{"product_id":"ticon-industries-tic903-03271-1000-ss304-5in-teardrop-exhaust-tip","title":"Ticon Industries Sequence Manufacturing SS304 5in Teardrop Exhaust Tip","description":"\u003ch4\u003eThe Clean, Aggressive Finish Your Exhaust System Deserves at the Exit Point\u003c\/h4\u003e\n\u003cp\u003eThe Ticon Industries TIC903-03271-1000 is a 5-inch SS304 stainless steel teardrop exhaust tip produced under Ticon's Sequence Manufacturing line. Built from 304-grade stainless steel and finished to a polished exterior, the teardrop shape delivers an assertive, purposeful look that stands apart from round or slash-cut alternatives. The TIC903-03271-1000 is a weld-on application designed for builders and fabricators who want a quality tip that holds its finish under the sustained heat and condensation cycle of an exhaust system. SS304 is the benchmark material for exhaust tips: highly resistant to corrosion, blue discoloration, and surface scaling at sustained exhaust gas temperatures.\u003c\/p\u003e\n\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eSS304 stainless steel construction for maximum corrosion resistance and long-term finish retention\u003c\/li\u003e\n\u003cli\u003e5-inch teardrop profile for an aggressive, distinctive exhaust exit appearance\u003c\/li\u003e\n\u003cli\u003ePolished exterior finish that resists bluing and scaling at sustained exhaust temperatures\u003c\/li\u003e\n\u003cli\u003eWeld-on installation for a permanent, rattle-free fitment with no clamps or hardware\u003c\/li\u003e\n\u003cli\u003eManufactured under Ticon Industries' Sequence Manufacturing program for consistent dimensional tolerances\u003c\/li\u003e\n\u003cli\u003eCompatible with high-flow aftermarket exhaust builds, custom fabrications, and replacement tip applications\u003c\/li\u003e\n\u003cli\u003eUniversal fitment for use across a wide variety of performance vehicle applications\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch4\u003eSpecifications\u003c\/h4\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eDetail\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003ePart Number\u003c\/td\u003e\n\u003ctd\u003eTIC903-03271-1000\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eTicon Industries \/ Sequence Manufacturing\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOutlet Size\u003c\/td\u003e\n\u003ctd\u003e5 inch\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTip Style\u003c\/td\u003e\n\u003ctd\u003eTeardrop\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaterial\u003c\/td\u003e\n\u003ctd\u003eSS304 Stainless Steel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFinish\u003c\/td\u003e\n\u003ctd\u003ePolished stainless\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInstallation Method\u003c\/td\u003e\n\u003ctd\u003eWeld-on\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFitment Type\u003c\/td\u003e\n\u003ctd\u003eUniversal\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eUPC\u003c\/td\u003e\n\u003ctd\u003eAvailable on packaging\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch4\u003eWhat's Included\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e1x Ticon Industries TIC903-03271-1000 SS304 5-inch teardrop exhaust tip\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch4\u003eAbout Ticon Industries\u003c\/h4\u003e\n\u003cp\u003eTicon Industries is a US-based manufacturer specializing in titanium and stainless steel exhaust components, fabrication hardware, and precision-cut tubing for the performance aftermarket. Their Sequence Manufacturing line produces stainless steel tips, flanges, and exhaust hardware to consistent dimensional specs, making them a preferred source for custom fabricators and exhaust shops requiring reliable, quality components. Ticon products are used across motorsport, track day builds, and high-performance street applications.\u003c\/p\u003e\n\n\u003ch4\u003eFrequently Asked Questions\u003c\/h4\u003e\n\u003cstrong\u003eWhat inlet size does the TIC903-03271-1000 exhaust tip require?\u003c\/strong\u003e\n\u003cp\u003eThe TIC903-03271-1000 is a weld-on tip. The inlet diameter should be confirmed against your exhaust pipe outer diameter before ordering. Contact Ticon Industries or your dealer to confirm the specific inlet dimension for this part number before welding.\u003c\/p\u003e\n\n\u003cstrong\u003eIs the TIC903-03271-1000 a weld-on or clamp-on tip?\u003c\/strong\u003e\n\u003cp\u003eThe TIC903-03271-1000 is a weld-on application. It is intended for permanent installation by welding onto the end of the exhaust pipe. No clamps, U-bolts, or additional hardware are included or required. Proper fitment should be confirmed before welding.\u003c\/p\u003e\n\n\u003cstrong\u003eWhat is the difference between SS304 and SS409 stainless steel for exhaust tips?\u003c\/strong\u003e\n\u003cp\u003eSS304 contains a higher chromium and nickel content than SS409, giving it superior corrosion resistance, a brighter finish, and better resistance to the bluing and discoloration that occurs when exhaust tips are exposed to sustained heat. SS409 is more commonly used in mufflers and mid-pipes where cost matters more than appearance. For visible exterior tips, SS304 is the preferred choice.\u003c\/p\u003e\n\n\u003cstrong\u003eWill the TIC903-03271-1000 fit my aftermarket exhaust system?\u003c\/strong\u003e\n\u003cp\u003eThe TIC903-03271-1000 is a universal weld-on tip. Fitment depends on matching the tip's inlet to your exhaust pipe outer diameter and confirming adequate clearance for the 5-inch teardrop profile within your vehicle's bumper cutout or rear fascia opening. Measure your pipe OD and bumper opening before ordering.\u003c\/p\u003e\n\n\u003cstrong\u003eWill the polished SS304 finish stay shiny over time?\u003c\/strong\u003e\n\u003cp\u003eSS304 holds its polished appearance significantly better than lower-grade stainless alloys under normal use. Some light discoloration near the inlet from exhaust gas heat is normal on all stainless tips over time. Regular cleaning with a stainless-safe polish maintains the appearance. Avoid abrasive cleaners that can scratch the polished surface.\u003c\/p\u003e\n\n\u003cstrong\u003eCan this tip be used on a diesel exhaust?\u003c\/strong\u003e\n\u003cp\u003eYes. SS304 stainless steel is suitable for diesel exhaust applications. The tip will be exposed to soot and carbon particulates in diesel exhaust, which can accumulate on the interior surfaces. This is normal and does not affect the structural integrity or exterior finish of the tip.\u003c\/p\u003e\n\n\u003cstrong\u003eIs welding stainless steel exhaust tips difficult?\u003c\/strong\u003e\n\u003cp\u003eTIG welding is the preferred method for stainless steel exhaust tips as it produces clean, precise welds that maintain the stainless finish in the weld zone. Back-purging with argon gas during welding prevents oxidation on the inner weld bead. MIG welding is possible but requires stainless wire and may produce more heat discoloration at the weld joint. A professional exhaust shop or fabricator can handle this installation.\u003c\/p\u003e\n\n\u003cstrong\u003eDoes Ticon Industries offer other sizes in the teardrop style?\u003c\/strong\u003e\n\u003cp\u003eTicon Industries and the Sequence Manufacturing line offer exhaust tips in multiple outlet sizes and profiles. Contact your dealer or visit ticonindustries.com to review available teardrop and other profile options if the 5-inch size does not match your application.\u003c\/p\u003e\n\n\u003ch4\u003eInstallation Overview\u003c\/h4\u003e\n\u003col\u003e\n\u003cli\u003eConfirm the tip inlet diameter matches your exhaust pipe outer diameter before beginning\u003c\/li\u003e\n\u003cli\u003eClean and degrease the end of the exhaust pipe where the tip will be welded\u003c\/li\u003e\n\u003cli\u003eSlide the tip over the pipe end and adjust the angle and position to your desired orientation\u003c\/li\u003e\n\u003cli\u003eTack weld in at least two opposite positions to hold the tip in place before final welding\u003c\/li\u003e\n\u003cli\u003eComplete the weld using TIG with stainless filler rod, back-purging with argon to protect the inner bead from oxidation\u003c\/li\u003e\n\u003cli\u003eAllow to cool fully before inspecting the weld for full penetration and uniform bead\u003c\/li\u003e\n\u003cli\u003ePolish the weld area if desired using a fine stainless polishing compound to blend the finish\u003c\/li\u003e\n\u003c\/ol\u003e","brand":"Ticon","offers":[{"title":"Default Title","offer_id":46023115898959,"sku":"TIC903-03271-1000","price":129.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1062\/7920\/files\/Ticon_Industries_SS304_5in_Teardrop_Exhaust_Tip.jpg?v=1783452188","url":"https:\/\/www.blackopsautoworks.com\/products\/ticon-industries-tic903-03271-1000-ss304-5in-teardrop-exhaust-tip","provider":"Black Ops Auto Works","version":"1.0","type":"link"}