Click to zoom in
The Mahle forged piston kit identified by manufacturer part number 930020362 is designed to provide the piston geometry and compression configuration for a measured performance-engine build. Final compatibility depends on the complete engine combination and measured dimensions, not the product title alone.
Key Features
- Exact manufacturer part number for application verification
- Measured dimensions organized in the specifications
- Designed for professional engine machining and assembly
- Requires final clearance and compatibility checks before installation
Fitment
| Fitment Status | Engine and build verification required |
|---|---|
| Required Verification | Engine code, bore, stroke, rod length, pin diameter, cylinder head, compression target, and machine-shop measurements |
Specifications
| Brand | Mahle |
|---|---|
| Manufacturer Part Number | 930020362 |
| Product Type | Forged Piston Kit |
| Fitment Type | Fitment Verification Required |
| Condition | New |
| Manufacturer Guide Match | Exact part number verified |
| Bore Diameter | 93.00 mm |
| Stroke | 75.0 mm |
| Connecting Rod Length | 130.4 mm |
| Compression Ratio | 8.0:1 |
| Crown Volume | -12 cc |
| Quantity | 4 |
What's Included
One new Mahle piston kit in the quantity and configuration stated in the specifications. Rings, pins, locks, and coatings are included only when expressly listed for this exact part number.
About Mahle
Mahle develops pistons, piston rings, bearings, filtration, thermal-management, and engine components for original-equipment, replacement, and motorsport applications.
Related Mahle Products
- Shop all Mahle products
- Mahle MS Piston Set Subaru EJ20/207 92.50mm Bore 75.0mm Stroke 130.4mm Rod -12cc 8.0 CR Set of 4
- Mahle MS Piston Set EJ20/207 92.50mm Bore 79.0mm Stroke 130.4mm Rod 23mm Pin -16cc 8.0 CR Set of 4
- Mahle MS Piston Set Subaru EJ20/207 92mm Bore 75mm Stroke 130.4mm Rod 23mm Pin -12cc 8.5 CR Set of 4
Frequently Asked Questions
How do I verify the engine application for Mahle 930020362?
Match the exact MAHLE part number and engine code, then confirm bore, stroke, rod length, pin diameter, cylinder head, compression target, and all machine-shop measurements.
Are rings, pins, and locks included with this piston kit?
Included hardware varies by exact part number. Confirm the current MAHLE package contents before assembly and do not assume components from a similar piston kit are interchangeable.
What must the machine shop measure before final assembly?
Verify finished bore, piston-to-wall clearance, ring end gaps, deck height, piston-to-valve clearance, wrist-pin fit, bearing clearances, and final compression ratio for the intended fuel and power level.
Installation Instructions
Use the current Mahle instructions for part number 930020362 and the engine builder's measured assembly specifications. A qualified machine shop must verify bore finish, clearances, ring gaps, pin fit, lock installation, orientation, balance, deck height, valve clearance, compression ratio, lubrication, and break-in before operation.
Engine
Shop automotive engine parts, cooling-system components, oil-system upgrades, ignition parts, pulleys, sensors, gaskets, fuel components, and engine-bay accessories at Black Ops Auto Works. This collection covers vehicle-specific replacement parts, performance upgrades, supporting hardware, and universal components for street cars, trucks, SUVs, Jeeps, diesel vehicles, off-road builds, and motorsport applications. Engine Parts and Performance Components The Engine collection brings together components used throughout the engine, lubrication system, cooling system, ignition system, fuel system, crankcase ventilation, accessory drive, and engine compartment. Available products range from replacement sensors and gaskets to rotating-assembly parts, performance cooling systems, supercharger pulleys, catch cans, cylinder heads, camshafts, intake manifolds, and engine-bay dress-up components. Engine compatibility cannot be determined from vehicle model alone. Confirm the exact year, make, ...
View Engine Products
Mahle
Shop Mahle forged pistons, diesel piston kits, and performance piston rings by exact manufacturer part number, measured dimensions, and verified engine application. Choosing the Correct Mahle Engine Component Engine components must be selected from the complete measured build, not a similar vehicle or engine name. Confirm the current Mahle part number and every critical dimension with the engine builder before ordering. Match engine code, finished bore, stroke, connecting-rod length, wrist-pin diameter, and cylinder head Confirm crown volume, compression height, compression target, fuel, boost, and intended power level Match piston-ring bore and every groove thickness before machining Verify rings, pins, locks, coatings, and quantity for the exact part number Use professional machining and measured assembly clearances Related Engine Collections Pistons Piston Rings Engine Components Connecting Rods Frequently Asked Questions How do I confirm a Mahle piston kit fits my engine bu...
View Mahle Products