{"product_id":"swift-4t919r-lowering-springs","title":"Swift Spec-R Springs - 2020-2026 Toyota GR Supra 3.0","description":"\u003ch4\u003eA Matched Spring Set for Toyota GR Supra 3.0\u003c\/h4\u003e\n\u003cp\u003eSwift Spec-R springs give the 2020-2026 Toyota GR Supra 3.0 an application-specific ride-height and handling upgrade. This set combines 4.8 kgf\/mm front and 12.0 kgf\/mm rear spring rates with nominal lowering of 1.2 inch front and 1.2 inch rear. Select 4T919R by the supported chassis, factory suspension and application requirements below.\u003c\/p\u003e\n\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eSpec-R design intended to improve chassis control, steering response and cornering feel.\u003c\/li\u003e\n\u003cli\u003eFront spring rate: 4.8 kgf\/mm; rear spring rate: 12.0 kgf\/mm.\u003c\/li\u003e\n\u003cli\u003eNominal lowering: 1.2 inch front and 1.2 inch rear.\u003c\/li\u003e\n\u003cli\u003eFront and rear spring set for the stated vehicle application.\u003c\/li\u003e\n\u003cli\u003eDesigned around the supported factory damper arrangement; assess damper condition before installation.\u003c\/li\u003e\n\u003cli\u003eApplication-specific stance with street use considered alongside performance.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eApplication details and restrictions\u003c\/h4\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eYears\u003c\/th\u003e\n\u003cth\u003eMake\u003c\/th\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003cth\u003eChassis\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\u003ctr\u003e\n\u003ctd\u003e2020-2026\u003c\/td\u003e\n\u003ctd\u003eToyota\u003c\/td\u003e\n\u003ctd\u003eGR Supra\u003c\/td\u003e\n\u003ctd\u003eA90\/A91; 3.0L\u003c\/td\u003e\n\u003c\/tr\u003e\u003c\/tbody\u003e\n\u003c\/table\u003e\u003cp\u003eFor the A90\/A91 GR Supra 3.0-liter application within the listed years. This listing does not establish compatibility with the 2.0-liter model or aftermarket coilover conversions. Match the supported original damper and spring-seat arrangement. Nominal lowering is measured from the applicable factory ride height.\u003c\/p\u003e\n\u003cp\u003eInspect existing suspension modifications before ordering. Nominal lowering is measured against the supported factory configuration; it is not a guaranteed measurement on every vehicle.\u003c\/p\u003e\n\n\u003ch4\u003eSpecifications\u003c\/h4\u003e\n\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eBrand\u003c\/th\u003e\n\u003ctd\u003eSwift Springs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eManufacturer Part Number\u003c\/th\u003e\n\u003ctd\u003e4T919R\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eProduct Type\u003c\/th\u003e\n\u003ctd\u003eLowering Springs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eProduct Line\u003c\/th\u003e\n\u003ctd\u003eSpec-R\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFront Spring Rate\u003c\/th\u003e\n\u003ctd\u003e4.8 kgf\/mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eRear Spring Rate\u003c\/th\u003e\n\u003ctd\u003e12.0 kgf\/mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eNominal Front Lowering\u003c\/th\u003e\n\u003ctd\u003e1.2 in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eNominal Rear Lowering\u003c\/th\u003e\n\u003ctd\u003e1.2 in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eApplication Chassis\u003c\/th\u003e\n\u003ctd\u003eA90\/A91; 3.0L\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eAxle Coverage\u003c\/th\u003e\n\u003ctd\u003eFront and rear\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCondition\u003c\/th\u003e\n\u003ctd\u003eNew\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch4\u003eWhat's Included\u003c\/h4\u003e\n\u003cp\u003eOne Swift Spec-R front and rear spring set, manufacturer part number 4T919R. Dampers, mounts, isolators, bump stops and vehicle service hardware are not listed as included components of this spring set.\u003c\/p\u003e\n\u003cp\u003ePhoto note: The lead image represents the Swift Spec-R spring-set product family. Actual spring shape, dimensions and markings vary by application. Choose the set using the part number, fitment and specifications rather than the photo alone.\u003c\/p\u003e\n\n\u003ch4\u003eAbout Swift Springs\u003c\/h4\u003e\n\u003cp\u003eSwift develops performance springs for vehicle-specific and dimension-selected suspension applications. Its Spec-R line uses application-specific rates and ride-height targets to improve body control while considering usable suspension travel and street driving. Match 4T919R to the supported factory suspension; the Spec-R family name alone does not establish interchangeability.\u003c\/p\u003e\n\n\u003ch4\u003eRelated Parts\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/collections\/swift-springs\"\u003eShop Swift Springs\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/collections\/lowering-springs\"\u003eCompare lowering springs\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/collections\/suspension\"\u003ePlan supporting suspension parts\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/www.swiftsprings.com\/pages\/swift-performance-springs#TOYOTA\"\u003eToyota Swift Performance Springs\u003c\/a\u003e\u003c\/p\u003e\n\u003ch4\u003eFAQ\u003c\/h4\u003e\n\u003cstrong\u003eWhat is the 4T919R?\u003c\/strong\u003e\u003cp\u003eIt is the Swift Spec-R front and rear lowering spring set for the 2020-2026 Toyota GR Supra 3.0.\u003c\/p\u003e\n\u003cstrong\u003eWhich vehicle and chassis does this set fit?\u003c\/strong\u003e\u003cp\u003eFor the A90\/A91 GR Supra 3.0-liter application within the listed years. This listing does not establish compatibility with the 2.0-liter model or aftermarket coilover conversions. Match the supported original damper and spring-seat arrangement. Nominal lowering is measured from the applicable factory ride height.\u003c\/p\u003e\n\u003cstrong\u003eHow much does this set lower the vehicle?\u003c\/strong\u003e\u003cp\u003eSwift lists nominal lowering of 1.2 inch at the front and 1.2 inch at the rear. Final ride height varies with factory equipment, vehicle condition and the rest of the suspension setup.\u003c\/p\u003e\n\u003cstrong\u003eWhat are the front and rear spring rates?\u003c\/strong\u003e\u003cp\u003eThe front rate is 4.8 kgf\/mm and the rear rate is 12.0 kgf\/mm. Compare front and rear specifications separately when planning suspension changes.\u003c\/p\u003e\n\u003cstrong\u003eCan the factory dampers be retained?\u003c\/strong\u003e\u003cp\u003eThe application is developed around the supported factory suspension. Have the installer assess damper wear and usable travel. Compatibility with every aftermarket coilover, modified spring seat or damper conversion is not implied.\u003c\/p\u003e\n\u003cstrong\u003eAre shocks, mounts and installation hardware included?\u003c\/strong\u003e\u003cp\u003eThis listing is for the spring set. Additional suspension components and vehicle service hardware are not listed as included; inspect and replace worn or single-use items as required by the vehicle service procedure.\u003c\/p\u003e\n\u003cstrong\u003eIs an alignment needed after installation?\u003c\/strong\u003e\u003cp\u003eComplete a professional four-wheel alignment after installation and settling. Check spring seating, suspension travel, tire clearance and all fasteners before normal driving.\u003c\/p\u003e\n\u003cstrong\u003eDoes the spring-set photo show the exact application?\u003c\/strong\u003e\u003cp\u003eThe lead photo represents the Swift Spec-R product family. Spring shape, dimensions and markings can differ for the selected application; the specifications and fitment determine the correct set.\u003c\/p\u003e\n\n\u003ch4\u003eInstallation Instructions\u003c\/h4\u003e\n\u003cp\u003eConfirm 4T919R and the complete vehicle application before work begins. Have a qualified installer follow the current Swift instructions and the vehicle manufacturer’s service procedure. Use an appropriate spring compressor where required. Inspect mounts, isolators, bump stops and dampers, replace any single-use hardware, and torque fasteners at the specified suspension position. Verify spring seating, suspension travel, brake-line and tire clearance, then complete a professional alignment after installation and settling.\u003c\/p\u003e\n","brand":"Swift Springs","offers":[{"title":"Default Title","offer_id":68219598372943,"sku":"4T919R","price":323.89,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1062\/7920\/files\/swift-4t919r-lowering-spring-set-1000.webp?v=1794947441","url":"https:\/\/www.blackopsautoworks.com\/products\/swift-4t919r-lowering-springs","provider":"Black Ops Auto Works","version":"1.0","type":"link"}