Click to zoom in
This RockJock Body Lift Kit 1in Lift w Hardware is identified by manufacturer part number CE-9300. Confirm the vehicle or mating RockJock system, axle or mounting position, dimensions, thread or joint interface, and included quantity before ordering.
Key Features
- The RockJock 1 Inch Body Lift Kit for TJ Wrangler and Unlimited (LJ) vehicles allows you to clear a bigger tires without increasing your suspension lift
- This lifts your body, but by keeping the factory rubber as well, the ride inside the cab does not change at all, like it would if you replaced the rubber with solid urethane body lift pucks
- Kit also includes urethane spacers for the grille and all new, longer Grade 8 hardware for reattaching the body after lifting
- Exact-part-number lift kits for the stated vehicle or RockJock system
Fitment
| Years | Make | Model | Application |
|---|---|---|---|
| 1987-2006 | Jeep | Wrangler | All supported models |
| 2004-2006 | Jeep | Wrangler | Unlimited |
Specifications
| Brand | RockJock |
|---|---|
| Manufacturer Part Number | CE-9300 |
| Product Type | Lift Kits |
| Fitment Type | Vehicle Specific |
| Condition | New |
What's Included
One new RockJock lift kits in the quantity and configuration stated for manufacturer part number CE-9300. Companion suspension, steering, axle, hardware, tools, and accessories are included only when expressly listed.
Brand Information
RockJock 4x4 by John Currie develops suspension, steering, axle, joint, sway-bar, and service components for Jeep, Ford Bronco, and custom off-road applications. Selection and installation must follow the exact part number, vehicle or mating system, dimensions, mounting position, adjustment range, and current manufacturer instructions.
Related RockJock Products
- Shop all RockJock products
- RockJock HD Leaf Spring Plates and Shock Mounts For Use w 2 1/2in Springs
- RockJock Tow Bar Mounting Kit Steel Bumper
- RockJock Shifter Boot For Use w Twin Shifter Transfer Cases
Frequently Asked Questions
Will this RockJock lift kits fit a different vehicle?
Only the applications shown in the fitment table are supported. Match the exact year, make, model, body style when required, axle or mounting position, factory equipment, and every current manufacturer note before ordering.
What is included with RockJock CE-9300?
The listing includes the exact new component, pair, or kit stated for this manufacturer part number. Companion arms, joints, springs, brackets, steering parts, hardware, tools, and accessories are included only when expressly listed.
What should be checked during installation?
Verify every mounting point, joint orientation, thread engagement, axle position, steering and brake-line clearance, fastener grade, torque value, and alignment requirement. Recheck adjustment and fastener torque after initial use.
Installation Instructions
Follow the current RockJock instructions for manufacturer part number CE-9300. Support the vehicle safely, test-fit every component, verify orientation and clearances, use the specified hardware and torque values, complete alignment or calibration when required, and inspect every fastener and adjustment after initial use.
Lift Kits
Shop lift kits, suspension lift kits, coilover lift kits, Pro-Truck lift kits, Stage 1, Stage 2, and Stage 2R lift systems, leveling kits, front strut spacer kits, rear lift blocks, coil spring lift kits, component boxes, upper control arms, lift springs, and reservoir shocks from Eibach, Skyjacker, Zone Offroad, Tuff Country, Belltech, MaxTrac, Fabtech, Rancho, and other truck and off-road suspension manufacturers. Find complete suspension lift packages, front-only strut leveling kits, rear-only block and shackle kits, Jeep and Gladiator component boxes with ADX M2.0 aluminum monotube shocks, Rancho QuickLift loaded struts, and lift hardware sized for daily-driven trucks, weekend adventure builds, and dedicated overland platforms. A properly matched lift kit raises ride height, opens up tire and wheel clearance, corrects factory rake on trucks and SUVs, and adds the ground clearance needed for larger tires and off-road use. This collection covers everything from 1.5-inch front s...
View Lift Kits Products
Suspension
Suspension parts and complete kits for cars, trucks, SUVs, Jeeps, and off-road builds are stocked at Black Ops Auto Works. Shop coilovers, lowering springs, lift kits, leveling kits, shocks and struts, sway bars, control arms, tie rods, ball joints, bushings, chassis bracing, alignment hardware, air suspension, and complete stage kits from Bilstein, KW, Ohlins, Fox, KING, ICON, BC Racing, Silvers, Eibach, H&R, Swift Springs, Whiteline, Energy Suspension, Moog, SPC Performance, Rough Country, ReadyLIFT, BDS, Skyjacker, Air Lift, Firestone, and Black Ops Auto Works. Start with a matched shock and spring package or a full coilover kit, then layer in sway bars, chassis bracing, and camber adjustment hardware. Every part is filterable by year, make, model, trim, and drivetrain to confirm fitment before ordering. What This Category Covers Suspension is the highest-leverage handling upgrade on any vehicle. A properly matched shock, spring, and sway bar package produces measurable i...
View Suspension Products