{"product_id":"wheel-mate-muteki-31886c-open-end-chrome-lug-nuts-m12x1-50","title":"Wheel Mate Muteki Open End Lug Nuts - Chrome 12x1.50","description":"\u003ch4\u003eCold-Forged Chrome Lug Nuts Built for Tuner Wheels and Performance Installs\u003c\/h4\u003e\n\u003cp\u003eThe Wheel Mate Muteki 31886C open end lug nuts bring racing-inspired engineering to your wheel swap or upgrade. Cold-forged from 1008 steel, each nut is smaller and lighter than a standard lug nut while maintaining the strength needed for street and track use. The open-ended design accommodates longer aftermarket studs for full thread engagement, and the 60-degree taper seat provides a firm, secure lock against the wheel hub. A spline drive socket design adds a layer of theft resistance since these cannot be removed with a standard lug wrench. The 31886C is an ideal choice for tuner-style wheels with small lug holes and vehicles with 12x1.50 studs.\u003c\/p\u003e\n\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eCold-forged 1008 steel construction for high strength at reduced weight\u003c\/li\u003e\n\u003cli\u003eOpen-ended design accommodates extended racing studs and ensures full thread engagement\u003c\/li\u003e\n\u003cli\u003eOversized 60-degree taper seat for secure wheel-to-hub contact\u003c\/li\u003e\n\u003cli\u003eSpline drive socket head adds theft deterrence\u003c\/li\u003e\n\u003cli\u003eCompact 20mm x 21mm head fits tuner wheels with small lug holes\u003c\/li\u003e\n\u003cli\u003eLightweight at 25 grams per nut versus the typical 60 grams\u003c\/li\u003e\n\u003cli\u003eThread pitch M12x1.50 compatible with Honda, Acura, Toyota, Lexus, Mazda, and Mitsubishi\u003c\/li\u003e\n\u003cli\u003eChrome finish for a clean, polished appearance on any wheel\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch4\u003eSpecifications\u003c\/h4\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003eDetail\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003ePart Number (MPN)\u003c\/td\u003e\n\u003ctd\u003e31886C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eThread Pitch\u003c\/td\u003e\n\u003ctd\u003eM12 x 1.50\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSeat Type\u003c\/td\u003e\n\u003ctd\u003e60-Degree Taper (Conical)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDrive Type\u003c\/td\u003e\n\u003ctd\u003eSpline Drive (Key Included)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eNut Style\u003c\/td\u003e\n\u003ctd\u003eOpen End\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHead Diameter\u003c\/td\u003e\n\u003ctd\u003e20mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHeight\u003c\/td\u003e\n\u003ctd\u003e21mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight Per Nut\u003c\/td\u003e\n\u003ctd\u003e25 grams\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaterial\u003c\/td\u003e\n\u003ctd\u003eCold-Forged 1008 Steel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFinish\u003c\/td\u003e\n\u003ctd\u003eChrome\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eQuantity\u003c\/td\u003e\n\u003ctd\u003e20 Lug Nuts + 1 Spline Socket Key\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch4\u003eWhat's Included\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e20 x Muteki 31886C open end lug nuts in chrome finish\u003c\/li\u003e\n\u003cli\u003e1 x Spline socket key adapter for installation and removal\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch4\u003eFrequently Asked Questions\u003c\/h4\u003e\n\n\u003cstrong\u003eWhat thread pitch are the Wheel Mate Muteki 31886C lug nuts?\u003c\/strong\u003e\n\u003cp\u003eThe 31886C uses an M12 x 1.50 thread pitch. This is a common fitment for Japanese domestic market and Japanese-spec vehicles including Honda, Acura, Toyota, Lexus, Mazda, and Mitsubishi models. Always confirm the stud thread pitch on your vehicle before purchasing.\u003c\/p\u003e\n\n\u003cstrong\u003eWhat seat type do the Muteki 31886C lug nuts use?\u003c\/strong\u003e\n\u003cp\u003eThe 31886C uses a 60-degree conical taper seat. This is one of the most common aftermarket lug nut seat types and is designed to work with aftermarket wheels that have a tapered lug seat. Using the wrong seat type can prevent proper seating and create a dangerous condition. Always match the seat type to your specific wheel before installing.\u003c\/p\u003e\n\n\u003cstrong\u003eWhy do I need the spline key that comes with the 31886C?\u003c\/strong\u003e\n\u003cp\u003eThe Muteki 31886C uses a spline drive head that cannot be turned with a standard hex socket or lug wrench. The included spline key adapter is required for installation and removal. Keep this key in your vehicle at all times so you can remove the wheels if needed on the road or at a shop.\u003c\/p\u003e\n\n\u003cstrong\u003eCan I use the Muteki 31886C on wheels with small lug holes?\u003c\/strong\u003e\n\u003cp\u003eYes. One of the primary advantages of the 31886C design is the compact 20mm outer head diameter, which is significantly narrower than standard lug nuts. This makes it compatible with most tuner-style aftermarket wheels that use small counterbore lug holes where a standard socket or lug nut head would not fit.\u003c\/p\u003e\n\n\u003cstrong\u003eAre the Muteki 31886C lug nuts safe for daily street driving?\u003c\/strong\u003e\n\u003cp\u003eYes. The 31886C is cold-forged 1008 steel and designed for both street and performance use. The 60-degree taper seat provides solid clamping force against the wheel hub when torqued correctly. Always torque to the vehicle manufacturer's recommended specification for M12 studs (typically 75 to 85 ft-lbs as a general guideline) and re-torque after the first 50 to 100 miles following any wheel installation.\u003c\/p\u003e\n\n\u003cstrong\u003eWhat vehicles are compatible with M12 x 1.50 lug nuts?\u003c\/strong\u003e\n\u003cp\u003eM12 x 1.50 is the standard stud thread pitch for many Honda, Acura, Toyota, Lexus, Mazda, and Mitsubishi vehicles. Common applications include the Honda Civic, Honda Accord, Toyota Corolla, Toyota Camry, Mazda3, and Mitsubishi Lancer. Always verify the thread pitch and seat type specific to your vehicle and aftermarket wheel before ordering.\u003c\/p\u003e\n\n\u003cstrong\u003eAre the Muteki 31886C lug nuts open-ended for extended studs?\u003c\/strong\u003e\n\u003cp\u003eYes. The open-ended design means the nut does not have a closed cap on the top. This allows the stud to protrude through the nut completely, which is important when using extended aftermarket wheel studs or hubcentric rings that alter the effective stud length. It also ensures full thread engagement on studs of varying lengths.\u003c\/p\u003e\n\n\u003cstrong\u003eDo I need any special tools to install or remove the Muteki 31886C?\u003c\/strong\u003e\n\u003cp\u003eYou need the included spline socket key adapter and a standard torque wrench or impact wrench. The spline key fits into a 1\/2-inch drive or 3\/8-inch drive socket. Most professional shops can also accommodate the spline key when you bring it in. Do not attempt to install or remove with a standard hex socket as this will damage the nut head.\u003c\/p\u003e\n\n\u003ch4\u003eInstallation Instructions\u003c\/h4\u003e\n\u003col\u003e\n\u003cli\u003eConfirm the thread pitch on your vehicle's wheel studs matches M12 x 1.50 before installation.\u003c\/li\u003e\n\u003cli\u003eVerify that your aftermarket wheel uses a 60-degree conical taper lug seat compatible with the 31886C.\u003c\/li\u003e\n\u003cli\u003eClean the wheel stud threads and the lug nut threads to remove any debris, rust, or old thread compound.\u003c\/li\u003e\n\u003cli\u003eDo not apply anti-seize or thread locking compound to the studs unless specifically required by your wheel manufacturer.\u003c\/li\u003e\n\u003cli\u003eThread each lug nut onto the stud by hand until fully seated against the wheel using the included spline socket key.\u003c\/li\u003e\n\u003cli\u003eUsing a torque wrench with the spline socket key adapter, torque each lug nut in a star pattern to the vehicle manufacturer's specification for M12 studs.\u003c\/li\u003e\n\u003cli\u003eAfter driving 50 to 100 miles, re-torque all lug nuts to confirm they have not loosened.\u003c\/li\u003e\n\u003cli\u003eStore the spline socket key in your vehicle in case roadside removal is needed.\u003c\/li\u003e\n\u003c\/ol\u003e\n\n\u003cp\u003e\u003cstrong\u003eWARNING:\u003c\/strong\u003e This product can expose you to chemicals including lead and phthalates, which are known to the State of California to cause cancer and reproductive harm. For more information go to www.P65Warnings.ca.gov.\u003c\/p\u003e","brand":"Wheel Mate","offers":[{"title":"Default Title","offer_id":46008142790735,"sku":"WHM31886C","price":59.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1062\/7920\/files\/wheel-mate-muteki-open-end-lug-nuts-chrome-12x1_50-wheel-mate.png?v=1783178164","url":"https:\/\/www.blackopsautoworks.com\/products\/wheel-mate-muteki-31886c-open-end-chrome-lug-nuts-m12x1-50","provider":"Black Ops Auto Works","version":"1.0","type":"link"}