{"product_id":"whiteline-w63342-rear-camber-correction-charger-challenger","title":"Whiteline Plus 3\/08+ Dodge Challenger \/ 11\/05+ Charger Rear Camber Correction Control\/Radius Arm Upp","description":"\u003ch4\u003eStop Chasing Rear Camber After a Lowering Job\u003c\/h4\u003e\n\u003cp\u003eLowered Chargers and Challengers almost always end up with excess negative camber in the rear, which chews through the inside edge of a rear tire in a matter of months. The Whiteline W63342 upper control arm bushing kit replaces the soft factory rubber with a double offset polyurethane bushing design that dials in up to 0.5 degrees of camber correction per side, restoring proper tire contact patch and even wear without touching the factory control arm.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eDouble offset design corrects up to 0.5 degrees of negative camber per side\u003c\/li\u003e\n\u003cli\u003eHigh density polyurethane resists the deflection and premature wear common with rubber OE bushings\u003c\/li\u003e\n\u003cli\u003eDirect replacement for the factory upper rear control arm bushings, no cutting or welding required\u003c\/li\u003e\n\u003cli\u003eReduces bushing wind up under hard cornering and braking for more consistent rear alignment\u003c\/li\u003e\n\u003cli\u003eIncludes all shells and tubes needed for a complete pair of upper rear control arms\u003c\/li\u003e\n\u003cli\u003eBacked by Whiteline W63342 part number for easy reordering and warranty tracking\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eFitment\u003c\/h4\u003e\n\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eYear Range\u003c\/th\u003e\n\u003cth\u003eMake\u003c\/th\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2006-2023\u003c\/td\u003e\n\u003ctd\u003eDodge\u003c\/td\u003e\n\u003ctd\u003eCharger\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2008-2023\u003c\/td\u003e\n\u003ctd\u003eDodge\u003c\/td\u003e\n\u003ctd\u003eChallenger\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch4\u003eSpecifications\u003c\/h4\u003e\n\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eDetail\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eManufacturer Part Number\u003c\/td\u003e\n\u003ctd\u003eW63342\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eWhiteline\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePosition\u003c\/td\u003e\n\u003ctd\u003eRear Upper Control Arm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaterial\u003c\/td\u003e\n\u003ctd\u003ePolyurethane\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCamber Correction\u003c\/td\u003e\n\u003ctd\u003eUp to 0.5 degrees per side\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eUPC\u003c\/td\u003e\n\u003ctd\u003eNot published by manufacturer\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWarranty\u003c\/td\u003e\n\u003ctd\u003eLimited lifetime, defects in materials and workmanship\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch4\u003eWhat's Included\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e4 polyurethane shell bushings\u003c\/li\u003e\n\u003cli\u003e4 steel tubes\u003c\/li\u003e\n\u003cli\u003eInstallation hardware where applicable\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eAbout Whiteline\u003c\/h4\u003e\n\u003cp\u003eWhiteline has engineered performance suspension bushings and alignment correction parts in Australia for more than three decades. Their polyurethane compounds are formulated specifically for suspension use, holding their shape and stiffness far longer than rubber while reducing unwanted flex through the chassis.\u003c\/p\u003e\n\u003ch4\u003eRelated Parts on Our Site\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eWhiteline rear sway bar upgrades for Dodge Charger and Challenger\u003c\/li\u003e\n\u003cli\u003eWhiteline front control arm bushing kits for LX\/LD platform vehicles\u003c\/li\u003e\n\u003cli\u003ePerformance alignment and camber kits for lowered muscle cars\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eFAQ\u003c\/h4\u003e\n\u003cstrong\u003eWhat is the W63342?\u003c\/strong\u003e\n\u003cp\u003eThe Whiteline W63342 is a polyurethane upper rear control arm bushing kit with a double offset design that corrects up to 0.5 degrees of camber per side on Dodge Charger and Challenger models.\u003c\/p\u003e\n\u003cstrong\u003eWill this kit fix camber after lowering my Charger or Challenger?\u003c\/strong\u003e\n\u003cp\u003eYes, the double offset design is specifically built to correct the added negative camber that results from lowering springs or coilovers on the LX and LD platform rear suspension.\u003c\/p\u003e\n\u003cstrong\u003eDoes this kit replace the entire control arm?\u003c\/strong\u003e\n\u003cp\u003eNo, it replaces only the bushings and tubes inside the factory upper rear control arm, so you keep the factory arm and save on cost compared to a full aftermarket arm.\u003c\/p\u003e\n\u003cstrong\u003eIs this a direct bolt in replacement?\u003c\/strong\u003e\n\u003cp\u003eYes, the W63342 is designed as a direct fit replacement for the factory rubber bushings with no cutting, welding, or modification needed.\u003c\/p\u003e\n\u003cstrong\u003eWhat material is used for the bushings?\u003c\/strong\u003e\n\u003cp\u003eWhiteline uses a proprietary high density polyurethane compound that resists deflection and holds camber settings far more consistently than the factory rubber bushings.\u003c\/p\u003e\n\u003cstrong\u003eCan I install this kit myself at home?\u003c\/strong\u003e\n\u003cp\u003eMost installers with a floor jack, jack stands, and basic hand tools can complete the install in a home garage, though a press or vise may be needed to remove the old bushings.\u003c\/p\u003e\n\u003cstrong\u003eWill I need an alignment after installing this kit?\u003c\/strong\u003e\n\u003cp\u003eYes, a full alignment is required after installation so the shop can set the rear camber to your target specification using the new adjustment range.\u003c\/p\u003e\n\u003cstrong\u003eDoes this kit fit both two door Challenger and four door Charger models?\u003c\/strong\u003e\n\u003cp\u003eYes, the W63342 fits both the Dodge Charger sedan and Dodge Challenger coupe since both share the same LX\/LD platform rear suspension geometry.\u003c\/p\u003e\n\u003ch4\u003eInstall Instructions\u003c\/h4\u003e\n\u003col\u003e\n\u003cli\u003eRaise and support the rear of the vehicle, then remove the wheels\u003c\/li\u003e\n\u003cli\u003eSupport the rear control arm and remove the mounting bolts securing the upper control arm\u003c\/li\u003e\n\u003cli\u003ePress or drive out the factory rubber bushings from the control arm\u003c\/li\u003e\n\u003cli\u003eClean the control arm bushing bore and install the new Whiteline shells and tubes\u003c\/li\u003e\n\u003cli\u003eReinstall the control arm and torque all fasteners to factory specification\u003c\/li\u003e\n\u003cli\u003eReinstall the wheels, lower the vehicle, and schedule a full alignment\u003c\/li\u003e\n\u003c\/ol\u003e","brand":"Whiteline","offers":[{"title":"Default Title","offer_id":46250015850575,"sku":"WHLW63342","price":141.88,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1062\/7920\/files\/whiteline-w63342-rear-camber-kit-charger-challenger-2.webp?v=1785263290","url":"https:\/\/www.blackopsautoworks.com\/products\/whiteline-w63342-rear-camber-correction-charger-challenger","provider":"Black Ops Auto Works","version":"1.0","type":"link"}