{"product_id":"wilwood-221-17393-rear-flexline-toyota-sequoia","title":"Wilwood 08-20 Toyota Sequoia Flexline Kit - Rear","description":"\u003ch4\u003eFirmer Pedal Feel Starts With The Line, Not Just The Pad\u003c\/h4\u003e\n\u003cp\u003eFactory rubber brake hoses expand under pressure, robbing pedal feel and slowing brake response over time as the rubber ages. The Wilwood 221-17393 rear flexline kit replaces the stock rubber hose on the Toyota Sequoia with a braided stainless steel line that resists expansion, delivering a firmer pedal and more consistent braking performance.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eDirect bolt in replacement for the factory rear rubber brake hose\u003c\/li\u003e\n\u003cli\u003eBraided stainless steel construction resists expansion under hard braking\u003c\/li\u003e\n\u003cli\u003eDOT compliant for street legal use\u003c\/li\u003e\n\u003cli\u003eImproves brake pedal feel and response compared to aging rubber lines\u003c\/li\u003e\n\u003cli\u003eCorrosion resistant PTFE inner liner for long service life\u003c\/li\u003e\n\u003cli\u003eWilwood MPN 221-17393 rear position kit\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eFitment Table\u003c\/h4\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eYear Range\u003c\/th\u003e\n\u003cth\u003eMake\u003c\/th\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e2008-2020\u003c\/td\u003e\n\u003ctd\u003eToyota\u003c\/td\u003e\n\u003ctd\u003eSequoia\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch4\u003eSpecifications\u003c\/h4\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eDetail\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eWilwood\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMPN\u003c\/td\u003e\n\u003ctd\u003e221-17393\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eUPC\u003c\/td\u003e\n\u003ctd\u003eN\/A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePosition\u003c\/td\u003e\n\u003ctd\u003eRear\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConstruction\u003c\/td\u003e\n\u003ctd\u003eBraided Stainless Steel, PTFE Liner\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCompliance\u003c\/td\u003e\n\u003ctd\u003eDOT Approved\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch4\u003eWhat's Included\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eRear brake flexline (quantity per axle configuration)\u003c\/li\u003e\n\u003cli\u003eMounting hardware\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eAbout Wilwood\u003c\/h4\u003e\n\u003cp\u003eWilwood Engineering has designed and manufactured high performance brake systems for street, off road, and racing applications for decades. Their stainless steel flexlines are built to the same standard as their brake kits, giving daily drivers and racers alike a firmer, more consistent pedal.\u003c\/p\u003e\n\u003ch4\u003eRelated Parts on Our Site\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/products\/wilwood-caliper-dynapro-radial-thin-pad-1-75in-pistons-81in-disc\"\u003eWilwood Dynapro Radial Caliper - 1.75in Pistons\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/wilwood-caliper-forged-superlite-1-12in-pistons-81in-disc\"\u003eWilwood Forged Superlite Caliper - 1.12in Pistons\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eFAQ\u003c\/h4\u003e\n\u003cstrong\u003eWhat is the Wilwood 221-17393?\u003c\/strong\u003e\n\u003cp\u003eThe Wilwood 221-17393 is a braided stainless steel rear brake flexline kit designed to replace the factory rubber brake hose on 2008-2020 Toyota Sequoia models.\u003c\/p\u003e\n\u003cstrong\u003eWill this flexline fit my Sequoia?\u003c\/strong\u003e\n\u003cp\u003eThis kit fits all 2008-2020 Toyota Sequoia model years at the rear position. Check your vehicle's model year against the fitment table above to confirm.\u003c\/p\u003e\n\u003cstrong\u003eIs this brake line DOT legal for street use?\u003c\/strong\u003e\n\u003cp\u003eYes, the Wilwood 221-17393 is DOT compliant and legal for street use.\u003c\/p\u003e\n\u003cstrong\u003eWhy upgrade from a rubber brake line to a stainless steel flexline?\u003c\/strong\u003e\n\u003cp\u003eRubber brake hoses expand under hydraulic pressure, especially as they age, which softens pedal feel. A braided stainless steel line with a PTFE liner resists that expansion, giving a firmer and more responsive pedal.\u003c\/p\u003e\n\u003cstrong\u003eDo I need to bleed the brakes after installing this flexline?\u003c\/strong\u003e\n\u003cp\u003eYes, the brake system must be bled after installation to remove any air introduced during the swap.\u003c\/p\u003e\n\u003cstrong\u003eDoes this kit include the front flexline as well?\u003c\/strong\u003e\n\u003cp\u003eNo, this listing is for the rear position only. A separate front flexline kit is required if replacing both ends.\u003c\/p\u003e\n\u003cstrong\u003eWhat material is the outer covering on this brake line?\u003c\/strong\u003e\n\u003cp\u003eThe line uses a braided stainless steel outer covering over a PTFE inner liner for durability and resistance to abrasion.\u003c\/p\u003e\n\u003cstrong\u003eCan this flexline be used with both OEM and aftermarket brake calipers?\u003c\/strong\u003e\n\u003cp\u003eYes, as long as the caliper and hardline fittings match the factory thread and connection type, this flexline is compatible with OEM and most aftermarket setups.\u003c\/p\u003e\n\u003ch4\u003eInstall Instructions\u003c\/h4\u003e\n\u003col\u003e\n\u003cli\u003eRaise and safely support the vehicle, then remove the rear wheel.\u003c\/li\u003e\n\u003cli\u003eDisconnect the factory rubber brake hose at the hardline and caliper connections.\u003c\/li\u003e\n\u003cli\u003eRemove the factory hose and any retaining hardware.\u003c\/li\u003e\n\u003cli\u003eInstall the new Wilwood stainless steel flexline, connecting it to the hardline and caliper.\u003c\/li\u003e\n\u003cli\u003eTorque all fittings to manufacturer specification and secure with any retaining hardware.\u003c\/li\u003e\n\u003cli\u003eBleed the brake system to remove air introduced during installation.\u003c\/li\u003e\n\u003cli\u003eCheck for leaks and verify proper pedal feel before returning the vehicle to service.\u003c\/li\u003e\n\u003c\/ol\u003e\n","brand":"Wilwood","offers":[{"title":"Default Title","offer_id":46274435448911,"sku":"WIL221-17393","price":97.57,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1062\/7920\/files\/wilwood-221-17393-rear-flexline-toyota-sequoia.webp?v=1785332697","url":"https:\/\/www.blackopsautoworks.com\/products\/wilwood-221-17393-rear-flexline-toyota-sequoia","provider":"Black Ops Auto Works","version":"1.0","type":"link"}