{"product_id":"timbren-rear-ses-kit-1994-2002-dodge-ram-3500-2wd","title":"Timbren Rear SES Kit for 1994-2002 Dodge Ram 3500 2WD","description":"\u003ch4\u003eLoad Support Without Air Lines or Daily Adjustments\u003c\/h4\u003e\n\u003cp\u003eTimbren DR3500B is a rear Suspension Enhancement System for the 1994-2002 Dodge Ram 3500 2WD. The pair of Aeon hollow rubber springs engages progressively as load increases, helping control rear sag, body roll, and instability while leaving the factory suspension to provide the unloaded ride.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eDR3500B provides up to 6,000 pounds of load-leveling capacity as a pair\u003c\/li\u003e\n\u003cli\u003eProgressive-rate Aeon hollow rubber springs become firmer as the load increases\u003c\/li\u003e\n\u003cli\u003eBolt-on rear installation uses vehicle-specific brackets with no drilling or air lines\u003c\/li\u003e\n\u003cli\u003eMaintenance-free design has no compressors, fittings, or pressure checks\u003c\/li\u003e\n\u003cli\u003eHelps reduce suspension sag, sway, and harsh bottoming while towing or hauling\u003c\/li\u003e\n\u003cli\u003eBacked by Timbren's limited lifetime warranty for the original vehicle installation\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eFitment\u003c\/h4\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eYears\u003c\/th\u003e\n\u003cth\u003eMake\u003c\/th\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003cth\u003eDrivetrain\u003c\/th\u003e\n\u003cth\u003ePosition\u003c\/th\u003e\n\u003cth\u003eNotes\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\u003ctr\u003e\n\u003ctd\u003e1994-2002\u003c\/td\u003e\n\u003ctd\u003eDodge\u003c\/td\u003e\n\u003ctd\u003eRam 3500\u003c\/td\u003e\n\u003ctd\u003e2WD\u003c\/td\u003e\n\u003ctd\u003eRear\u003c\/td\u003e\n\u003ctd\u003ePickup application; verify frame and suspension configuration before installation\u003c\/td\u003e\n\u003c\/tr\u003e\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch4\u003eSpecifications\u003c\/h4\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eDetail\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eManufacturer part number\u003c\/td\u003e\n\u003ctd\u003eDR3500B\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eUPC\u003c\/td\u003e\n\u003ctd\u003e809933000336\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProduct type\u003c\/td\u003e\n\u003ctd\u003eRear suspension enhancement system\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSpring type\u003c\/td\u003e\n\u003ctd\u003eAeon hollow rubber\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRated kit capacity\u003c\/td\u003e\n\u003ctd\u003e6,000 lb\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eUnloaded clearance\u003c\/td\u003e\n\u003ctd\u003eApproximately 1\/2 to 1-1\/2 in between spring and contact point\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInstallation\u003c\/td\u003e\n\u003ctd\u003eBolt-on, no drilling or air lines\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCountry of origin\u003c\/td\u003e\n\u003ctd\u003eCanada\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch4\u003eWhat's Included\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eTwo Aeon hollow rubber springs for DR3500B\u003c\/li\u003e\n\u003cli\u003eTwo Dodge rear kit weldments\u003c\/li\u003e\n\u003cli\u003eTwo application-specific weldments\u003c\/li\u003e\n\u003cli\u003eTwo 4-inch saddle clamps\u003c\/li\u003e\n\u003cli\u003eRequired nuts, bolts, and washers\u003c\/li\u003e\n\u003cli\u003eInstallation instructions\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eAbout Timbren\u003c\/h4\u003e\n\u003cp\u003eTimbren has produced rubber spring suspension systems since 1968. Its Aeon spring technology is used in vehicle-specific SES kits that provide progressive load support without the plumbing and maintenance required by air springs.\u003c\/p\u003e\n\u003ch4\u003eRelated Parts\u003c\/h4\u003e\n\u003cul\u003e\u003cli\u003eNo exact compatible ACTIVE companion product was verified for this rear SES kit.\u003c\/li\u003e\u003c\/ul\u003e\n\u003ch4\u003eFAQ\u003c\/h4\u003e\n\u003cstrong\u003eWhat is the DR3500B?\u003c\/strong\u003e\n\u003cp\u003eIt is a vehicle-specific rear suspension enhancement kit for the listed Dodge Ram 3500 2WD application.\u003c\/p\u003e\n\u003cstrong\u003eDoes the kit increase the truck's GVWR?\u003c\/strong\u003e\n\u003cp\u003eNo. The 6,000-pound kit rating describes spring capacity and does not increase the vehicle manufacturer's GVWR or axle ratings.\u003c\/p\u003e\n\u003cstrong\u003eDoes installation require drilling?\u003c\/strong\u003e\n\u003cp\u003eNo. The manufacturer installation sheet specifies a bolt-on bracket and clamp arrangement.\u003c\/p\u003e\n\u003cstrong\u003eDo the springs touch the axle when unloaded?\u003c\/strong\u003e\n\u003cp\u003eTimbren specifies approximately one-half to one-and-one-half inches of unloaded clearance for rear pickup applications, although accessories or partial load can reduce the gap.\u003c\/p\u003e\n\u003cstrong\u003eDoes the system require air pressure?\u003c\/strong\u003e\n\u003cp\u003eNo. Aeon rubber springs work without air lines, fittings, compressors, or pressure adjustments.\u003c\/p\u003e\n\u003cstrong\u003eWill this fit a four-wheel-drive truck?\u003c\/strong\u003e\n\u003cp\u003eNo. The verified application is for a two-wheel-drive Dodge Ram 3500. Use the correct manufacturer kit for other drivetrains.\u003c\/p\u003e\n\u003cstrong\u003eWhat warranty applies?\u003c\/strong\u003e\n\u003cp\u003eTimbren warrants SES kits against defects in material and workmanship for the life of the vehicle on which the original purchaser installed the kit, subject to its current terms.\u003c\/p\u003e\n\u003cstrong\u003eWhat should be checked after installation?\u003c\/strong\u003e\n\u003cp\u003eVerify unloaded spring clearance, brake-line and tire clearance, and all fastener torque after the first drive and during routine service.\u003c\/p\u003e\n\u003ch4\u003eInstallation Instructions\u003c\/h4\u003e\n\u003col\u003e\n\u003cli\u003eConfirm the 1994-2002 Dodge Ram 3500 2WD application and DR3500B package label.\u003c\/li\u003e\n\u003cli\u003ePark on level ground, secure the vehicle, and support the rear frame using approved lifting procedures.\u003c\/li\u003e\n\u003cli\u003eRemove the original bump-stop components identified in the Timbren instructions.\u003c\/li\u003e\n\u003cli\u003eAssemble the supplied rubber springs, weldments, clamps, bolts, washers, and locknuts in the illustrated orientation.\u003c\/li\u003e\n\u003cli\u003eInstall both assemblies symmetrically and tighten all hardware to the manufacturer's specifications.\u003c\/li\u003e\n\u003cli\u003eLower the truck, verify the required unloaded gap and surrounding clearance, then recheck hardware after initial use.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003e\u003cstrong\u003eCalifornia Proposition 65 Warning:\u003c\/strong\u003e This product can expose you to chemicals known to the State of California to cause cancer and reproductive harm.\u003c\/p\u003e","brand":"Timbren","offers":[{"title":"Default Title","offer_id":67843133014095,"sku":"TIMDR3500B","price":398.07,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1062\/7920\/files\/0c115221bc6bd4f23493391bd92ca834L.jpg?v=1792703419","url":"https:\/\/www.blackopsautoworks.com\/products\/timbren-rear-ses-kit-1994-2002-dodge-ram-3500-2wd","provider":"Black Ops Auto Works","version":"1.0","type":"link"}