{"product_id":"thermal-rd-b945-c920-cd-f150-ecoboost-catback-dual-coated-tips","title":"Thermal R\u0026D 3in Catback Exhaust - Dual Coated Tips - 2021-2025 Ford F-150 EcoBoost SuperCab","description":"\u003ch4\u003eTurn Up The EcoBoost Twin Turbo Growl\u003c\/h4\u003e\u003cp\u003eFord tuned the F-150 EcoBoost exhaust to be quiet under the hood. This catback gives it a voice worth hearing without turning a daily commute into a chore.\u003c\/p\u003e\u003cp\u003eThe B945-C920-CD from Thermal R\u0026amp;D uses full 3 inch mandrel bent T304 stainless steel tubing paired with a 3 chamber Helmholtz muffler, so the F-150 gets a stronger exhaust note under throttle while staying composed at highway cruise.\u003c\/p\u003e\u003ch4\u003eKey Features\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eFull 3 inch mandrel bent T304 stainless steel tubing from the catalytic converter connection back\u003c\/li\u003e\n\u003cli\u003eTrue Helmholtz Technology chamber design cancels low frequency cabin drone at cruise\u003c\/li\u003e\n\u003cli\u003eSingle exit rear section splitting into dual coated tips\u003c\/li\u003e\n\u003cli\u003eBlack Ceramic Coated tip finish\u003c\/li\u003e\n\u003cli\u003eDirect bolt on installation using factory hanger and mounting locations\u003c\/li\u003e\n\u003cli\u003eNo cutting, drilling, or welding required\u003c\/li\u003e\n\u003cli\u003eConnects behind the factory catalytic converter, emissions equipment stays untouched\u003c\/li\u003e\n\u003cli\u003eBacked by Thermal R\u0026amp;D's Lifetime Manufacturer's Warranty\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eFitment\u003c\/h4\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eYear Range\u003c\/th\u003e\n\u003cth\u003eMake\u003c\/th\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003cth\u003eTrim\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2021-2025\u003c\/td\u003e\n\u003ctd\u003eFord\u003c\/td\u003e\n\u003ctd\u003eF-150\u003c\/td\u003e\n\u003ctd\u003eXL\/XLT\/Lariat 2.7L \u0026amp; 3.5L EcoBoost\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003ch4\u003eSpecifications\u003c\/h4\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eDetail\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTube Diameter\u003c\/td\u003e\n\u003ctd\u003e3 inch mandrel bent T304 stainless steel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMuffler Design\u003c\/td\u003e\n\u003ctd\u003e3 chamber Helmholtz drone canceling muffler\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eExit Configuration\u003c\/td\u003e\n\u003ctd\u003eSingle exit rear section splitting into dual coated tips\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTip Finish\u003c\/td\u003e\n\u003ctd\u003eBlack Ceramic Coated\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCab \/ Bed Configuration\u003c\/td\u003e\n\u003ctd\u003eSingle Cab 6.5ft Bed, Single Exit, Dual Coated Tips\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWheelbase\u003c\/td\u003e\n\u003ctd\u003e122.5 in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInstallation\u003c\/td\u003e\n\u003ctd\u003eDirect bolt on, no cutting or welding required\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWarranty\u003c\/td\u003e\n\u003ctd\u003eLifetime Manufacturer's Warranty\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMPN\u003c\/td\u003e\n\u003ctd\u003eB945-C920-CD\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eUPC\u003c\/td\u003e\n\u003ctd\u003eNot published by manufacturer\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003cp\u003eEvery B945-C920-CD system ships fully assembled and ready for a direct bolt on install, so there is no fabrication or trimming needed to get it seated correctly.\u003c\/p\u003e\u003ch4\u003eWhat's Included\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eComplete B945-C920-CD catback exhaust system (mid pipe, muffler, and tailpipe sections)\u003c\/li\u003e\n\u003cli\u003eExhaust tip(s) as specified for this configuration\u003c\/li\u003e\n\u003cli\u003eAll necessary clamps and mounting hardware\u003c\/li\u003e\n\u003cli\u003eInstallation instructions\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eAbout Thermal R\u0026amp;D\u003c\/h4\u003e\u003cp\u003eThermal R\u0026amp;D Performance designs and builds every exhaust system in house, focusing on drone free sound through True Helmholtz Technology. Each system is constructed from mandrel bent T304 stainless steel for long term corrosion resistance and is backed by a Lifetime Manufacturer's Warranty.\u003c\/p\u003e\u003ch4\u003eFrequently Asked Questions\u003c\/h4\u003e\u003cstrong\u003eWhat is the B945-C920-CD?\u003c\/strong\u003e\u003cp\u003eThe B945-C920-CD is a Thermal R\u0026amp;D 3 inch catback exhaust engineered for the 2021-2025 Ford F-150 2.7L \u0026amp; 3.5L EcoBoost, specifically the Single Cab 6.5ft Bed, Single Exit, Dual Coated Tips configuration.\u003c\/p\u003e\u003cstrong\u003eWill this exhaust trigger a check engine light?\u003c\/strong\u003e\u003cp\u003eNo. The system connects behind the factory catalytic converter and does not touch any emissions equipment, so there is no impact to OBD monitors.\u003c\/p\u003e\u003cstrong\u003eDo I need to modify my truck to install this?\u003c\/strong\u003e\u003cp\u003eNo cutting or welding is required. The system uses the factory hanger locations and bolts up to the OEM catalytic converter flange.\u003c\/p\u003e\u003cstrong\u003eWill I need an alignment after installing this exhaust?\u003c\/strong\u003e\u003cp\u003eNo. This is an exhaust system only and does not affect suspension geometry or require an alignment.\u003c\/p\u003e\u003cstrong\u003eDoes this exhaust work with a leveling kit or lift installed on my 2021-2025 F-150?\u003c\/strong\u003e\u003cp\u003eYes. Since the system follows the factory exhaust routing and hanger points, a modest leveling kit or lift does not affect fitment.\u003c\/p\u003e\u003cstrong\u003eIs professional installation required?\u003c\/strong\u003e\u003cp\u003eMost owners with basic hand tools and a floor jack or ramps can install this system in a home garage in an afternoon.\u003c\/p\u003e\u003cstrong\u003eWhat is the difference between the polished and coated tip finish?\u003c\/strong\u003e\u003cp\u003eBoth finishes use the same T304 stainless steel tip. Polished tips have a bright mirror finish, while ceramic coated tips have a matte black heat resistant coating for a more subdued look.\u003c\/p\u003e\u003cstrong\u003eIs there a break in period for this exhaust?\u003c\/strong\u003e\u003cp\u003eNo break in period is required. The system performs at full capability immediately after installation.\u003c\/p\u003e\u003cstrong\u003eDoes this system fit both 2WD and 4WD trucks?\u003c\/strong\u003e\u003cp\u003eYes, the catback exhaust mounts behind the transmission and transfer case area and fits both 2WD and 4WD versions of this cab and bed configuration.\u003c\/p\u003e\u003cstrong\u003eWhat is covered under the warranty?\u003c\/strong\u003e\u003cp\u003eThermal R\u0026amp;D backs this system with a Lifetime Manufacturer's Warranty against manufacturing defects in materials and welds.\u003c\/p\u003e\u003ch4\u003eInstallation Instructions\u003c\/h4\u003e\u003col\u003e\n\u003cli\u003eRaise and safely support the vehicle on jack stands or a lift, then allow the exhaust system to cool completely before beginning work.\u003c\/li\u003e\n\u003cli\u003eApply penetrating oil to the factory exhaust clamps and hanger points, then loosen and remove the factory system from the catalytic converter flange.\u003c\/li\u003e\n\u003cli\u003eDisconnect the factory exhaust from all rubber isolator hangers and remove it from the vehicle.\u003c\/li\u003e\n\u003cli\u003eLubricate the new hanger mounting points with soapy water to ease installation of the rubber isolators.\u003c\/li\u003e\n\u003cli\u003eInstall the new mid pipe section to the factory catalytic converter connection using the provided band clamp, leaving it slightly loose for adjustment.\u003c\/li\u003e\n\u003cli\u003eInstall the muffler section into the factory hanger locations and connect it to the mid pipe with the provided clamp.\u003c\/li\u003e\n\u003cli\u003eAttach the tailpipe section and slide on the exhaust tip(s), aligning them level with the rear bumper opening.\u003c\/li\u003e\n\u003cli\u003eAdjust the entire system for even hanger tension and consistent gaps, then torque all clamps to the manufacturer's specification.\u003c\/li\u003e\n\u003c\/ol\u003e","brand":"Thermal R\u0026D","offers":[{"title":"Default Title","offer_id":46346226630735,"sku":"B945-C920-CD","price":999.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1062\/7920\/files\/thermal-rd-b945-c920-cd-ford-f150-ecoboost-catback-exhaust.jpg?v=1785852172","url":"https:\/\/www.blackopsautoworks.com\/products\/thermal-rd-b945-c920-cd-f150-ecoboost-catback-dual-coated-tips","provider":"Black Ops Auto Works","version":"1.0","type":"link"}