{"product_id":"whiteline-16-24-chevy-camaro-ss-lt1-front-sway-bar-30mm-hd-blade-adjustable-incl-bushings","title":"Whiteline 30mm Front Sway Bar for 2016-2024 Camaro SS and 2020-2024 LT1","description":"\u003ch4\u003eTune front roll resistance without changing spring rate\u003c\/h4\u003e\u003cp\u003eWhiteline BCF81Z is a 30 mm front sway bar for the verified sixth-generation Camaro SS and LT1 applications. Three adjustment positions let the installer change effective front roll resistance while the supplied bushings, saddles, lateral locks, and washers support a complete bar installation with the factory end links.\u003c\/p\u003e\u003ch4\u003eKey Features\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eBCF81Z uses a 30 mm bar with three adjustment positions\u003c\/li\u003e\n\u003cli\u003eFront-axle fitment for the supported Camaro SS and LT1 trims\u003c\/li\u003e\n\u003cli\u003eEffective settings published as 29 mm, 30 mm, and 31 mm\u003c\/li\u003e\n\u003cli\u003eCompatible with the factory end links\u003c\/li\u003e\n\u003cli\u003eProtective powder-coated finish over solid spring-steel construction\u003c\/li\u003e\n\u003cli\u003eWheel alignment is not required by the manufacturer after installation\u003c\/li\u003e\n\u003cli\u003ePublished installation time is approximately 1.5 hours\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eFitment\u003c\/h4\u003e\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eYears\u003c\/th\u003e\n\u003cth\u003eMake\u003c\/th\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003cth\u003eVerified Trim\u003c\/th\u003e\n\u003cth\u003ePosition\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e2016-2024\u003c\/td\u003e\n\u003ctd\u003eChevrolet\u003c\/td\u003e\n\u003ctd\u003eCamaro\u003c\/td\u003e\n\u003ctd\u003eSS\u003c\/td\u003e\n\u003ctd\u003eFront\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2020-2024\u003c\/td\u003e\n\u003ctd\u003eChevrolet\u003c\/td\u003e\n\u003ctd\u003eCamaro\u003c\/td\u003e\n\u003ctd\u003eLT1\u003c\/td\u003e\n\u003ctd\u003eFront\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003ch4\u003eSpecifications\u003c\/h4\u003e\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eDetail\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eManufacturer Part Number\u003c\/td\u003e\n\u003ctd\u003eBCF81Z\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProduct Type\u003c\/td\u003e\n\u003ctd\u003eFront adjustable sway bar kit\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eNominal Bar Diameter\u003c\/td\u003e\n\u003ctd\u003e30 mm \/ 1.181 in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAdjustment\u003c\/td\u003e\n\u003ctd\u003eThree position\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eEffective Settings\u003c\/td\u003e\n\u003ctd\u003e29 mm soft, 30 mm medium, 31 mm hard\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaterial\u003c\/td\u003e\n\u003ctd\u003eSolid spring steel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFinish\u003c\/td\u003e\n\u003ctd\u003eProtective powder coat\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFitting Position\u003c\/td\u003e\n\u003ctd\u003eFront\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePublished Installation Time\u003c\/td\u003e\n\u003ctd\u003e1.5 hours\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWheel Alignment Required\u003c\/td\u003e\n\u003ctd\u003eNo\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eEAN\u003c\/td\u003e\n\u003ctd\u003e9319924460328\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eManufacturer Warranty\u003c\/td\u003e\n\u003ctd\u003eLimited lifetime; current Whiteline terms apply\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003ch4\u003eWhat's Included\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eOne Whiteline BCF81Z front sway bar\u003c\/li\u003e\n\u003cli\u003eTwo sway-bar bushings\u003c\/li\u003e\n\u003cli\u003eTwo saddles\u003c\/li\u003e\n\u003cli\u003eTwo lateral locks\u003c\/li\u003e\n\u003cli\u003eFour washers\u003c\/li\u003e\n\u003cli\u003eEnd links and unrelated suspension hardware are not included\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eAbout Whiteline\u003c\/h4\u003e\u003cp\u003eWhiteline develops suspension and chassis-control components around measured geometry, bushing control, and adjustable roll resistance. Its sway bars are application-specific, so the exact axle position, trim, adjustment procedure, and installation hardware must be confirmed before fitting.\u003c\/p\u003e\u003ch4\u003eRelated Parts\u003c\/h4\u003e\u003cul\u003e\u003cli\u003eNo internal end-link or rear-bar product is linked because companion suspension parts must be verified for the exact Camaro trim, axle position, ride height, and complete chassis setup.\u003c\/li\u003e\u003c\/ul\u003e\u003ch4\u003eFAQ\u003c\/h4\u003e\u003cstrong\u003eWhat is the BCF81Z?\u003c\/strong\u003e\u003cp\u003eIt is a 30 mm three-position adjustable front sway bar kit for the supported sixth-generation Camaro SS and LT1 applications.\u003c\/p\u003e\u003cstrong\u003eDoes it fit every sixth-generation Camaro?\u003c\/strong\u003e\u003cp\u003eNo. Verified fitment is limited to 2016-2024 SS and 2020-2024 LT1 models.\u003c\/p\u003e\u003cstrong\u003eWhere is the bar installed?\u003c\/strong\u003e\u003cp\u003eIt installs at the front axle and is not a rear sway bar.\u003c\/p\u003e\u003cstrong\u003eHow many adjustment positions are available?\u003c\/strong\u003e\u003cp\u003eThe bar has three positions with published effective settings of 29 mm, 30 mm, and 31 mm.\u003c\/p\u003e\u003cstrong\u003eAre bushings and saddles included?\u003c\/strong\u003e\u003cp\u003eYes. The kit includes two bushings, two saddles, two lateral locks, and four washers.\u003c\/p\u003e\u003cstrong\u003eAre replacement end links included?\u003c\/strong\u003e\u003cp\u003eNo. The verified kit is compatible with the factory end links, but replacement links are not listed as included.\u003c\/p\u003e\u003cstrong\u003eIs an alignment required after installation?\u003c\/strong\u003e\u003cp\u003eWhiteline lists wheel alignment as not required for this bar installation, though the complete suspension should still be inspected.\u003c\/p\u003e\u003cstrong\u003eHow should the adjustment holes be selected?\u003c\/strong\u003e\u003cp\u003eStart from the setting recommended for the complete vehicle setup and always use matching positions on both sides; an outer position is softer and an inner position is firmer.\u003c\/p\u003e\u003ch4\u003eInstallation Instructions\u003c\/h4\u003e\u003col\u003e\n\u003cli\u003eConfirm the supported Camaro year and trim, front position, and BCF81Z part number before disassembly.\u003c\/li\u003e\n\u003cli\u003eRaise and support the vehicle safely, unload the front suspension as directed by the current service procedure, and inspect the factory end links and mounting points.\u003c\/li\u003e\n\u003cli\u003eRemove the original front bar while retaining only the hardware identified for reuse by the current installation instructions.\u003c\/li\u003e\n\u003cli\u003eLubricate and install the supplied bushings, saddles, lateral locks, and washers in their documented positions.\u003c\/li\u003e\n\u003cli\u003ePosition the replacement bar without forcing it against steering, brake, exhaust, body, or suspension components.\u003c\/li\u003e\n\u003cli\u003eAttach both end links at matching adjustment holes and tighten all fasteners to the current Whiteline and Chevrolet specifications at the required suspension position.\u003c\/li\u003e\n\u003cli\u003eCycle the steering and suspension through available travel, verify clearance, road-test cautiously, and recheck every fastener and bushing after the initial service interval.\u003c\/li\u003e\n\u003c\/ol\u003e\u003cp\u003e\u003cstrong\u003eCalifornia Proposition 65 Warning:\u003c\/strong\u003e WARNING: Cancer and Reproductive Harm. For more information, visit www.P65Warnings.ca.gov.\u003c\/p\u003e","brand":"Whiteline","offers":[{"title":"Default Title","offer_id":68137368485967,"sku":"WHLBCF81Z","price":298.88,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1062\/7920\/files\/whiteline-bcf81z-30mm-front-sway-bar-kit-01.webp?v=1794530025","url":"https:\/\/www.blackopsautoworks.com\/products\/whiteline-16-24-chevy-camaro-ss-lt1-front-sway-bar-30mm-hd-blade-adjustable-incl-bushings","provider":"Black Ops Auto Works","version":"1.0","type":"link"}