Size Chart
×
The COBB 22-23 VW Golf R (MK8) / 22-24 Audi S3 (8Y) Redline Carbon Fiber Intake System does not have enough exact application evidence to assign safe vehicle YMM. Match manufacturer part number 7A2160, complete vehicle, engine and transmission configuration, factory equipment, required calibration, emissions eligibility, interfaces, and every product note before ordering.
Key Features
Fitment
| Fitment Status | Fitment Verification Required |
|---|---|
| Vehicle YMM | Not assigned without exact application evidence |
| Required Verification | Confirm exact vehicle, engine, transmission, factory equipment, calibration, emissions eligibility, interfaces, and part number |
Specifications
| Manufacturer | COBB |
|---|---|
| Manufacturer Part Number | 7A2160 |
| Product Type | Cold Air Intakes |
| Fitment Type | Fitment verification required |
What's Included
One new COBB product in the exact configuration and quantity identified by manufacturer part number 7A2160. Calibrations, hardware, hoses, clamps, gaskets, adapters, wiring, fluids, tools, and companion components are included only when expressly stated for this exact part number.
About COBB
COBB develops engine-management, intake, cooling, exhaust, drivetrain, suspension, and vehicle-accessory products for supported performance platforms. Correct selection remains exact-vehicle, exact-configuration, exact-interface, and exact-part-number specific.
Related COBB Products
Browse the COBB collection for related tuning, intake, cooling, exhaust, drivetrain, and chassis products.
Frequently Asked Questions
Why is fitment verification required for this COBB product?
Exact vehicle application evidence is not complete enough for safe YMM. Confirm the vehicle, drivetrain, factory equipment, calibration, emissions eligibility, interfaces, and exact part number before ordering.
Are all supporting parts included?
Only components expressly listed for the exact manufacturer part number are included. Tuning, hardware, hoses, clamps, gaskets, adapters, wiring, fluids, and companion components may be separate.
Is tuning or calibration required after installation?
Requirements depend on the exact product and vehicle. Intake, fuel, boost, turbo, and engine-management changes may require a compatible calibration before operation.
Installation Instructions
Follow the current COBB and factory service instructions for this exact part number. Verify fitment, factory equipment, emissions eligibility, required calibration, software and firmware, interfaces, hardware, fluid or electrical connections, and clearances before installation. Inspect the completed work and confirm safe operation before full-load use.
Shop cold air intakes, short ram intakes, enclosed air boxes, intake tubes, mass air flow sensors, snorkels, scoops, silicone couplers, replacement filters, and intake service components at Black Ops Auto Works. This collection covers complete vehicle-specific intake systems and supporting components for performance cars, trucks, SUVs, Jeeps, diesel vehicles, off-road builds, and custom fabrication projects. Performance Air Intake Systems and Components An engine air intake system filters incoming air and delivers it to the throttle body, turbocharger, or supercharger inlet. Aftermarket systems may change the intake path, filter location, tubing size, air-box design, induction sound, and airflow characteristics. The results depend on the exact vehicle, engine calibration, intake design, installed modifications, and operating conditions. This collection includes products from Legmaker Intakes, aFe POWER, JLT, K&N, AIRAID, CORSA Performance, Injen, Spectre, Granatelli, Vibrant Per...
View Air Intake Systems Products
Carbon fiber parts and accessories for Jeep Grand Cherokee, Trackhawk, Dodge Charger, Challenger, Durango, Chrysler 300, Ford Mustang, and Chevrolet Camaro and Corvette are stocked at Black Ops Auto Works. Shop carbon fiber hoods, front splitters, rear spoilers, diffusers, side skirts, mirror covers, headlight covers, badges, and interior trim for Hellcat, Trackhawk, Demon, SRT, and HEMI 6.2L and 6.4L platforms. Every part is filterable by year, make, model, trim, and engine so the correct fitment ships the first time. Black Ops Auto Works carries 2,338 carbon fiber SKUs across hoods, aero, and trim categories. What This Category Covers Carbon fiber parts combine weight reduction with aggressive styling for builds that want a performance look without sacrificing strength. This category spans full hood replacements, splitters and diffusers for aerodynamic upgrades, and smaller trim and badge pieces that finish off an interior or exterior refresh. Why Carbon Fiber Carbon fiber pan...
View Carbon Fiber Parts & Accessories Products
Shop COBB Tuning Accessport systems, performance intakes, intercoolers, exhaust components, drivetrain upgrades, suspension parts, Redline carbon fiber accessories, and vehicle-specific hardware at Black Ops Auto Works. Our COBB collection supports enthusiast platforms from Subaru, Ford, Volkswagen, Audi, Porsche, Mazda, Nissan, Honda, Acura, Toyota, and Lexus. COBB products are engineered as complete vehicle-specific solutions, but fitment, calibration, fuel, transmission, emissions eligibility, and supporting modifications can vary by exact application. Use the year-make-model filters and confirm the manufacturer part number before ordering. COBB Accessport Tuners and Engine Management The COBB Accessport is a handheld engine-management platform available for supported turbocharged cars, trucks, and SUVs. Depending on the vehicle, it may provide ECU or transmission flashing, data monitoring, diagnostic functions, performance maps, and support for custom calibration. Compatibility...
View COBB Products
Shop cold air intakes, short ram intakes, closed-airbox intake systems, replacement air filters, intake tubes, and MAF housings from K&N, AEM, aFe Power, Airaid, S&B Filters, Injen, Roush, Volant, Corsa, Mishimoto, HPS Performance, Cobb Tuning, JLT, Vararam, Steeda, and other performance intake brands. Find full open-element cold air intakes, sealed-airbox systems, dry and oiled air filters, replacement drop-in filter panels, MAF sensor housings, and complete intake tube kits. Cold air intakes for domestic muscle, sport-compact tuners, diesel trucks, off-road 4x4, Euro performance, and modern sport SUVs Mustang, Camaro, Challenger, Charger, F-150, Silverado, Ram, Tundra, Tacoma, 4Runner, Wrangler, Bronco, Cummins, Duramax, Power Stroke, WRX/STi, Civic Type R, GR86, Supra, GR Corolla, BMW M2/M3/M4, Golf R, and hundreds of additional platforms. Filter by vehicle, intake style (open element, closed airbox, short ram, tube kit), filter media (oiled cotton, dry synthetic), tun...
View Cold Air Intakes Products