Support and isolate the coil spring at the listed mounting location with this exact polyurethane component configuration. Select Prothane part 6-1709 by its dimensions, location, color, included components, and verified vehicle application before ordering.
Key Features
- Polyurethane spring isolator or insert configuration
- Installed height and spring geometry must match the application
- Application and dimensions are controlled by the exact manufacturer part number
- Exact Prothane part number 6-1709
Fitment
| Years | Make | Model | Application Notes |
|---|---|---|---|
| 1999 | Ford | Mustang | SVT Cobra, SVT Cobra 10th Anniversary |
| 2001 | Ford | Mustang | SVT Cobra, SVT Cobra 10th Anniversary |
| 2003-2004 | Ford | Mustang | SVT Cobra, SVT Cobra 10th Anniversary |
Specifications
| Brand | Prothane |
|---|---|
| Manufacturer Part Number | 6-1709 |
| Product Type | Spring Insulators |
| Position | Application specific |
| Color | Red |
| Size or Configuration | Exact part-number configuration |
| Fitment Type | Vehicle Specific |
| Condition | New |
| GTIN | 636169161629 |
What's Included
The exact Prothane spring insulators package identified by manufacturer part number 6-1709, including only the bushings, sleeves, washers, brackets, lubricant, and hardware expressly supplied in the sealed manufacturer package.
About Prothane
Prothane manufactures application-focused polyurethane suspension, chassis, steering, engine-mount, driveline, and service components. Correct selection depends on the exact part number, vehicle application, dimensions, mounting location, and current manufacturer instructions.
Related Prothane Products
- Shop all Prothane products
- Prothane Jeep TJ Front Coil Spring Isolator - Black
- Prothane 64-69 AMC Front Coil Spring Isolator - Black
- Prothane Universal Coil Spring Inserts - 7.5in High - Red
Frequently Asked Questions
Will Prothane 6-1709 fit my Ford Mustang?
Use the year, make, and model table above, then confirm every trim, drivetrain, body style, suspension, mounting-position, and dimensional qualifier. A model match alone is not enough.
What should I verify before installing Prothane 6-1709?
Confirm spring diameter, installed height, upper or lower position, suspension travel, seating surface, and clearance at full compression and extension.
Should the fasteners be rechecked after installing Prothane 6-1709?
Yes. Follow the current Prothane and vehicle service instructions for torque procedure, suspension loading position, alignment, clearance checks, and the required post-installation inspection.
Installation
Follow the current Prothane instructions for part 6-1709 and the vehicle service procedure. Support the vehicle safely, compare every supplied component before disassembly, clean and inspect each mounting surface, use only specified lubricant and hardware, torque fasteners in the required loaded or unloaded position, confirm full travel and clearance, then complete any required alignment and post-installation recheck.
Prothane
Shop Prothane polyurethane suspension bushings, sway-bar components, body mounts, drivetrain mounts, spring isolators, bump stops, and service products by exact part number and verified application. Choosing the Correct Prothane Part Match the exact year, make, and model or confirm every dimension on a universal product Verify the mounting position, bar diameter, bracket, bushing width, sleeve, fastener, and body or cab configuration Review drivetrain, trim, body-style, transmission, and suspension qualifiers before ordering Follow the current Prothane instructions and vehicle service procedure during installation Related Prothane Products All Prothane Products Jeep CJ Front Spring and Shackle Bushings Universal 1-Inch Sway Bar Bushings Silverado and Sierra 36 mm Front Sway Bar Bushings Frequently Asked Questions How do I confirm a Prothane bushing fits my vehicle?Match the listed year, make, and model, then verify the mounting position, trim, drivetrain, body style, suspension...
View Prothane Products
Spring Insulators
Spring Insulators parts and accessories coil spring insulators, isolator pads, spring seats, spacer pads, leaf spring eye bushings, and shackle bushings for truck, SUV, Jeep, and performance car suspension setups are stocked at Black Ops Auto Works. Shop replacement parts that help control noise, protect mounting surfaces, and support proper spring location. Every product is filterable by year, make, model, trim, engine, and drivetrain so the correct part ships the first time. Black Ops Auto Works carries 92 Spring Insulators SKUs across fuel, air, suspension, and supporting hardware categories. What This Spring Insulators Collection Covers Spring insulators cover coil spring pads, leaf spring bushings, spring spacers, and related hardware across popular trucks, SUVs, Jeeps, and cars. Applications include Ford, Chevrolet, GMC, Ram, Jeep, Toyota, Nissan, Mustang, Camaro, and Land Cruiser platforms where a worn isolator or bushing can affect suspension refinement. Vehicle Specific...
View Spring Insulators Products
Suspension
Suspension parts and complete kits for cars, trucks, SUVs, Jeeps, and off-road builds are stocked at Black Ops Auto Works. Shop coilovers, lowering springs, lift kits, leveling kits, shocks and struts, sway bars, control arms, tie rods, ball joints, bushings, chassis bracing, alignment hardware, air suspension, and complete stage kits from Bilstein, KW, Ohlins, Fox, KING, ICON, BC Racing, Silvers, Eibach, H&R, Swift Springs, Whiteline, Energy Suspension, Moog, SPC Performance, Rough Country, ReadyLIFT, BDS, Skyjacker, Air Lift, Firestone, and Black Ops Auto Works. Start with a matched shock and spring package or a full coilover kit, then layer in sway bars, chassis bracing, and camber adjustment hardware. Every part is filterable by year, make, model, trim, and drivetrain to confirm fitment before ordering. What This Category Covers Suspension is the highest-leverage handling upgrade on any vehicle. A properly matched shock, spring, and sway bar package produces measurable i...
View Suspension Products


