Click to zoom in
This aFe filtration component is the Magnum FLOW Pro DRY S Universal Air Filter F-5in. / B-(8.5 x 4) MT2 / T-(7.5) / H-9in.. Match the exact dimensions, media type, service method, mounting interface, flow requirement, and fluid or air-system application before ordering.
Key Features
- Media and dimensions selected for the listed filtration application
- Service method, flow direction, seal, and replacement interval are model specific
- Cleaner Airflow Into Your Engine Starts With the Right Filter The aFe Pro DRY S air filter 21-90108 is a high-flow replacement filter built to outperform the factory paper element in both filtration efficiency and
- Engineered from oil-free dry media, this filter delivers measurably higher flow rates than stock while maintaining the filtration needed to protect your engine.
Fitment
| Years | Make | Model | Application |
|---|---|---|---|
| Universal or specification-matched application. Verify every dimension, interface, operating requirement, and listing note. | |||
Specifications
| Brand | aFe Power |
|---|---|
| Manufacturer Part Number | 21-90108 |
| Product Type | Air Filters - Universal Fit |
| Condition | New |
| Configuration | Magnum FLOW Pro DRY S Universal Air Filter F-5in. / B-(8.5 x 4) MT2 / T-(7.5) / H-9in. |
| Filter media | oil-free dry media for superior flow and filtration balance |
| Detail | Value |
| Filter Type | High-Flow Replacement |
| Reusable | Yes |
| UPC | 802959212226 |
| WARNING | This product can expose you to chemicals including lead and phthalates, which are known to the State of California to cause cancer and reproductive harm. For more information go to www.P65Warnings.ca.gov. |
| Listed Dimension | 5in |
What's Included
One new aFe air filters - universal fit in the exact configuration and quantity identified by this listing. Hardware, clamps, couplers, gaskets, sensors, wiring, fluids, calibration, and accessories are included only when expressly stated.
About aFe Power
aFe Power develops application-specific intake, filtration, exhaust, cooling, tuning, suspension, drivetrain, and truck-performance components supported by product testing and documented installation requirements.
Important Disclosures
- California Proposition 65 warning: this product can expose you to chemicals known to the State of California to cause cancer and reproductive harm.
Related Parts
- aFe MagnumFLOW Air Filters OER Pro Dry S A/F 16-17 Cadillac ATS-V V6-3.6L (tt)
- aFe MagnumFLOW Air Filters OER PDS Ford Diesel Trucks 2017 6.7L V8
- Shop the complete aFe Power collection
Frequently Asked Questions
How do I confirm the dimensions of the Magnum FLOW Pro DRY S Universal Air Filter F-5in. / B-(8.5 x 4) MT2 / T-(7.5) / H-9in. (aFe 21-90108)?
Match the flange or panel dimensions, shape, seal, height, and mounting interface; similar-looking filters are not necessarily interchangeable.
Is this filter washable and reusable?
That depends on its exact media. Follow the aFe cleaning or replacement instructions for the listed media and never oil a dry-media filter.
How often should the filter be serviced?
Inspect it based on driving conditions and restriction rather than mileage alone. Dust, water, off-road use, and construction traffic can shorten the interval.
Can I substitute a different aFe media type?
Only when aFe lists that media as a direct replacement for the same housing and dimensions. Confirm the exact replacement part number before ordering.
Installation Instructions
- Confirm aFe part number 21-90108, the complete vehicle or specification-based application, and all required supporting components.
- Clean the housing and sealing surface so debris cannot enter the intake, cabin, engine, transmission, or fuel system.
- Install the element in the specified flow direction and orientation without distorting its seal or contaminating clean surfaces.
- Verify the housing closes evenly and record the correct inspection, cleaning, or replacement interval for the operating conditions.
aFe
Shop aFe Power cold air intakes, air filters, exhaust systems, intercoolers, charge pipes, tuning modules, suspension parts, drivetrain components, and truck accessories. Match every part by exact aFe manufacturer number and verify the complete vehicle, engine, drivetrain, emissions classification, dimensions, and included hardware before ordering. Cold Air Intakes and Performance Filters Choose an aFe intake by exact vehicle and engine application, then compare tube design, sensor provisions, housing configuration, emissions status, and filter media. Pro DRY S dry media is serviced without filter oil, while oiled media options follow their own cleaning and re-oiling procedures. Replacement and universal filters must be matched by flange size, panel dimensions, seal design, height, and airflow direction. aFe Power Exhaust Systems and Emissions Fitment Cat-back, axle-back, DPF-back, header, downpipe, mid-pipe, and related exhaust parts can vary by body style, cab and bed, wheelbase...
View aFe Products
Air Filters
Air filters and intake filtration parts for cars, trucks, SUVs, Jeeps, and diesel platforms are stocked at Black Ops Auto Works. Shop direct-fit filters, drop-in replacement filters, universal clamp-on filters, cabin air filters, HVAC filters, engine breather filters, pre-filters, and velocity stacks for Hellcat, Trackhawk, TRX, Grand Cherokee, Challenger, Charger, Camaro, Corvette, Mustang, F-150, Tacoma, Tundra, BMW, and Honda platforms. Every product is filterable by year, make, model, trim, engine, and filter dimension so the correct part ships the first time. Black Ops Auto Works carries 3,397 air filter SKUs across direct-fit, universal, cabin, and pre-filter categories. What This Collection Covers Air filters remove dirt, dust, and debris from air entering the engine or cabin. This collection spans OE-style direct-fit and drop-in filters, universal cone and clamp-on filters for custom intakes, cabin and HVAC filters for interior air, engine breather filters for crankcase ...
View Air Filters Products
Air Filters - Universal Fit
Shop universal air filters for custom intake tubes, turbo inlets, carburetors, velocity stacks, crankcase breathers, and fabricated performance systems. Compare clamp-on cone filters, open-funnel designs, oval and tapered filters, carbureted air-cleaner assemblies, reusable oiled media, and dry synthetic options. Universal fitment depends on exact measurements, available space, mounting orientation, and the intended airflow path—not year, make, and model alone. Universal Air Filters for Custom Intake Builds A universal filter is selected by dimensions and interface. The flange inside diameter must match the intake tube, turbo inlet, velocity stack, carburetor neck, or breather connection. The filter body must also clear nearby panels, wiring, hoses, heat shields, suspension components, and the hood while leaving enough exposed media for the application. Measure the installation area before ordering. Record the flange size, base width, top width, overall height, filter shape, mounti...
View Air Filters - Universal Fit Products