{"product_id":"whiteline-kca347-rear-camber-kit-nissan-240sx-300zx","title":"Whiteline 89-98 Nissan 240SX S13 \u0026 S14 \/ 90-96 Nissan 300zx Z32 Rear Camber adj kit - upper c\/arm","description":"\u003ch4\u003eCorrect Negative Camber Before It Eats Your Rear Tires\u003c\/h4\u003e\n\u003cp\u003eLowering an S-chassis or Z32 pushes rear camber further negative than the factory upper control arm bushing can handle, chewing up the inside edge of your rear tires. This Whiteline KCA347 camber adjusting kit replaces the rigid factory upper control arm bushing with an eccentric adjustable design, giving you the range to bring rear camber back into a usable window.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eAdds significant additional rear camber adjustment range at the upper control arm\u003c\/li\u003e\n\u003cli\u003eCorrects excessive negative camber caused by lowering springs or coilovers\u003c\/li\u003e\n\u003cli\u003eExtends rear tire life by keeping contact patch more even across the tread\u003c\/li\u003e\n\u003cli\u003eDurable polyurethane bushing resists the wear that leads to factory bushing failure\u003c\/li\u003e\n\u003cli\u003eDirect replacement using the factory upper control arm mounting location\u003c\/li\u003e\n\u003cli\u003eKCA347 shares the same rear upper control arm design across the S13, S14, and Z32 platforms\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eFitment\u003c\/h4\u003e\n\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eYear Range\u003c\/th\u003e\n\u003cth\u003eMake\u003c\/th\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003cth\u003eTrim\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e1989-1994\u003c\/td\u003e\n\u003ctd\u003eNissan\u003c\/td\u003e\n\u003ctd\u003e240SX\u003c\/td\u003e\n\u003ctd\u003eSE\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e1995-1998\u003c\/td\u003e\n\u003ctd\u003eNissan\u003c\/td\u003e\n\u003ctd\u003e240SX\u003c\/td\u003e\n\u003ctd\u003eSE\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e1990-1996\u003c\/td\u003e\n\u003ctd\u003eNissan\u003c\/td\u003e\n\u003ctd\u003e300ZX\u003c\/td\u003e\n\u003ctd\u003eTurbo\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch4\u003eSpecifications\u003c\/h4\u003e\n\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eDetail\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eManufacturer\u003c\/td\u003e\n\u003ctd\u003eWhiteline\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMPN\u003c\/td\u003e\n\u003ctd\u003eKCA347\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eUPC\u003c\/td\u003e\n\u003ctd\u003eKCA347\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePosition\u003c\/td\u003e\n\u003ctd\u003eRear\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eApplication\u003c\/td\u003e\n\u003ctd\u003eUpper Control Arm Bushing Kit\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaterial\u003c\/td\u003e\n\u003ctd\u003ePolyurethane\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAdjustment Type\u003c\/td\u003e\n\u003ctd\u003eEccentric Camber Correction\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch4\u003eWhat's Included\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eRear upper control arm adjustable bushing kit\u003c\/li\u003e\n\u003cli\u003eRequired hardware for installation\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eAbout Whiteline\u003c\/h4\u003e\n\u003cp\u003eWhiteline designs and manufactures suspension components engineered to sharpen handling while preserving daily drivability. Their caster and camber correction kits, control arms, and bushing sets use proprietary synthetic elastomers and precision engineered geometry to correct factory suspension compliance and unlock more consistent, predictable handling.\u003c\/p\u003e\n\u003ch4\u003eFAQ\u003c\/h4\u003e\n\u003cstrong\u003eWhat is the KCA347?\u003c\/strong\u003e\u003cp\u003eThe KCA347 is a Whiteline rear camber adjusting kit that replaces the factory upper control arm bushing on the Nissan 240SX and 300ZX, adding the range needed to correct excessive negative camber.\u003c\/p\u003e\n\u003cstrong\u003eWhy does my rear camber need correcting after lowering my car?\u003c\/strong\u003e\u003cp\u003eLowering the ride height changes suspension geometry and pushes rear camber further negative than the factory bushing allows, which this kit is designed to correct.\u003c\/p\u003e\n\u003cstrong\u003eWill this kit help my rear tires wear more evenly?\u003c\/strong\u003e\u003cp\u003eYes, correcting excessive negative camber back toward a proper alignment spec reduces uneven inside edge wear on the rear tires.\u003c\/p\u003e\n\u003cstrong\u003eDo I need an alignment after installing this kit?\u003c\/strong\u003e\u003cp\u003eYes, since this kit is specifically designed to change camber angle, a full alignment is required after installation to set your desired specification.\u003c\/p\u003e\n\u003cstrong\u003eDoes this kit replace the entire control arm?\u003c\/strong\u003e\u003cp\u003eNo, this kit replaces the bushing within your factory upper control arm rather than the arm itself.\u003c\/p\u003e\n\u003cstrong\u003eCan I install this kit in my home garage?\u003c\/strong\u003e\u003cp\u003eYes, most installers with basic hand tools and jack stands can complete this swap, though a proper alignment afterward requires shop equipment.\u003c\/p\u003e\n\u003cstrong\u003eWill this kit work with coilovers or a lowering spring setup?\u003c\/strong\u003e\u003cp\u003eYes, this kit is commonly installed alongside lowering springs or coilovers specifically to correct the camber shift that comes with a lower ride height.\u003c\/p\u003e\n\u003cstrong\u003eIs this kit front or rear specific?\u003c\/strong\u003e\u003cp\u003eThis kit is for the rear upper control arm only and does not include any front suspension components.\u003c\/p\u003e\n\u003ch4\u003eInstall Instructions\u003c\/h4\u003e\n\u003col\u003e\n\u003cli\u003eRaise and safely support the rear of the vehicle on jack stands\u003c\/li\u003e\n\u003cli\u003eRemove the rear upper control arm from its chassis and knuckle mounting points\u003c\/li\u003e\n\u003cli\u003ePress out the factory bushing from the control arm\u003c\/li\u003e\n\u003cli\u003eInstall the new Whiteline eccentric adjustable bushing into the control arm\u003c\/li\u003e\n\u003cli\u003eReinstall the control arm and torque all fasteners to factory specification\u003c\/li\u003e\n\u003cli\u003eLower the vehicle and have a professional alignment performed to set camber\u003c\/li\u003e\n\u003c\/ol\u003e","brand":"Whiteline","offers":[{"title":"Default Title","offer_id":46249995337807,"sku":"WHLKCA347","price":74.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1062\/7920\/files\/whlkca347-2_932fad0c-84ab-4ac7-8c5d-dc62381eca24.webp?v=1785249636","url":"https:\/\/www.blackopsautoworks.com\/products\/whiteline-kca347-rear-camber-kit-nissan-240sx-300zx","provider":"Black Ops Auto Works","version":"1.0","type":"link"}