{"product_id":"turbosmart-turbo-adapter-compressor-outlet-3-00in-to-90-elbow-hose-barb-3-00in","title":"Turbosmart Turbo Adapter Compressor Outlet 3.00in to 90 Elbow Hose Barb 3.00in","description":"\u003cp\u003eThe Turbosmart TS-199-3040 LockSleeve Turbo Adapter provides a professional, weld-free solution for adapting a 3.00 inch turbo compressor outlet to a 90-degree hose barb connection. This adapter is especially useful in tight engine bays where charge piping must make an immediate turn after the turbo. It is designed to work with standard 3.00 inch hose and offers the strength and reliability needed for high-boost applications.\u003c\/p\u003e\n\u003ch4\u003eUnderstanding the Turbosmart LockSleeve System\u003c\/h4\u003e\n\u003cp\u003eTurbosmart developed the LockSleeve system to give builders a strong, boost-ready connection without the drawbacks of welding. The TS-199-3040 uses a two-piece collar design with internal split rings and an O-ring that creates a high-pressure seal when the collar is properly torqued. This system allows for easier installation and future serviceability compared to permanent welded connections.\u003c\/p\u003e\n\u003ch4\u003eWelded vs LockSleeve Adapters\u003c\/h4\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003eFeature\u003c\/th\u003e\n\u003cth\u003eWelded Connection\u003c\/th\u003e\n\u003cth\u003eTurbosmart LockSleeve (TS-199-3040)\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eInstallation Method\u003c\/td\u003e\n\u003ctd\u003eRequires welding\u003c\/td\u003e\n\u003ctd\u003eWeld-free, clamp-on\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eServiceability\u003c\/td\u003e\n\u003ctd\u003eDifficult to remove\u003c\/td\u003e\n\u003ctd\u003eEasy to remove and reinstall\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRisk to Turbo Housing\u003c\/td\u003e\n\u003ctd\u003eHigher (heat damage possible)\u003c\/td\u003e\n\u003ctd\u003eLower (no welding required)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFlexibility for Modifications\u003c\/td\u003e\n\u003ctd\u003eLimited\u003c\/td\u003e\n\u003ctd\u003eHigh\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBest For\u003c\/td\u003e\n\u003ctd\u003ePermanent high-volume builds\u003c\/td\u003e\n\u003ctd\u003eCustom and frequently modified builds\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch4\u003eKey Technical Specifications\u003c\/h4\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eDetail\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003ePart Number\u003c\/td\u003e\n\u003ctd\u003eTS-199-3040\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eUPC\u003c\/td\u003e\n\u003ctd\u003e9329677035469\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eTurbosmart\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eType\u003c\/td\u003e\n\u003ctd\u003eLockSleeve Turbo Adapter\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCompressor Outlet Size\u003c\/td\u003e\n\u003ctd\u003e3.00 inch\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOutlet Configuration\u003c\/td\u003e\n\u003ctd\u003e90° Elbow Hose Barb\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHose Size Compatibility\u003c\/td\u003e\n\u003ctd\u003e3.00 inch\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDesign\u003c\/td\u003e\n\u003ctd\u003eWeld-Free, Boost-Ready\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSystem\u003c\/td\u003e\n\u003ctd\u003eTurbosmart LockSleeve\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCountry of Origin\u003c\/td\u003e\n\u003ctd\u003eAustralia\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWarranty\u003c\/td\u003e\n\u003ctd\u003eTurbosmart Limited Warranty\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch4\u003eInstallation Guide\u003c\/h4\u003e\n\u003cp\u003eProper installation of the Turbosmart TS-199-3040 is critical for maintaining boost pressure and preventing leaks. Below are the recommended installation steps and torque specifications.\u003c\/p\u003e\n\u003ch4\u003eTools Typically Required:\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e3.00 inch hose clamps\u003c\/li\u003e\n\u003cli\u003eTorque wrench\u003c\/li\u003e\n\u003cli\u003eSocket set\u003c\/li\u003e\n\u003cli\u003eClean rags\u003c\/li\u003e\n\u003cli\u003eSafety gloves\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eStep-by-Step Installation:\u003c\/h4\u003e\n\u003col\u003e\n\u003cli\u003eClean the turbo compressor outlet thoroughly and inspect it for any damage, debris, or old gasket material.\u003c\/li\u003e\n\u003cli\u003eSlide the LockSleeve adapter (TS-199-3040) over the compressor outlet until it is fully and evenly seated.\u003c\/li\u003e\n\u003cli\u003ePosition your 3.00 inch hose onto the 90° elbow barb, ensuring proper alignment.\u003c\/li\u003e\n\u003cli\u003eInstall the hose clamps and tighten them gradually and evenly.\u003c\/li\u003e\n\u003cli\u003eTorque the LockSleeve collar bolts to approximately \u003cstrong\u003e8–12 ft-lbs\u003c\/strong\u003e, tightening in a crisscross pattern for even pressure.\u003c\/li\u003e\n\u003cli\u003eTorque the hose clamps to the clamp manufacturer’s recommended specification (typically \u003cstrong\u003e10–15 ft-lbs\u003c\/strong\u003e for high-performance clamps).\u003c\/li\u003e\n\u003cli\u003eDouble-check alignment, clearance, and support for the charge piping.\u003c\/li\u003e\n\u003cli\u003ePerform a boost leak test after installation if possible.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch4\u003eCommon Installation Mistakes to Avoid\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eNot fully seating the adapter on the compressor outlet before tightening\u003c\/li\u003e\n\u003cli\u003eOver-tightening the collar bolts or hose clamps\u003c\/li\u003e\n\u003cli\u003ePoor hose alignment causing stress on the connection\u003c\/li\u003e\n\u003cli\u003eUsing the wrong size or type of hose clamps\u003c\/li\u003e\n\u003cli\u003eFailing to properly support the charge piping\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eFrequently Asked Questions\u003c\/h4\u003e\n\u003cp\u003e\u003cstrong\u003eWhat is the Turbosmart TS-199-3040 used for?\u003c\/strong\u003e\u003cbr\u003eIt adapts a 3.00 inch turbo compressor outlet to a 90-degree hose barb connection without requiring welding.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDo I need to weld anything when using this adapter?\u003c\/strong\u003e\u003cbr\u003eNo. The TS-199-3040 is part of Turbosmart’s weld-free LockSleeve system.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhen should I use the 90-degree version instead of the straight version?\u003c\/strong\u003e\u003cbr\u003eUse the 90-degree version when your charge piping needs to make an immediate turn due to space constraints.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat torque should I use on the LockSleeve collar?\u003c\/strong\u003e\u003cbr\u003eThe collar bolts should be torqued to approximately 8–12 ft-lbs in a crisscross pattern for even pressure.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat torque should I use on the hose clamps?\u003c\/strong\u003e\u003cbr\u003eFollow the clamp manufacturer’s recommendations, typically 10–15 ft-lbs for high-performance clamps.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs this adapter suitable for high boost applications?\u003c\/strong\u003e\u003cbr\u003eYes. The Turbosmart LockSleeve system is designed to handle high boost levels when properly installed.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan this adapter be removed later if needed?\u003c\/strong\u003e\u003cbr\u003eYes. One of the main benefits of the LockSleeve system is easier removal compared to welded connections.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs professional installation recommended?\u003c\/strong\u003e\u003cbr\u003eYes. Proper alignment and correct torque are important for maintaining boost pressure and preventing leaks.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDoes the TS-199-3040 come with hose clamps?\u003c\/strong\u003e\u003cbr\u003eNo. You will need appropriate 3.00 inch hose clamps for the barb side.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat are common mistakes when installing this adapter?\u003c\/strong\u003e\u003cbr\u003eCommon mistakes include not fully seating the adapter, over-tightening clamps, poor hose alignment, and using the wrong clamp size.\u003c\/p\u003e","brand":"Turbosmart","offers":[{"title":"Default Title","offer_id":45940869333071,"sku":"TURTS-199-3040","price":168.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1062\/7920\/files\/turbosmart-ts-199-3040-3in-turbo-compressor-adapter.png?v=1781905892","url":"https:\/\/www.blackopsautoworks.com\/products\/turbosmart-turbo-adapter-compressor-outlet-3-00in-to-90-elbow-hose-barb-3-00in","provider":"Black Ops Auto Works","version":"1.0","type":"link"}