This aFe suspension component is the Control Lowering Springs 2015 Ford Mustang GT for 2019-2020 Ford Mustang. Verify drivetrain, trim, ride-height range, bar or spring rate, mounting points, wheel and tire clearance, alignment needs, and intended street or off-road use.
Key Features
- Application-specific handling or ride-height configuration
- Mounting, alignment, clearance, rate, adjustment, and intended-use requirements are model specific
Fitment
| Years | Make | Model | Application |
|---|---|---|---|
| 2019-2020 | Ford | Mustang | Bullitt |
| 2015-2026 | Ford | Mustang | GT |
| 2015 | Ford | Mustang | GT 50 Years Limited Edition |
| 2015-2021 | Ford | Mustang | GT Premium |
| 2021 | Ford | Mustang | Mach 1 |
| 2015-2018 | Ford | Mustang | Shelby GT350 |
| 2015-2018 | Ford | Mustang | Shelby GT350R |
| 2020-2021 | Ford | Mustang | Shelby GT500 |
Specifications
| Brand | aFe Power |
|---|---|
| Manufacturer Part Number | 410-301001-N |
| Product Type | Lowering Springs |
| Condition | New |
| Configuration | Control Lowering Springs 2015 Ford Mustang GT |
What's Included
One new aFe lowering spring in the exact configuration and quantity identified by this listing. Hardware, clamps, couplers, gaskets, sensors, wiring, fluids, calibration, and accessories are included only when expressly stated.
About aFe Power
aFe Power develops application-specific intake, filtration, exhaust, cooling, tuning, suspension, drivetrain, and truck-performance components supported by product testing and documented installation requirements.
Important Disclosures
- California Proposition 65 warning: this product can expose you to chemicals known to the State of California to cause cancer and reproductive harm.
Related Parts
- aFe Control PFADT Series Lowering Kit; Chevrolet Corvette (C6/C7) 05-15
- aFe Control PFADT Series Lowering Springs; 10-14 Chevrolet Camaro V6, V8
- Shop the complete aFe Power collection
Frequently Asked Questions
Will the Control Lowering Springs 2015 Ford Mustang GT fit my suspension configuration (aFe 410-301001-N)?
Match drivetrain, trim, factory suspension, ride height, wheel and tire package, and any exclusions shown for this exact product.
Will an alignment be required?
An alignment is recommended whenever ride height or suspension geometry changes and may also be needed after replacing bars, arms, links, or mounts.
Does the kit change ride quality?
Ride and handling depend on rates, adjustment, bushings, tire setup, and installation. Use the settings recommended for the intended street or off-road use.
Should fasteners be rechecked after installation?
Yes. Torque fasteners at the specified suspension position, inspect clearance, and recheck hardware after the initial driving cycle.
Installation Instructions
- Confirm aFe part number 410-301001-N, the complete vehicle or specification-based application, and all required supporting components.
- Support the vehicle at approved points, record ride height and alignment condition, and compare every mount and component before disassembly.
- Install hardware in the documented orientation and torque sequence, tightening pivot bushings at the specified ride position where required.
- Verify full steering and suspension travel, wheel and tire clearance, alignment, and fastener torque before normal driving.
aFe
Shop aFe Power cold air intakes, air filters, exhaust systems, intercoolers, charge pipes, tuning modules, suspension parts, drivetrain components, and truck accessories. Match every part by exact aFe manufacturer number and verify the complete vehicle, engine, drivetrain, emissions classification, dimensions, and included hardware before ordering. Cold Air Intakes and Performance Filters Choose an aFe intake by exact vehicle and engine application, then compare tube design, sensor provisions, housing configuration, emissions status, and filter media. Pro DRY S dry media is serviced without filter oil, while oiled media options follow their own cleaning and re-oiling procedures. Replacement and universal filters must be matched by flange size, panel dimensions, seal design, height, and airflow direction. aFe Power Exhaust Systems and Emissions Fitment Cat-back, axle-back, DPF-back, header, downpipe, mid-pipe, and related exhaust parts can vary by body style, cab and bed, wheelbase...
View aFe Products
Ford Mustang Parts & Accessories
Ford Mustang parts and accessories for every generation are stocked at Black Ops Auto Works. Shop cold air intakes, cat-back and axle-back exhaust systems, headers, coilovers, lowering springs, sway bars, brake pads, brake rotors, big brake kits, carbon fiber body parts, wheel spacers, fuel system components, and lighting upgrades for the Fox Body, SN95, New Edge, S197, and S550/S650 platforms, including EcoBoost, GT, Mach 1, Shelby GT350, Shelby GT500, and Dark Horse. Every product is filterable by year, make, model, trim, engine, and drivetrain so the correct part ships the first time. Black Ops Auto Works carries 2,101 Ford Mustang SKUs across suspension, brakes, exhaust, intake, exterior, and drivetrain categories. What This Collection Covers The Ford Mustang has run through six generations since 1964, and each one uses different suspension geometry, brake hardware, exhaust routing, and body dimensions. This collection groups parts confirmed to fit specific Mustang generatio...
View Ford Mustang Parts & Accessories Products
Lowering Springs
Shop lowering springs from Eibach, H&R, Swift Springs, RS-R, UMI Performance, MaxTrac, aFe Control, Ford Racing, Whiteline, Vogtland, ST Suspensions, Belltech, Skyjacker, and Black Ops Auto Works. Find sport lowering springs, Pro-Kit springs, Sportline springs, Spec-R springs, Super Sport springs, Race springs, Down Sus springs, adjustable lowering springs, SUV lowering springs, truck lowering springs, and EV lowering springs for street cars, muscle cars, sport compacts, European performance platforms, SUVs, trucks, and modern EV builds. Lowering springs are the simplest way to drop a vehicle’s ride height. They keep the OE shocks, upper mounts, and suspension geometry components in place and swap only the coil springs for shorter, progressively- or linearly-wound performance springs. Shop by vehicle year, make, model, trim, drop height, spring type (progressive vs linear), and application (street, show, mild-handling, SUV, EV, truck). Lowering springs are the correct choice...
View Lowering Springs Products
Suspension
Suspension parts and complete kits for cars, trucks, SUVs, Jeeps, and off-road builds are stocked at Black Ops Auto Works. Shop coilovers, lowering springs, lift kits, leveling kits, shocks and struts, sway bars, control arms, tie rods, ball joints, bushings, chassis bracing, alignment hardware, air suspension, and complete stage kits from Bilstein, KW, Ohlins, Fox, KING, ICON, BC Racing, Silvers, Eibach, H&R, Swift Springs, Whiteline, Energy Suspension, Moog, SPC Performance, Rough Country, ReadyLIFT, BDS, Skyjacker, Air Lift, Firestone, and Black Ops Auto Works. Start with a matched shock and spring package or a full coilover kit, then layer in sway bars, chassis bracing, and camber adjustment hardware. Every part is filterable by year, make, model, trim, and drivetrain to confirm fitment before ordering. What This Category Covers Suspension is the highest-leverage handling upgrade on any vehicle. A properly matched shock, spring, and sway bar package produces measurable i...
View Suspension Products


