{"product_id":"yukon-gear-master-overhaul-kit-for-10-camaro-w-v8","title":"Yukon Gear Master Overhaul Kit For 10+ Camaro w\/ V8","description":"\u003ch4\u003eComplete IRS Differential Rebuild Kit for 2010-2015 Chevrolet Camaro with V8\u003c\/h4\u003e\n\u003cp\u003eThe \u003cstrong\u003eYK GM8.6IRS\u003c\/strong\u003e from Yukon Gear delivers every component required to rebuild the GM 8.6-inch (218mm) Independent Rear Suspension differential fitted to 2010-2015 Chevrolet Camaro SS, ZL1, and Z\/28 models equipped with the V8 engine. The kit is designed specifically for the IRS housing geometry, covering the carrier bearings, inner and outer pinion bearings with matched Timken races, a full shim assortment, ring gear bolts, pinion nut, crush sleeve, pinion seal, oil baffles, slingers, thread locker, marking compound, and silicone. With \u003cstrong\u003eYK GM8.6IRS\u003c\/strong\u003e, the builder has a single-box, tailor-made solution engineered to restore factory differential function and eliminate leaks on high-performance Camaro platforms.\u003c\/p\u003e\n\n\u003ch4\u003eFeatures and Benefits\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003ePurpose-built for the GM 8.6-inch (218mm) IRS rear differential on 2010-2015 Camaro V8 models\u003c\/li\u003e\n\u003cli\u003eTimken carrier bearings and races matched to the IRS housing dimensions\u003c\/li\u003e\n\u003cli\u003eTimken inner and outer pinion bearings with precision races for accurate preload\u003c\/li\u003e\n\u003cli\u003eComplete shim assortment for carrier and pinion depth adjustments\u003c\/li\u003e\n\u003cli\u003eHigh-quality pinion seal engineered to withstand high-RPM and performance driving\u003c\/li\u003e\n\u003cli\u003eCrush sleeve included for correct pinion bearing preload setup\u003c\/li\u003e\n\u003cli\u003eOil baffles and slingers included to protect bearings under high-speed conditions\u003c\/li\u003e\n\u003cli\u003eRing gear bolts and thread locking compound included\u003c\/li\u003e\n\u003cli\u003ePinion nut for final assembly\u003c\/li\u003e\n\u003cli\u003eGear marking compound and brush for contact-pattern verification\u003c\/li\u003e\n\u003cli\u003eRTV silicone for differential cover sealing\u003c\/li\u003e\n\u003cli\u003e1-year manufacturer warranty against defects\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch4\u003eVehicle Fitment\u003c\/h4\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eYear\u003c\/th\u003e\n\u003cth\u003eMake\u003c\/th\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003cth\u003eTrim\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e2010\u003c\/td\u003e\n\u003ctd\u003eChevrolet\u003c\/td\u003e\n\u003ctd\u003eCamaro\u003c\/td\u003e\n\u003ctd\u003eSS\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2011\u003c\/td\u003e\n\u003ctd\u003eChevrolet\u003c\/td\u003e\n\u003ctd\u003eCamaro\u003c\/td\u003e\n\u003ctd\u003eSS\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2012\u003c\/td\u003e\n\u003ctd\u003eChevrolet\u003c\/td\u003e\n\u003ctd\u003eCamaro\u003c\/td\u003e\n\u003ctd\u003eSS, ZL1\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2013\u003c\/td\u003e\n\u003ctd\u003eChevrolet\u003c\/td\u003e\n\u003ctd\u003eCamaro\u003c\/td\u003e\n\u003ctd\u003eSS, ZL1\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2014\u003c\/td\u003e\n\u003ctd\u003eChevrolet\u003c\/td\u003e\n\u003ctd\u003eCamaro\u003c\/td\u003e\n\u003ctd\u003eSS, Z\/28, ZL1\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2015\u003c\/td\u003e\n\u003ctd\u003eChevrolet\u003c\/td\u003e\n\u003ctd\u003eCamaro\u003c\/td\u003e\n\u003ctd\u003eSS, Z\/28, ZL1\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch4\u003eSpecifications\u003c\/h4\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eAttribute\u003c\/th\u003e\n\u003cth\u003eDetail\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003ePart Number\u003c\/td\u003e\n\u003ctd\u003eYK GM8.6IRS\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eUPC\u003c\/td\u003e\n\u003ctd\u003e883584141693\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDifferential\u003c\/td\u003e\n\u003ctd\u003eGM 8.6-inch (218mm) IRS Rear\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRing Gear Size\u003c\/td\u003e\n\u003ctd\u003e8.6 in. (218mm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePinion Spline Count\u003c\/td\u003e\n\u003ctd\u003e32\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCover Bolts\u003c\/td\u003e\n\u003ctd\u003e10\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRing Gear Bolts\u003c\/td\u003e\n\u003ctd\u003e10\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCarrier Bearings Included\u003c\/td\u003e\n\u003ctd\u003eYes (Timken)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePinion Bearings Included\u003c\/td\u003e\n\u003ctd\u003eYes (Timken)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePinion Seal Included\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eShim Set Included\u003c\/td\u003e\n\u003ctd\u003eYes (complete carrier and pinion)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCrush Sleeve Included\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWarranty\u003c\/td\u003e\n\u003ctd\u003e1 Year Against Manufacturer Defects\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch4\u003eWhat Is Included\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eTimken carrier bearings and races (pair) for IRS housing\u003c\/li\u003e\n\u003cli\u003eTimken inner pinion bearing and race\u003c\/li\u003e\n\u003cli\u003eTimken outer pinion bearing and race\u003c\/li\u003e\n\u003cli\u003eHigh-quality pinion seal\u003c\/li\u003e\n\u003cli\u003eComplete shim kit (carrier and pinion depth)\u003c\/li\u003e\n\u003cli\u003eRing gear bolts (10-bolt pattern)\u003c\/li\u003e\n\u003cli\u003ePinion nut\u003c\/li\u003e\n\u003cli\u003eCrush sleeve\u003c\/li\u003e\n\u003cli\u003eOil baffles and slingers\u003c\/li\u003e\n\u003cli\u003eThread locking compound\u003c\/li\u003e\n\u003cli\u003eGear marking compound with brush\u003c\/li\u003e\n\u003cli\u003eRTV silicone for differential cover\u003c\/li\u003e\n\u003cli\u003e20-page installation instruction sheet\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch4\u003eFrequently Asked Questions\u003c\/h4\u003e\n\u003cp\u003e\u003cstrong\u003eDoes the YK GM8.6IRS include a crush sleeve?\u003c\/strong\u003e\u003cbr\u003eYes. The \u003cstrong\u003eYK GM8.6IRS\u003c\/strong\u003e includes a crush sleeve sized for the GM 8.6-inch IRS differential found in the 2010-2015 Camaro.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat differential does YK GM8.6IRS fit?\u003c\/strong\u003e\u003cbr\u003eThe \u003cstrong\u003eYK GM8.6IRS\u003c\/strong\u003e is specifically designed for the GM 8.6-inch (218mm) Independent Rear Suspension differential used in 2010-2015 Chevrolet Camaro models equipped with V8 engines. It is not compatible with solid-axle or non-IRS versions of the GM 8.6-inch axle.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDoes YK GM8.6IRS fit V6 Camaro models?\u003c\/strong\u003e\u003cbr\u003eNo. The \u003cstrong\u003eYK GM8.6IRS\u003c\/strong\u003e is designed for the V8 Camaro IRS differential. V6 Camaro models use a different differential housing and require a separate kit.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDoes YK GM8.6IRS include oil baffles and slingers?\u003c\/strong\u003e\u003cbr\u003eYes. Oil baffles and slingers are included in the \u003cstrong\u003eYK GM8.6IRS\u003c\/strong\u003e to protect bearings under high-RPM and performance use.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDoes YK GM8.6IRS include ring gear bolts?\u003c\/strong\u003e\u003cbr\u003eYes. Ring gear bolts and thread locking compound are included in the \u003cstrong\u003eYK GM8.6IRS\u003c\/strong\u003e kit.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAre Timken bearings used in YK GM8.6IRS?\u003c\/strong\u003e\u003cbr\u003eYes. Both carrier and pinion bearings in \u003cstrong\u003eYK GM8.6IRS\u003c\/strong\u003e are Timken-brand for OEM-quality performance in the demanding Camaro IRS environment.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat warranty covers YK GM8.6IRS?\u003c\/strong\u003e\u003cbr\u003eYukon Gear backs the \u003cstrong\u003eYK GM8.6IRS\u003c\/strong\u003e with a 1-year limited warranty against manufacturer defects. Under the Magnuson-Moss Warranty Act, this written warranty gives you specific legal rights, and you may also have additional rights that vary by state.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDoes YK GM8.6IRS include installation instructions?\u003c\/strong\u003e\u003cbr\u003eYes. A 20-page differential installation instruction sheet is included with \u003cstrong\u003eYK GM8.6IRS\u003c\/strong\u003e.\u003c\/p\u003e\n\n\u003ch4\u003eInstallation Overview\u003c\/h4\u003e\n\u003col\u003e\n\u003cli\u003eSupport the vehicle safely; remove the rear subframe or IRS cradle as required for access.\u003c\/li\u003e\n\u003cli\u003eDrain gear oil and remove the differential cover; clean all mating surfaces.\u003c\/li\u003e\n\u003cli\u003eRemove the carrier assembly; inspect the housing bore and bearing pockets for wear.\u003c\/li\u003e\n\u003cli\u003ePress out the existing pinion and remove all old bearings and races.\u003c\/li\u003e\n\u003cli\u003eInstall new Timken inner and outer pinion bearing races into the housing bores.\u003c\/li\u003e\n\u003cli\u003eSet pinion depth using shims from the \u003cstrong\u003eYK GM8.6IRS\u003c\/strong\u003e kit and a dial indicator.\u003c\/li\u003e\n\u003cli\u003eInstall the crush sleeve and new inner pinion bearing; insert pinion into housing.\u003c\/li\u003e\n\u003cli\u003eInstall the outer pinion bearing, oil slinger, and new pinion seal from the kit.\u003c\/li\u003e\n\u003cli\u003eInstall yoke and tighten the new pinion nut to the specified bearing preload.\u003c\/li\u003e\n\u003cli\u003ePress new Timken carrier bearings onto the carrier; lower carrier into housing.\u003c\/li\u003e\n\u003cli\u003eAdjust carrier shims to set factory-specified ring gear backlash.\u003c\/li\u003e\n\u003cli\u003eApply marking compound; verify contact pattern and adjust as needed.\u003c\/li\u003e\n\u003cli\u003eTorque ring gear bolts with included thread locker to specification.\u003c\/li\u003e\n\u003cli\u003eSeal differential cover with included silicone; refill with appropriate gear oil.\u003c\/li\u003e\n\u003c\/ol\u003e\n\n\u003cp\u003e\u003cstrong\u003eProposition 65 Warning:\u003c\/strong\u003e This product can expose you to chemicals including arsenic, which is known to the State of California to cause cancer. For more information, go to \u003ca href=\"https:\/\/www.p65warnings.ca.gov\"\u003ewww.P65Warnings.ca.gov\u003c\/a\u003e.\u003c\/p\u003e","brand":"Yukon Gear \u0026 Axle","offers":[{"title":"Default Title","offer_id":40481888239695,"sku":"YUKYK GM8.6IRS","price":675.89,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1062\/7920\/files\/yukon-gear-master-overhaul-kit-for-10-camaro-w-v8-differential-overhaul-kits-yukon-gear-axle.jpg?v=1699978449","url":"https:\/\/www.blackopsautoworks.com\/products\/yukon-gear-master-overhaul-kit-for-10-camaro-w-v8","provider":"Black Ops Auto Works","version":"1.0","type":"link"}