{"product_id":"turbosmart-turbo-adapter-compressor-outlet-2-50in-to-90-elbow-vibrant-2-50in","title":"Turbosmart TURTS-199-3019 Turbo Adapter 2.5in 90 Elbow Vibrant","description":"\u003cp\u003eTS-199-3019 is a Turbosmart LockSleeve 90 degree turbo compressor outlet adapter machined from billet aluminum for a 2.50 inch outlet on both ends. Designed exclusively for Turbosmart B Frame and C Frame turbocharger compressor covers, this adapter uses the Vibrant HD Clamp connection type (sold separately) to deliver a weld-free, boost-rated seal rated to 150 PSI. As a Race Only component, it is intended for closed-course competition use and is not legal for use on pollution-controlled vehicles in California or elsewhere where emissions regulations apply.\u003c\/p\u003e\n\u003ch4\u003eLockSleeve Technology\u003c\/h4\u003e\n\u003cp\u003eThe LockSleeve system replaces conventional welded compressor outlet adapters with a precision-machined screw-together ferrule assembly. Two billet aluminum collar halves thread together around the compressor outlet, compressing an internal O-ring against the outlet flange to form a mechanically interlocked, pressure-rated seal.\u003c\/p\u003e\n\u003cp\u003eBecause the connection is fully mechanical, no heat is introduced to the turbocharger housing during installation. There is no risk of warping the compressor cover, no specialist welding equipment required, and the assembly can be disassembled and reinstalled without damaging the seal. The internal O-ring is captive within the ferrule halves, keeping it correctly positioned as the collar is tightened.\u003c\/p\u003e\n\u003cp\u003eThe result is a boost-rated seal that meets or exceeds the performance of a welded adapter, at a fraction of the installation time, while remaining fully serviceable in the field.\u003c\/p\u003e\n\u003ch4\u003eCompatibility\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatible turbos:\u003c\/strong\u003e Turbosmart B Frame and C Frame turbocharger compressor covers only\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNOT compatible\u003c\/strong\u003e with Precision Turbo, Garrett, or Borg Warner turbochargers\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOutlet size:\u003c\/strong\u003e 2.50 inch on both ends\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eElbow angle:\u003c\/strong\u003e 90 degrees\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConnection type:\u003c\/strong\u003e Vibrant HD Clamp -- sold separately, not included\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eVerify your turbocharger model and frame designation before ordering. Fitment on non-Turbosmart housings is not supported and voids the warranty.\u003c\/p\u003e\n\u003ch4\u003eWhat's Included\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e1x LockSleeve ferrule assembly (two precision-machined billet aluminum collar halves with internal O-ring pre-installed)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e The Vibrant HD Clamp is \u003cstrong\u003enot included\u003c\/strong\u003e and must be purchased separately. No additional hardware is required beyond the clamp.\u003c\/p\u003e\n\u003ch4\u003eFull Specifications\u003c\/h4\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eDetail\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003ePart Number\u003c\/td\u003e\n\u003ctd\u003eTS-199-3019\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eUPC\u003c\/td\u003e\n\u003ctd\u003e9329677035254\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOutlet Diameter\u003c\/td\u003e\n\u003ctd\u003e2.50 in (both ends)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eElbow Angle\u003c\/td\u003e\n\u003ctd\u003e90 Degree\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConnection Type\u003c\/td\u003e\n\u003ctd\u003eVibrant HD Clamp (sold separately)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaterial\u003c\/td\u003e\n\u003ctd\u003eBillet aluminum, precision-machined\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSeal Type\u003c\/td\u003e\n\u003ctd\u003eInternal O-ring, mechanically interlocked ferrule\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMax Pressure\u003c\/td\u003e\n\u003ctd\u003e150 PSI\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCompatible Turbos\u003c\/td\u003e\n\u003ctd\u003eTurbosmart B Frame and C Frame compressor covers only\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimensions (approx)\u003c\/td\u003e\n\u003ctd\u003e7 x 5 x 3 in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e0.9 lbs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCountry of Origin\u003c\/td\u003e\n\u003ctd\u003eAustralia\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWarranty\u003c\/td\u003e\n\u003ctd\u003e1-Year Limited (defects in material and workmanship; authorized dealers only; correct installation required)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCARB \/ Emissions\u003c\/td\u003e\n\u003ctd\u003eNo CARB EO number. Race Only. Not legal for use on pollution-controlled vehicles.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch4\u003eLockSleeve Series Variants\u003c\/h4\u003e\n\u003cp\u003eThe Turbosmart LockSleeve 2.50 inch 90 degree adapter is available in multiple connection configurations to suit different clamp and charge pipe systems. Choose the variant that matches your preferred clamp style:\u003c\/p\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003ePart Number\u003c\/th\u003e\n\u003cth\u003eAngle\u003c\/th\u003e\n\u003cth\u003eOutlet Size\u003c\/th\u003e\n\u003cth\u003eConnection Type\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eTS-199-3019\u003c\/td\u003e\n\u003ctd\u003e90 Degree\u003c\/td\u003e\n\u003ctd\u003e2.50 in\u003c\/td\u003e\n\u003ctd\u003eVibrant HD Clamp\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTS-199-3020\u003c\/td\u003e\n\u003ctd\u003e90 Degree\u003c\/td\u003e\n\u003ctd\u003e2.50 in\u003c\/td\u003e\n\u003ctd\u003ePlazmaclamp \/ Plazmaman Clamp\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTS-199-3023\u003c\/td\u003e\n\u003ctd\u003e90 Degree\u003c\/td\u003e\n\u003ctd\u003e2.50 in\u003c\/td\u003e\n\u003ctd\u003eHose Barb\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTS-199-3029\u003c\/td\u003e\n\u003ctd\u003eStraight\u003c\/td\u003e\n\u003ctd\u003e2.50 in\u003c\/td\u003e\n\u003ctd\u003eVibrant HD Clamp\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTS-199-3037\u003c\/td\u003e\n\u003ctd\u003e90 Degree\u003c\/td\u003e\n\u003ctd\u003e3.0 in\u003c\/td\u003e\n\u003ctd\u003eVibrant HD Clamp\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003eAll variants are compatible with Turbosmart B Frame and C Frame compressor covers only. Clamps are sold separately for all variants.\u003c\/p\u003e\n\u003ch4\u003eRace Only and Emissions Notice\u003c\/h4\u003e\n\u003cp\u003eThis product is a Race Only component. It has no CARB Executive Order (EO) number and is not legal for use on pollution-controlled vehicles operated on public roads in California or any other jurisdiction that enforces similar emissions regulations.\u003c\/p\u003e\n\u003cp\u003eThis product is intended exclusively for closed-course competition use sanctioned by a recognized racing organization. It is the buyer's responsibility to ensure compliance with all applicable federal, state, and local laws before purchasing, installing, or operating this product.\u003c\/p\u003e\n\u003cp\u003eDo not install this product on any vehicle that is driven on public roads or that is subject to emissions inspection.\u003c\/p\u003e\n\u003ch4\u003eProposition 65 Warning\u003c\/h4\u003e\n\u003cp\u003e\u003cstrong\u003eWARNING:\u003c\/strong\u003e This product can expose you to chemicals including lead and lead compounds, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov.\u003c\/p\u003e\n\u003ch4\u003eFrequently Asked Questions\u003c\/h4\u003e\n\u003cp\u003e\u003cstrong\u003eWhat turbos are compatible with TS-199-3019?\u003c\/strong\u003e\u003cbr\u003eThis adapter is compatible with Turbosmart B Frame and C Frame turbocharger compressor covers only. It is not compatible with Precision Turbo, Garrett, or Borg Warner turbochargers. Always confirm your turbo frame designation before ordering.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDoes the Turbosmart LockSleeve require welding?\u003c\/strong\u003e\u003cbr\u003eNo. The LockSleeve system is entirely weld-free. The two precision-machined billet aluminum collar halves thread together around the compressor outlet, and the internal O-ring creates the boost-rated seal mechanically. No heat, no welder, and no specialist fabrication skills are required.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs the Vibrant HD Clamp included?\u003c\/strong\u003e\u003cbr\u003eNo. The Vibrant HD Clamp is sold separately and is not included with this adapter. Only the LockSleeve ferrule assembly (two collar halves with internal O-ring) is included in the box.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat is the maximum boost pressure this adapter can handle?\u003c\/strong\u003e\u003cbr\u003eThe LockSleeve ferrule assembly is rated to a maximum of 150 PSI. This exceeds the boost levels of virtually all street and competition applications.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan I use this adapter on a Garrett or Precision Turbo?\u003c\/strong\u003e\u003cbr\u003eNo. This product is engineered specifically for Turbosmart B Frame and C Frame compressor cover geometries. It will not fit or seal correctly on Garrett, Precision Turbo, or Borg Warner housings.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs this product legal for street use in California?\u003c\/strong\u003e\u003cbr\u003eNo. This is a Race Only product with no CARB EO number. It is not legal for use on pollution-controlled vehicles on public roads in California or in other jurisdictions with similar emissions regulations. It is intended for closed-course competition use only.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat is the outlet size on both ends of this adapter?\u003c\/strong\u003e\u003cbr\u003eBoth the inlet and outlet ends measure 2.50 inches. The 90 degree elbow maintains the same 2.50 inch diameter throughout.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan the LockSleeve be removed and reinstalled without replacing the O-ring?\u003c\/strong\u003e\u003cbr\u003eYes. Because the ferrule halves thread together mechanically and the O-ring is captive within the assembly, the adapter can be disassembled and reinstalled without damaging the seal under normal service conditions. Inspect the O-ring for wear or damage any time the assembly is disassembled.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhere is the Turbosmart LockSleeve made?\u003c\/strong\u003e\u003cbr\u003eThe LockSleeve is precision-machined from billet aluminum in Australia.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat warranty does this product carry?\u003c\/strong\u003e\u003cbr\u003eTurbosmart provides a 1-Year Limited Warranty covering defects in materials and workmanship under regular use and correct installation. The warranty applies to purchases from authorized dealers only and runs from the original date of purchase.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhen was the LockSleeve series introduced?\u003c\/strong\u003e\u003cbr\u003eThe Turbosmart LockSleeve series was introduced at SEMA 2025.\u003c\/p\u003e","brand":"Turbosmart","offers":[{"title":"Default Title","offer_id":45940863729743,"sku":"TURTS-199-3019","price":172.79,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1062\/7920\/files\/turbosmart-ts-199-3019-turbo-compressor-outlet-adapter.png?v=1782142165","url":"https:\/\/www.blackopsautoworks.com\/products\/turbosmart-turbo-adapter-compressor-outlet-2-50in-to-90-elbow-vibrant-2-50in","provider":"Black Ops Auto Works","version":"1.0","type":"link"}