{"product_id":"swift-200-2550-100-bp-special-coilover-spring","title":"Swift 200-2550-100 BP Conical Bulletproof Spring - 20in x 2.5in ID \/ 5in OD, 100lb\/in","description":"\u003ch4\u003eMatch the Spring to Your Suspension\u003c\/h4\u003e\n\u003cp\u003eSwift 200-2550-100 BP is an individual conical bulletproof spring with 20-inch nominal free length, 2.5-inch inner diameter at one end and 5-inch outside diameter at the other and a published 100 lb\/in spring rate. Match the spring-seat interface, installed envelope, required corner rate and full suspension travel before selecting this configuration. Conical Bulletproof design has a 2.5-inch inner diameter at one end and a 5-inch outside diameter at the other end. Swift describes the conical family as providing close coil stacking and extended travel using its Bulletproof material. Swift identifies dimension-matched front Late Model and Pro Late Model setups, and left-rear Sportsman Modified setups.\u003c\/p\u003e\n\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eOne individual conical bulletproof spring.\u003c\/li\u003e\n\u003cli\u003eNominal free length: 20 in; dimensions: 2.5in ID \/ 5in OD.\u003c\/li\u003e\n\u003cli\u003ePublished rate: 100 lb\/in.\u003c\/li\u003e\n\u003cli\u003eUsable stroke: 15.0 in; maximum stroke: 15.0 in.\u003c\/li\u003e\n\u003cli\u003ePublished maximum spring load: 1,515 lb.\u003c\/li\u003e\n\u003cli\u003eSwift proprietary HS5.TW spring material.\u003c\/li\u003e\n\u003cli\u003eConical Bulletproof design has a 2.5-inch inner diameter at one end and a 5-inch outside diameter at the other end.\u003c\/li\u003e\n\u003cli\u003eSwift describes the conical family as providing close coil stacking and extended travel using its Bulletproof material.\u003c\/li\u003e\n\u003cli\u003eSwift identifies dimension-matched front Late Model and Pro Late Model setups, and left-rear Sportsman Modified setups.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eApplication details and restrictions\u003c\/h4\u003e\n\u003cp\u003eUniversal dimensional selection for a compatible suspension arrangement. The listed dimensions do not establish bolt-on fitment for every vehicle or coilover. Confirm 2.5-inch inner diameter at one end and 5-inch outside diameter at the other, 20-inch nominal free length, the required rate, seat shape, retention at full droop and usable travel with the chassis or damper manufacturer. Check clearances throughout full suspension movement. Intended position\/application: Front Late\/Pro Late Models or left-rear Sportsman Modifieds, subject to chassis requirements. No vehicle year\/make\/model coverage or fixed lowering amount is assigned. The 5-inch dimension is OUTSIDE diameter at the larger end; do not treat it as a 5-inch inner diameter.\u003c\/p\u003e\n\n\u003ch4\u003eSpecifications\u003c\/h4\u003e\n\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eBrand\u003c\/th\u003e\n\u003ctd\u003eSwift Springs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eManufacturer Part Number\u003c\/th\u003e\n\u003ctd\u003e200-2550-100 BP\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eProduct Family\u003c\/th\u003e\n\u003ctd\u003eConical Bulletproof Springs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eQuantity\u003c\/th\u003e\n\u003ctd\u003eOne spring \/ sold individually\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eNominal Free Length\u003c\/th\u003e\n\u003ctd\u003e20 in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eEnd Dimensions\u003c\/th\u003e\n\u003ctd\u003e2.5in ID \/ 5in OD\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePublished Spring Rate\u003c\/th\u003e\n\u003ctd\u003e100 lb\/in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eUsable Stroke\u003c\/th\u003e\n\u003ctd\u003e15.0 in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMaximum Stroke\u003c\/th\u003e\n\u003ctd\u003e15.0 in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePublished Maximum Spring Load\u003c\/th\u003e\n\u003ctd\u003e1,515 lb\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eIntended Position \/ Application\u003c\/th\u003e\n\u003ctd\u003eFront Late\/Pro Late Models or left-rear Sportsman Modifieds, subject to chassis requirements\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eSwift proprietary HS5.TW spring material\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCondition\u003c\/th\u003e\n\u003ctd\u003eNew\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch4\u003eWhat's Included\u003c\/h4\u003e\n\u003cp\u003eOne Swift conical bulletproof spring in this part-number configuration. Selling and retail prices are for one spring. Additional springs, dampers, perches, adapters, spring rubbers, top mounts and installation hardware are not listed as included. Select supporting components for the complete suspension setup.\u003c\/p\u003e\n\u003cp\u003eRepresentative family photo: the hero shows one Swift conical bulletproof spring from this dimensional family. Actual free length, coil spacing, wire diameter, coil count and printed markings vary by part number. The photograph is not a scale drawing; select by the full manufacturer part number and specification table.\u003c\/p\u003e\n\n\u003ch4\u003eAbout Swift Springs\u003c\/h4\u003e\n\u003cp\u003eSwift develops springs for motorsports suspension tuning on dirt and pavement. Its range includes standard and barrel profiles, Quarter Midget and Legend configurations, Tight Helix designs, progressive springs and Bulletproof or conical springs. Swift uses its proprietary material and family-specific design to support individual corner requirements. The full part number, published dimensions and travel remain the selection criteria. Performance depends on chassis setup, damper characteristics, supporting components and installation.\u003c\/p\u003e\n\n\u003ch4\u003eRelated Parts\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/collections\/swift-springs\"\u003eShop Swift Springs\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/collections\/coilover-springs\"\u003eCompare coilover springs\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/collections\/coilover-components\"\u003eFind coilover components\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003ca href=\"https:\/\/www.swiftsprings.com\/pages\/standard-coilover-springs#conicalSprings\"\u003eStandard Coilover Conical Springs\u003c\/a\u003e\u003c\/p\u003e\n\n\u003ch4\u003eFAQ\u003c\/h4\u003e\n\u003cstrong\u003eWhat is the 200-2550-100 BP?\u003c\/strong\u003e\u003cp\u003eOne Swift conical bulletproof spring with 20-inch nominal free length, 2.5-inch inner diameter at one end and 5-inch outside diameter at the other and a published 100 lb\/in rate.\u003c\/p\u003e\n\u003cstrong\u003eHow many springs are included?\u003c\/strong\u003e\u003cp\u003eOne Swift conical bulletproof spring in this part-number configuration. Selling and retail prices are for one spring. Additional springs, dampers, perches, adapters, spring rubbers, top mounts and installation hardware are not listed as included. Select supporting components for the complete suspension setup.\u003c\/p\u003e\n\u003cstrong\u003eDoes Universal Fit establish vehicle fitment?\u003c\/strong\u003e\u003cp\u003eUniversal dimensional selection for a compatible suspension arrangement. The listed dimensions do not establish bolt-on fitment for every vehicle or coilover. Confirm 2.5-inch inner diameter at one end and 5-inch outside diameter at the other, 20-inch nominal free length, the required rate, seat shape, retention at full droop and usable travel with the chassis or damper manufacturer. Check clearances throughout full suspension movement. Intended position\/application: Front Late\/Pro Late Models or left-rear Sportsman Modifieds, subject to chassis requirements. No vehicle year\/make\/model coverage or fixed lowering amount is assigned. The 5-inch dimension is OUTSIDE diameter at the larger end; do not treat it as a 5-inch inner diameter.\u003c\/p\u003e\n\u003cstrong\u003eWhich dimensions need to match?\u003c\/strong\u003e\u003cp\u003eMatch the spring seats and full installed envelope to 2.5-inch inner diameter at one end and 5-inch outside diameter at the other. Check nominal free length, the full working stroke and retention at full droop. The larger-end 5-inch dimension is outside diameter.\u003c\/p\u003e\n\u003cstrong\u003eWhich family-specific setup notes apply?\u003c\/strong\u003e\u003cp\u003eConical Bulletproof design has a 2.5-inch inner diameter at one end and a 5-inch outside diameter at the other end. Swift describes the conical family as providing close coil stacking and extended travel using its Bulletproof material. Swift identifies dimension-matched front Late Model and Pro Late Model setups, and left-rear Sportsman Modified setups.\u003c\/p\u003e\n\u003cstrong\u003eWhat do the stroke and load specifications mean?\u003c\/strong\u003e\u003cp\u003eUsable stroke: 15.0 in; maximum stroke: 15.0 in; published maximum spring load: 1,515 lb. Maximum stroke is not a recommended operating target. The load value is not a vehicle payload, axle or towing rating. Match the complete spring and damper requirements.\u003c\/p\u003e\n\u003cstrong\u003eDoes the photograph show this exact length and rate?\u003c\/strong\u003e\u003cp\u003eRepresentative family photo: the hero shows one Swift conical bulletproof spring from this dimensional family. Actual free length, coil spacing, wire diameter, coil count and printed markings vary by part number. The photograph is not a scale drawing; select by the full manufacturer part number and specification table.\u003c\/p\u003e\n\u003cstrong\u003eDoes it provide a fixed lowering amount?\u003c\/strong\u003e\u003cp\u003eNo fixed lowering amount is assigned. Ride height and spring interaction depend on installed height, spring seats, corner loads and the full chassis setup. Use a qualified suspension specialist for selection and installation.\u003c\/p\u003e\n\n\u003ch4\u003eInstallation Instructions\u003c\/h4\u003e\n\u003cp\u003eHave a qualified race suspension technician follow the chassis, damper and component manufacturer’s instructions. Safely unload stored spring tension before disassembly. Confirm the part number, spring-seat dimensions, nominal free length, rate and intended arrangement. Inspect the spring seats and supporting components. Verify full-droop retention, usable travel and all clearances through suspension movement. Confirm spring-rubber or adapter requirements for the selected family. Check fastener torque, alignment and the complete chassis setup before operation.\u003c\/p\u003e\n","brand":"Swift Springs","offers":[{"title":"Default Title","offer_id":68216774492239,"sku":"200-2550-100 BP","price":135.85,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1062\/7920\/files\/swift-conical-bulletproof-single-spring-representative-1000.webp?v=1794939852","url":"https:\/\/www.blackopsautoworks.com\/products\/swift-200-2550-100-bp-special-coilover-spring","provider":"Black Ops Auto Works","version":"1.0","type":"link"}