{"product_id":"xclutch-08-17-mitsubishi-lancer-es-2-0l-stage-1-sprung-organic-clutch-kit","title":"XClutch Stage 1 Clutch for 2008-2017 Mitsubishi Lancer 2.0L","description":"\u003ch4\u003eImprove Lancer clamp load while retaining an organic street friction disc\u003c\/h4\u003e\u003cp\u003eXClutch XKMI23433-1A is a Stage 1 clutch kit for the supported Mitsubishi Lancer 2.0L manual applications. The sprung organic disc prioritizes street drivability while the pressure plate provides a published 60 percent clamp-load increase and 210 lb-ft torque capacity including factor of safety.\u003c\/p\u003e\u003ch4\u003eKey Features\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eXClutch XKMI23433-1A is matched to the verified application and configuration\u003c\/li\u003e\n\u003cli\u003eStage 1 sprung organic configuration for street use\u003c\/li\u003e\n\u003cli\u003ePublished 60 percent increase in clamping force\u003c\/li\u003e\n\u003cli\u003ePublished 210 lb-ft torque capacity including factor of safety\u003c\/li\u003e\n\u003cli\u003eHydraulic release bearing and clutch slave cylinder included\u003c\/li\u003e\n\u003cli\u003eOrganic friction material for progressive engagement\u003c\/li\u003e\n\u003cli\u003eNo flywheel, pilot bearing or alignment tool is included in this configuration\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eApplication details and restrictions\u003c\/h4\u003e\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eYears\u003c\/th\u003e\n\u003cth\u003eMake\u003c\/th\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003cth\u003eVerified Configuration\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e2008-2013\u003c\/td\u003e\n\u003ctd\u003eMitsubishi\u003c\/td\u003e\n\u003ctd\u003eLancer DE\u003c\/td\u003e\n\u003ctd\u003e2.0L; supported manual transmission\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2008-2017\u003c\/td\u003e\n\u003ctd\u003eMitsubishi\u003c\/td\u003e\n\u003ctd\u003eLancer ES\u003c\/td\u003e\n\u003ctd\u003e2.0L; supported manual transmission\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2011\u003c\/td\u003e\n\u003ctd\u003eMitsubishi\u003c\/td\u003e\n\u003ctd\u003eLancer ES Sportback\u003c\/td\u003e\n\u003ctd\u003e2.0L; supported manual transmission\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2008\u003c\/td\u003e\n\u003ctd\u003eMitsubishi\u003c\/td\u003e\n\u003ctd\u003eLancer GTS\u003c\/td\u003e\n\u003ctd\u003e2.0L; supported manual transmission\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003ch4\u003eSpecifications\u003c\/h4\u003e\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eDetail\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eManufacturer Part Number\u003c\/td\u003e\n\u003ctd\u003eXKMI23433-1A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eStage\u003c\/td\u003e\n\u003ctd\u003eStage 1\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRecommended Use\u003c\/td\u003e\n\u003ctd\u003eStreet use\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePublished Torque Capacity\u003c\/td\u003e\n\u003ctd\u003e210 lb-ft including factor of safety\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eClamping Force Increase\u003c\/td\u003e\n\u003ctd\u003e60 percent\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDisc Diameter\u003c\/td\u003e\n\u003ctd\u003e8 27\/32 in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDisc Material\u003c\/td\u003e\n\u003ctd\u003eOrganic\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDisc Hub\u003c\/td\u003e\n\u003ctd\u003eSprung\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFlywheel Step\u003c\/td\u003e\n\u003ctd\u003e-0.256 in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInput Shaft\u003c\/td\u003e\n\u003ctd\u003e7\/8 in; 20 splines\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eUPC\u003c\/td\u003e\n\u003ctd\u003e9337467336733\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003ch4\u003eWhat's Included\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eOne exact XClutch XKMI23433-1A pressure plate and sprung organic clutch disc\u003c\/li\u003e\n\u003cli\u003eClutch slave cylinder and hydraulic release bearing\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eAbout XClutch\u003c\/h4\u003e\u003cp\u003eXClutch is developed by Australian Clutch Services using in-house testing for street and motorsport applications. Each kit configuration matches a defined friction material, clamp load, torque capacity, input shaft and release arrangement, so those details must be confirmed before installation.\u003c\/p\u003e\u003ch4\u003eRelated Parts\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eInspect the application-correct release bearing, pilot bearing or bushing, clutch fork, pivot components and hydraulic system before installation.\u003c\/li\u003e\n\u003cli\u003eMatch replacement flywheel, fasteners, seals and service parts by their own exact manufacturer applications; no unverified external or internal product link is included.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eFAQ\u003c\/h4\u003e\u003cstrong\u003eWhat is the XKMI23433-1A?\u003c\/strong\u003e\u003cp\u003eIt is an XClutch Stage 1 sprung organic single-disc clutch kit for the listed 2008-2017 Mitsubishi Lancer 2.0L trims with the supported manual transmission.\u003c\/p\u003e\u003cstrong\u003eWhich vehicle configuration must be confirmed?\u003c\/strong\u003e\u003cp\u003eConfirm the listed 2008-2017 Mitsubishi Lancer 2.0L trims with the supported manual transmission, including the stated engine, trim and manual-transmission application.\u003c\/p\u003e\u003cstrong\u003eWhat friction material does this kit use?\u003c\/strong\u003e\u003cp\u003eThe exact friction material and sprung-hub configuration are stated in the Specifications section and must match the intended street or track use.\u003c\/p\u003e\u003cstrong\u003eIs the flywheel included?\u003c\/strong\u003e\u003cp\u003eNo. This configuration does not include a flywheel or flywheel bolts; inspect and service the compatible flywheel according to current specifications.\u003c\/p\u003e\u003cstrong\u003eWhat is not included?\u003c\/strong\u003e\u003cp\u003eA flywheel, flywheel bolts, pilot bearing, pressure-plate bolts and alignment tool are not included according to the exact-product listing.\u003c\/p\u003e\u003cstrong\u003eCan clutch feel or cabin noise change?\u003c\/strong\u003e\u003cp\u003eYes. XClutch states that performance upgrades can change pedal effort, engagement, noise, vibration or harshness, especially when a single-mass flywheel conversion is included.\u003c\/p\u003e\u003cstrong\u003eWhat related parts should be inspected?\u003c\/strong\u003e\u003cp\u003eInspect the release system, clutch fork or hydraulics, transmission input shaft, seals, mounting hardware and flywheel interface before assembly.\u003c\/p\u003e\u003cstrong\u003eIs professional installation recommended?\u003c\/strong\u003e\u003cp\u003eYes. Correct transmission removal, clutch orientation, fastener torque, release-system setup and break-in are important to operation and service life.\u003c\/p\u003e\u003ch4\u003eInstallation Instructions\u003c\/h4\u003e\u003col\u003e\n\u003cli\u003eConfirm XClutch XKMI23433-1A, the application, and every listed restriction before installation.\u003c\/li\u003e\n\u003cli\u003eDisconnect battery power, support the vehicle and transmission safely, and remove the transmission using current Mitsubishi service information.\u003c\/li\u003e\n\u003cli\u003eInspect the hydraulic system, input shaft, seals, flywheel and mounting hardware before assembly.\u003c\/li\u003e\n\u003cli\u003ePrepare the compatible flywheel to current specifications and clean every friction surface with residue-free cleaner.\u003c\/li\u003e\n\u003cli\u003eOrient the sprung organic disc correctly, align it with an application-appropriate tool and fit the pressure plate evenly.\u003c\/li\u003e\n\u003cli\u003eInstall and bleed the supplied slave-cylinder and hydraulic-release assembly using the current XClutch procedure.\u003c\/li\u003e\n\u003cli\u003eTighten all fasteners to current specifications, reinstall the transmission without loading the disc and complete the required break-in before demanding use.\u003c\/li\u003e\n\u003c\/ol\u003e\u003cp\u003e\u003cstrong\u003eCalifornia Proposition 65 Warning:\u003c\/strong\u003e This product can expose you to chemicals including antimony oxide and other chemicals known to the State of California to cause cancer or reproductive harm. For more information, visit www.P65Warnings.ca.gov.\u003c\/p\u003e","brand":"XCLUTCH","offers":[{"title":"Default Title","offer_id":68246376906831,"sku":"XCLXKMI23433-1A","price":656.14,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1062\/7920\/files\/xclutch-xkmi23433_1a-lancer-20l-stage-1-clutch-kit-01.webp?v=1795126366","url":"https:\/\/www.blackopsautoworks.com\/products\/xclutch-08-17-mitsubishi-lancer-es-2-0l-stage-1-sprung-organic-clutch-kit","provider":"Black Ops Auto Works","version":"1.0","type":"link"}