{"product_id":"walbro-450-lph-walf90000274-e85","title":"Fuel Injector Connection Walbro 450 LPH E85","description":"\u003ch4\u003eBuild the fuel system around the correct flow and connection\u003c\/h4\u003e\u003cp\u003eFuel Injector Connection WALF90000274 supports the stated flow, fuel, electrical, and physical configuration. Walbro 450 LPH High Pressure Relief Valve In-Tank E85 High Pressure Fuel Pump (F90000274)\u003c\/p\u003e\u003ch4\u003eFeatures\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eOutperforms all current market in-tank fuel pumps\u003c\/li\u003e\n\u003cli\u003eDesigned for engines with more than 500HP\u003c\/li\u003e\n\u003cli\u003eAward-winning OE Technology\u003c\/li\u003e\n\u003cli\u003eThe conservative horsepower rating of this pump is that this pump can support 800 HP on 12 volts and\u003c\/li\u003e\n\u003cli\u003eup to 950 HP on 13.5 volts.......\u003c\/li\u003e\n\u003cli\u003eIMPORTANT**\u003c\/li\u003e\n\u003cli\u003eYou cannot wire an aftermarket pump directly to the factory trigger wires. The factory wires will only allow a 12 amp draw pump which most OEM pumps are. A high performance pump draws\u003c\/li\u003e\n\u003cli\u003e13.6\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eFitment \u0026amp; Requirements\u003c\/h4\u003e\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eScope\u003c\/th\u003e\n\u003cth\u003eRequirement\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\u003ctr\u003e\n\u003ctd\u003eComponent-specific application\u003c\/td\u003e\n\u003ctd\u003eComponent-specific application. Match the exact fuel injector, manufacturer part number, dimensions, connector, and fuel-system requirements before ordering.\u003c\/td\u003e\n\u003c\/tr\u003e\u003c\/tbody\u003e\n\u003c\/table\u003e\u003ch4\u003ePart Numbers \u0026amp; Options\u003c\/h4\u003e\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eOption\u003c\/th\u003e\n\u003cth\u003eManufacturer Part Number\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\u003ctr\u003e\n\u003ctd\u003eDefault\u003c\/td\u003e\n\u003ctd\u003eWALF90000274\u003c\/td\u003e\n\u003c\/tr\u003e\u003c\/tbody\u003e\n\u003c\/table\u003e\u003ch4\u003eSpecifications\u003c\/h4\u003e\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eDetail\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eProduct Type\u003c\/td\u003e\n\u003ctd\u003eFuel Injector\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFuel Compatibility\u003c\/td\u003e\n\u003ctd\u003eWalbro 450 LPH High Pressure Relief Valve In-Tank E85 High Pressure Fuel Pump (F90000274)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFlow Rating\u003c\/td\u003e\n\u003ctd\u003eHigh- Pressure,High-flow performance\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFuel Compatibility 2\u003c\/td\u003e\n\u003ctd\u003eOEM technology designed and developed for E85. All pumping components have been validated to\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFuel Compatibility 3\u003c\/td\u003e\n\u003ctd\u003eOEM Specifications for approved use in E85\/Flex fuel applications.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePackage Detail\u003c\/td\u003e\n\u003ctd\u003eamps. Therefore, you need to install a fuel pump relay at least 30 amps with a 10 gauge feed directly from the battery (fused of course) and use the factory power for the original fuel pump to trigger the relay.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003ch4\u003eWhat's Included\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eThe exact selected product or set shown in the Part Numbers \u0026amp; Options table\u003c\/li\u003e\n\u003cli\u003eamps. Therefore, you need to install a fuel pump relay at least 30 amps with a 10 gauge feed directly from the battery (fused of course) and use the factory power for the original fuel pump to trigger the relay.\u003c\/li\u003e\n\u003cli\u003eUnlisted injectors, rails, wiring, fittings, tuning, tools, and installation hardware are not included\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eAbout Fuel Injector Connection\u003c\/h4\u003e\u003cp\u003eFuel Injector Connection supplies flow-matched fuel injectors, connection components, service parts, and supporting fuel-system hardware. Correct selection depends on the exact flow, electrical, dimensional, spray-pattern, quantity, and engine requirements rather than a similar-looking injector alone.\u003c\/p\u003e\u003ch4\u003eRelated Parts\u003c\/h4\u003e\u003cul\u003e\u003cli\u003eNo external product is linked. Verify any injector adapters, rails, seals, pumps, or tuning components against an ACTIVE Black Ops Auto Works listing for the exact application before purchase.\u003c\/li\u003e\u003c\/ul\u003e\u003ch4\u003eFAQ\u003c\/h4\u003e\u003cstrong\u003eWhat is the WALF90000274?\u003c\/strong\u003e\u003cp\u003eIt is the exact fuel injector and configuration described in the fitment and specification sections above.\u003c\/p\u003e\u003cstrong\u003eIs this selected by vehicle model alone?\u003c\/strong\u003e\u003cp\u003eNo. Confirm every stated engine, connector, rail, length, flow, and package requirement that applies to this exact item.\u003c\/p\u003e\u003cstrong\u003eIs tuning required?\u003c\/strong\u003e\u003cp\u003eFuel-system and injector changes can require calibration. Use qualified tuning guidance for the exact engine, fuel, injector data, and operating pressure.\u003c\/p\u003e\u003cstrong\u003eDoes the listing include every surrounding fuel-system part?\u003c\/strong\u003e\u003cp\u003eNo. Only the components stated in the What's Included section are included.\u003c\/p\u003e\u003cstrong\u003eCan a related part number be substituted?\u003c\/strong\u003e\u003cp\u003eNo. A different flow rate, length, connector, spray pattern, quantity, or adapter package is a different configuration.\u003c\/p\u003e\u003cstrong\u003eWhich fuel can be used?\u003c\/strong\u003e\u003cp\u003eUse only the fuels explicitly listed in the specifications and current manufacturer data for this exact configuration.\u003c\/p\u003e\u003cstrong\u003eWhat should be checked before installation?\u003c\/strong\u003e\u003cp\u003eVerify the part label, seals, connector, rail fit, quantity, fuel compatibility, and calibration requirements before opening the fuel system.\u003c\/p\u003e\u003cstrong\u003eWho should install fuel-system components?\u003c\/strong\u003e\u003cp\u003eA qualified technician should depressurize the system, follow the vehicle service procedure, prevent contamination, and leak-check the completed installation.\u003c\/p\u003e\u003ch4\u003eInstallation Instructions\u003c\/h4\u003e\u003col\u003e\n\u003cli\u003eConfirm the Fuel Injector Connection part label and every fitment, connector, dimension, flow, quantity, and fuel requirement before installation.\u003c\/li\u003e\n\u003cli\u003eReview the vehicle, engine, or component service procedure and disconnect electrical power where required.\u003c\/li\u003e\n\u003cli\u003eRelieve fuel-system pressure safely and work in a ventilated area away from sparks, flame, and hot surfaces.\u003c\/li\u003e\n\u003cli\u003eKeep all ports and components clean, replace only the seals specified for the exact application, and do not force mismatched connectors or fittings.\u003c\/li\u003e\n\u003cli\u003eInstall the component in the documented orientation and tighten fasteners or fittings to the applicable current specification.\u003c\/li\u003e\n\u003cli\u003eRestore pressure, inspect every disturbed connection for leaks, confirm normal operation, and complete any required calibration before road use.\u003c\/li\u003e\n\u003c\/ol\u003e","brand":"Fuel Injector Connection","offers":[{"title":"Default Title","offer_id":68232846803023,"sku":"WALF90000274","price":130.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1062\/7920\/files\/fuel-injector-connection-walf90000274-fuel-injector-01.webp?v=1795029278","url":"https:\/\/www.blackopsautoworks.com\/products\/walbro-450-lph-walf90000274-e85","provider":"Black Ops Auto Works","version":"1.0","type":"link"}