes the TRC1078 fit the Nissan Rogue Sport or only the standard Rogue?\u003c\/strong\u003e\u003cbr\u003eThe TRC1078 is fitment-confirmed for the 2014 through 2020 Nissan Rogue (T32 platform). Verify fitment for the Rogue Sport (Qashqai platform) separately before ordering, as suspension geometry differs between the two models.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCan the TRC1078 be used on a Rogue with a lift kit or lowered suspension?\u003c\/strong\u003e\u003cbr\u003eThe TRC1078 is designed as a direct OEM replacement for stock-height 2014 through 2020 Nissan Rogue applications. Modified ride height or suspension geometry may affect fitment and ball joint angle. Consult a suspension specialist before ordering for lifted or lowered applications.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIs the Magnuson-Moss Warranty Act relevant to this product?\u003c\/strong\u003e\u003cbr\u003eYes. Under the Magnuson-Moss Warranty Act, installing the SuperPro TRC1078 on your Nissan Rogue cannot void your vehicle's manufacturer warranty unless the dealer can demonstrate that the aftermarket part directly caused a failure. Your vehicle warranty remains in force for all unrelated systems after installation.\u003c\/li\u003e\n\u003c\/ol\u003e\n\n\u003ch4\u003eInstall Instructions\u003c\/h4\u003e\n\u003cp\u003eSafely lift and support the 2014 through 2020 Nissan Rogue on jack stands with full access to both front wheels. Remove the front wheels. Disconnect the front sway bar end link from the control arm if attached. Remove the ball joint pinch bolt at the steering knuckle and use a pickle fork or ball joint separator to free the ball joint stud from the knuckle. Remove the rear and front control arm mounting bolts at the subframe. Lower the control arm and remove it from the vehicle. Position the SuperPro TRC1078 onto the subframe mounting points, install the front and rear mounting bolts, and hand thread before torquing to factory specification with the suspension at ride height. Insert the ball joint stud into the steering knuckle and torque the pinch bolt to spec. Reattach the sway bar end link. Reinstall the wheels and torque lug nuts. Have a professional wheel alignment performed before returning the vehicle to normal use.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eCalifornia Proposition 65 Warning:\u003c\/strong\u003e This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects, or other reproductive harm. For more information, visit \u003ca href=\"https:\/\/www.p65warnings.ca.gov\"\u003ewww.p65warnings.ca.gov\u003c\/a\u003e.\u003c\/p\u003e","brand":"Superpro","offers":[{"title":"Default Title","offer_id":45971314999375,"sku":"SPRTRC1078","price":251.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1062\/7920\/files\/superpro-14-20-nissan-rogue-front-lower-control-arm-set-superpro.jpg?v=1782494945","url":"https:\/\/www.blackopsautoworks.com\/products\/superpro-trc1078-front-lower-control-arm-set-2014-2020-nissan-rogue","provider":"Black Ops Auto Works","version":"1.0","type":"link"}