Click to zoom in
The Mahle OE oe piston ring set identified by manufacturer part number 41618 is designed to restore combustion sealing and oil control when matched to the exact piston grooves and finished bore. Final compatibility depends on the exact engine and measured dimensions, not a similar vehicle name alone.
Key Features
- Exact MAHLE OE manufacturer part number
- Application and dimensional details organized for verification
- Designed for measured engine rebuilding
- Requires final machining and clearance checks before installation
Fitment
| Years | Make | Model | Application |
|---|---|---|---|
| 1988-1991 | Honda | CRX | Verify engine and piston or ring configuration |
| 1988-2000 | Honda | Civic | Verify engine and piston or ring configuration |
Specifications
| Brand | Mahle OE |
|---|---|
| Manufacturer Part Number | 41618 |
| Product Type | OE Piston Ring Set |
| Fitment Type | Vehicle Specific |
| Condition | New |
| Engine Displacement | 1.5 L |
What's Included
One new Mahle OE piston ring set in the exact size and configuration stated in the specifications. Pistons and installation tools are not included unless expressly listed.
About Mahle OE
Mahle supplies original-equipment and replacement pistons, piston rings, bearings, filtration, thermal-management, and engine components for professional automotive and commercial-engine service.
Related Mahle OE Products
- Shop all Mahle OE products
- Mahle Rings Ford Pass 112 1.8L Eng 91-94 Mazda 1839cc Eng 90-93 Chrome Ring Set
- Mahle Rings Honda 1.7L VTEC D17A1 D17A2 D17A6 2001 - 2005 Chrome Ring Set
- Mahle Rings Honda 3.5L 3471CC 1999 - 2010 Odyssey J35A6 J35A7 J35A9 J35Z1 Chrome Ring Set
Frequently Asked Questions
Will Mahle OE 41618 fit my 1988-1991 Honda CRX?
That vehicle range is listed, but compatibility also depends on the exact engine code, bore, piston design, ring dimensions, oversize, and every current MAHLE application note.
What measurements must match before ordering this ring set?
Confirm finished bore diameter, piston groove dimensions, top, second, and oil-ring thicknesses, cylinder count, ring material, and whether the set is standard or oversize.
Should the engine block be measured before installing new rings?
Yes. Measure bore diameter, taper, out-of-round, surface finish, piston groove clearance, and ring end gap in each assigned cylinder before assembly.
Installation Instructions
Use the current Mahle instructions for part number 41618 and the engine builder's measured assembly specifications. A qualified machine shop must verify bore finish, clearances, ring gaps, piston orientation, pin fit, deck height, valve clearance, compression ratio, lubrication, torque procedures, and break-in.
Engine
Shop automotive engine parts, cooling-system components, oil-system upgrades, ignition parts, pulleys, sensors, gaskets, fuel components, and engine-bay accessories at Black Ops Auto Works. This collection covers vehicle-specific replacement parts, performance upgrades, supporting hardware, and universal components for street cars, trucks, SUVs, Jeeps, diesel vehicles, off-road builds, and motorsport applications. Engine Parts and Performance Components The Engine collection brings together components used throughout the engine, lubrication system, cooling system, ignition system, fuel system, crankcase ventilation, accessory drive, and engine compartment. Available products range from replacement sensors and gaskets to rotating-assembly parts, performance cooling systems, supercharger pulleys, catch cans, cylinder heads, camshafts, intake manifolds, and engine-bay dress-up components. Engine compatibility cannot be determined from vehicle model alone. Confirm the exact year, make, ...
View Engine Products
Mahle OE
Shop Mahle OE replacement pistons and piston-ring sets by exact manufacturer part number, vehicle application, engine configuration, and measured dimensions. Choosing the Correct Mahle OE Engine Component Match the current MAHLE part number and complete engine application before ordering. Similar engine sizes can use different pistons, rings, oversizes, compression heights, and package quantities. Confirm year, make, model, engine code, displacement, and current application notes Match standard or oversize bore and the exact piston or ring configuration Verify piston orientation, compression ratio, pin hardware, and package quantity Measure bore diameter, taper, out-of-round, surface finish, and ring grooves Use professional machining and measured assembly clearances Related Engine Collections Pistons Piston Rings Engine Components Engine Rebuild Kits Frequently Asked Questions How do I confirm a Mahle OE piston or ring set fits my engine?Match the exact part number, year, make...
View Mahle OE Products