{"product_id":"turbosmart-turbo-adapter-compressor-outlet-2-50in-to-straight-plazmaclamp-2-50in","title":"Turbosmart TS-199-3030 Turbo Adapter 2.5in Straight Plazmaclamp","description":"\u003cp\u003eTS-199-3030 is a straight (0-degree) 2.50-inch turbo compressor outlet adapter from the Turbosmart LockSleeve series, engineered specifically for Turbosmart B Frame and C Frame turbocharger compressor covers. Using the Plazmaclamp (Plazmaman clamp) connection type and rated to 150 PSI, this billet aluminum ferrule assembly delivers a weld-free, boost-rated seal through a precision-machined screw-together collar system. Intended for closed-course competition use only. This is a Race Only product and is not legal for use on pollution-controlled vehicles in California.\u003c\/p\u003e\n\u003ch4\u003eLockSleeve Technology: How the Ferrule System Works\u003c\/h4\u003e\n\u003cp\u003eThe Turbosmart LockSleeve system replaces traditional welded or clamped silicone couplers with a precision-machined billet aluminum ferrule assembly. Two collar halves thread together around the compressor outlet and the intercooler or charge pipe, compressing an internal O-ring to form a mechanically interlocked, boost-rated seal. The result is a connection that resists blow-off under sustained boost pressure up to 150 PSI without any welding, heat, or permanent modification to the compressor cover.\u003c\/p\u003e\n\u003cp\u003eBecause the ferrule threads together under mechanical load rather than relying on clamp friction alone, the LockSleeve design maintains sealing integrity even under repeated thermal cycling and high-vibration racing environments. The billet aluminum construction keeps weight low while providing the rigidity needed to hold a consistent O-ring preload across the full pressure range.\u003c\/p\u003e\n\u003ch4\u003eCompatibility\u003c\/h4\u003e\n\u003cp\u003eThis adapter is designed to fit \u003cstrong\u003eTurbosmart B Frame and C Frame turbocharger compressor covers only\u003c\/strong\u003e with a 2.50-inch compressor outlet. It is \u003cstrong\u003enot compatible\u003c\/strong\u003e with Garrett, Precision Turbo, or Borg Warner turbochargers.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eCompatible: Turbosmart B Frame turbocharger (2.50-inch compressor outlet)\u003c\/li\u003e\n\u003cli\u003eCompatible: Turbosmart C Frame turbocharger (2.50-inch compressor outlet)\u003c\/li\u003e\n\u003cli\u003eNot compatible: Garrett turbochargers\u003c\/li\u003e\n\u003cli\u003eNot compatible: Precision Turbo turbochargers\u003c\/li\u003e\n\u003cli\u003eNot compatible: Borg Warner turbochargers\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eClamp sold separately.\u003c\/strong\u003e A Plazmaclamp (Plazmaman clamp) is required to complete the installation and is not included with this product.\u003c\/p\u003e\n\u003ch4\u003eWhat's Included\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e1x LockSleeve ferrule assembly (two precision-machined billet aluminum collar halves with internal O-ring)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003ePlazmaclamp \/ Plazmaman clamp is \u003cstrong\u003enot included\u003c\/strong\u003e and must be purchased separately.\u003c\/p\u003e\n\u003ch4\u003eFull Specifications\u003c\/h4\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eDetail\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003ePart Number\u003c\/td\u003e\n\u003ctd\u003eTS-199-3030\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eUPC\u003c\/td\u003e\n\u003ctd\u003e9329677035360\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOutlet Diameter\u003c\/td\u003e\n\u003ctd\u003e2.50 inches (both ends)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eElbow Angle\u003c\/td\u003e\n\u003ctd\u003eStraight (0 degrees)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConnection Type\u003c\/td\u003e\n\u003ctd\u003ePlazmaclamp \/ Plazmaman Clamp (sold separately)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaterial\u003c\/td\u003e\n\u003ctd\u003eBillet aluminum, precision-machined\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSeal Type\u003c\/td\u003e\n\u003ctd\u003eInternal O-ring, mechanically interlocked ferrule\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMax Pressure\u003c\/td\u003e\n\u003ctd\u003e150 PSI\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCompatible Turbos\u003c\/td\u003e\n\u003ctd\u003eTurbosmart B Frame, Turbosmart C Frame (2.50-inch compressor outlet)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003eApprox. 1.0 lb\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCountry of Origin\u003c\/td\u003e\n\u003ctd\u003eAustralia\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWarranty\u003c\/td\u003e\n\u003ctd\u003e1-Year Limited (defects in material and workmanship; authorized dealers only; correct installation required)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCARB \/ Emissions\u003c\/td\u003e\n\u003ctd\u003eNo CARB EO number. Race Only. Not legal for use on California pollution-controlled vehicles.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch4\u003eLockSleeve Series: Sibling Variants\u003c\/h4\u003e\n\u003cp\u003eThe Turbosmart LockSleeve lineup covers multiple outlet diameters and angles to match different compressor cover configurations. This straight 2.50-inch variant sits at the lower end of the price range. Other sizes and angles in the series include:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e2.50-inch, 90-degree elbow\u003c\/strong\u003e versions for installations where the charge pipe exits at a right angle to the compressor cover\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e3.00-inch variants\u003c\/strong\u003e (such as the 90-degree TS-199-3037) for Turbosmart B Frame and C Frame turbos with a 3.00-inch compressor outlet\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThe straight 2.50-inch configuration (this SKU) is priced lower than the 90-degree elbow variants. If your compressor outlet is 3.00 inches, see the 3.00-inch LockSleeve models. If your charge pipe routing requires a 90-degree turn directly off the turbo, see the 90-degree 2.50-inch variant. All LockSleeve models share the same core ferrule technology and 150 PSI pressure rating.\u003c\/p\u003e\n\u003ch4\u003eRace Only Use and CARB \/ California Notice\u003c\/h4\u003e\n\u003cp\u003eThis product has no CARB Executive Order (EO) number and is intended exclusively for closed-course competition use sanctioned by a recognized racing organization. It is \u003cstrong\u003enot legal for use on pollution-controlled vehicles operated on public roads in California\u003c\/strong\u003e or in any jurisdiction that enforces California emissions regulations. Installation on a street-driven vehicle may violate federal and state emissions laws. The purchaser and installer assume full responsibility for compliance with all applicable regulations.\u003c\/p\u003e\n\u003ch4\u003eProp 65 Warning\u003c\/h4\u003e\n\u003cp\u003e\u003cstrong\u003eWARNING:\u003c\/strong\u003e This product can expose you to chemicals including lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to \u003cem\u003ewww.P65Warnings.ca.gov\u003c\/em\u003e.\u003c\/p\u003e\n\u003ch4\u003eFrequently Asked Questions\u003c\/h4\u003e\n\u003cp\u003e\u003cstrong\u003eWhat turbos is TS-199-3030 compatible with?\u003c\/strong\u003e\u003cbr\u003eThis adapter fits Turbosmart B Frame and C Frame turbochargers with a 2.50-inch compressor outlet. It is not compatible with Garrett, Precision Turbo, or Borg Warner turbochargers.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDoes the Turbosmart LockSleeve 2.50-inch straight adapter work without welding?\u003c\/strong\u003e\u003cbr\u003eYes. The LockSleeve system uses a screw-together billet aluminum ferrule with an internal O-ring to create a boost-rated, mechanically interlocked seal. No welding is required.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat clamp does the 2.50-inch LockSleeve straight adapter use?\u003c\/strong\u003e\u003cbr\u003eThis model uses a Plazmaclamp (also called a Plazmaman clamp). The clamp is sold separately and is not included in the box.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow much boost pressure can the Turbosmart LockSleeve handle?\u003c\/strong\u003e\u003cbr\u003eThe LockSleeve series is rated to a maximum of 150 PSI.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan I use the LockSleeve 2.50-inch straight adapter on the street?\u003c\/strong\u003e\u003cbr\u003eNo. This is a Race Only product with no CARB EO number. It is intended for closed-course competition use only and is not legal for use on pollution-controlled vehicles operated on public roads, including in California.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat is the difference between the straight and 90-degree LockSleeve 2.50-inch versions?\u003c\/strong\u003e\u003cbr\u003eThe straight (0-degree) version connects the compressor outlet to a charge pipe running in a straight line. The 90-degree elbow version routes the charge pipe at a right angle directly off the turbo. The straight variant is priced lower than the 90-degree versions.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat is the difference between the 2.50-inch and 3.00-inch LockSleeve models?\u003c\/strong\u003e\u003cbr\u003eThe 2.50-inch models fit Turbosmart B Frame and C Frame turbos with a 2.50-inch compressor outlet. The 3.00-inch models, such as the TS-199-3037 90-degree elbow, fit the same turbo families but with a 3.00-inch compressor outlet. Always match the adapter outlet size to your compressor cover outlet diameter.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs the LockSleeve 2.50-inch straight adapter made from cast or billet aluminum?\u003c\/strong\u003e\u003cbr\u003eBillet aluminum only. Both collar halves of the ferrule assembly are precision-machined from billet aluminum, not cast. This ensures tight dimensional tolerances for consistent O-ring sealing.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhere is the Turbosmart LockSleeve made?\u003c\/strong\u003e\u003cbr\u003eThe Turbosmart LockSleeve series, including this 2.50-inch straight adapter, is made in Australia.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat warranty does the Turbosmart LockSleeve carry?\u003c\/strong\u003e\u003cbr\u003eTurbosmart provides a 1-Year Limited Warranty covering defects in material and workmanship under regular use and correct installation, purchased through an authorized dealer.\u003c\/p\u003e","brand":"Turbosmart","offers":[{"title":"Default Title","offer_id":45940866383951,"sku":"TURTS-199-3030","price":151.19,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1062\/7920\/files\/turbosmart-ts-199-3030-2-5in-turbo-compressor-outlet-adapter.png?v=1782155168","url":"https:\/\/www.blackopsautoworks.com\/products\/turbosmart-turbo-adapter-compressor-outlet-2-50in-to-straight-plazmaclamp-2-50in","provider":"Black Ops Auto Works","version":"1.0","type":"link"}