-11%
Click to zoom in
Restore or tune chassis control with a vehicle-specific Pedders lowering springs package matched to the exact application below. Year, make, model, trim, chassis, drivetrain, suspension option, mounting position, and current manufacturer notes must all be confirmed before ordering.
Key Features
- Application-tuned replacement coil spring
- Designed to alter ride height and suspension response
- Spring rate and lowering amount remain exact-part specific
- Wheel alignment required after installation
Fitment
| Years | Make | Model | Application Notes |
|---|---|---|---|
| 2014-2017 | Chevrolet | SS | Base |
| 2008-2009 | Pontiac | G8 | Base, GT, GXP |
Specifications
| Brand | Pedders |
|---|---|
| Manufacturer Part Number | PED-2957 |
| Product Type | Lowering Springs |
| Mounting Position | Rear |
| Fitment Type | Vehicle Specific |
| Condition | New |
| GTIN | 9341150009408 |
What's Included
One new Pedders lowering springs package identified by manufacturer part number PED-2957. Springs, dampers, mounts, bushings, endlinks, brackets, fasteners, tools, and companion parts are included only when expressly supplied for this exact part number.
About Pedders
Founded in Australia in 1950, Pedders develops vehicle-specific suspension, steering, and brake components for street, performance, towing, and load-carrying applications.
Related Pedders Products
- Shop all Pedders suspension products
- Pedders 08-09 Pontiac G8 SportsRyder FE2 Height Springs
- Pedders 08-09 Pontiac G8 SportsRyder Super Low Springs
- Pedders Front Spring Low 2006-2009 G8 EACH
Frequently Asked Questions
Will Pedders PED-2957 fit my 2014-2017 Chevrolet SS?
That year, make, and model range is listed, but trim, chassis, drivetrain, suspension option, mounting position, and every current manufacturer application note must also match.
Will Pedders PED-2957 change ride height?
Ride-height change depends on the exact kit and vehicle. Confirm the published adjustment range or fixed height change, then check tire clearance, suspension travel, alignment range, and local requirements.
Is an alignment required after installing Pedders PED-2957?
A professional alignment is required whenever ride height or suspension geometry changes and is strongly recommended after most suspension or steering work. Torque all fasteners at the specified vehicle position before final checks.
Installation Instructions
Follow the current Pedders instructions and factory service information for part PED-2957. Support the vehicle safely, verify every component and mounting position, replace required one-time-use hardware, tighten fasteners at the specified suspension position and torque, check hose, wire, tire, and chassis clearance through full travel, then complete a professional alignment and road test.
Lowering Springs
Shop lowering springs from Eibach, H&R, Swift Springs, RS-R, UMI Performance, MaxTrac, aFe Control, Ford Racing, Whiteline, Vogtland, ST Suspensions, Belltech, Skyjacker, and Black Ops Auto Works. Find sport lowering springs, Pro-Kit springs, Sportline springs, Spec-R springs, Super Sport springs, Race springs, Down Sus springs, adjustable lowering springs, SUV lowering springs, truck lowering springs, and EV lowering springs for street cars, muscle cars, sport compacts, European performance platforms, SUVs, trucks, and modern EV builds. Lowering springs are the simplest way to drop a vehicle’s ride height. They keep the OE shocks, upper mounts, and suspension geometry components in place and swap only the coil springs for shorter, progressively- or linearly-wound performance springs. Shop by vehicle year, make, model, trim, drop height, spring type (progressive vs linear), and application (street, show, mild-handling, SUV, EV, truck). Lowering springs are the correct choice...
View Lowering Springs Products
Pedders
Pedders suspension parts and accessories for Australian and American performance platforms are stocked at Black Ops Auto Works. Shop Extreme XA coilovers, Track4 shocks, lowering springs, sway bars, control arms, bushings, camber plates, struts, tie rods, end links and lift kits for Pontiac G8, Chevrolet SS, Pontiac GTO, Camaro, Corvette, Mustang, Ranger, Silverado and truck builds. Every product is filterable by year, make, model, trim, engine and drivetrain so the correct part ships the first time. Black Ops Auto Works carries 170 Pedders suspension SKUs across vehicle-specific fitment, performance upgrades, replacement parts, installation hardware and custom build needs. What This Collection Covers Pedders began in Australia and brings chassis knowledge from Holden and Commodore platforms to their American cousins, including the G8, Chevrolet SS and Pontiac GTO. The line also covers modern muscle cars, sports cars and trucks with street, track and off-road suspension options....
View Pedders Products
Suspension
Suspension parts and complete kits for cars, trucks, SUVs, Jeeps, and off-road builds are stocked at Black Ops Auto Works. Shop coilovers, lowering springs, lift kits, leveling kits, shocks and struts, sway bars, control arms, tie rods, ball joints, bushings, chassis bracing, alignment hardware, air suspension, and complete stage kits from Bilstein, KW, Ohlins, Fox, KING, ICON, BC Racing, Silvers, Eibach, H&R, Swift Springs, Whiteline, Energy Suspension, Moog, SPC Performance, Rough Country, ReadyLIFT, BDS, Skyjacker, Air Lift, Firestone, and Black Ops Auto Works. Start with a matched shock and spring package or a full coilover kit, then layer in sway bars, chassis bracing, and camber adjustment hardware. Every part is filterable by year, make, model, trim, and drivetrain to confirm fitment before ordering. What This Category Covers Suspension is the highest-leverage handling upgrade on any vehicle. A properly matched shock, spring, and sway bar package produces measurable i...
View Suspension Products