Fishbone Offroad Bumpers, Armor & Racks

Shop Fishbone Offroad bumpers, body armor, fenders, rock sliders, bed racks, storage systems, recovery accessories, lighting mounts, and suspension components at Black Ops Auto Works. Fishbone Offroad develops vehicle-specific equipment for Jeep Wrangler, Jeep Gladiator, Jeep Cherokee, Ford Bronco, Ford and Ram trucks, Toyota Tacoma, Toyota Tundra, and other supported off-road platforms.

This collection includes complete vehicle upgrades, model-specific mounting components, and universal accessories. Select every product by its exact application and manufacturer part number. Similar vehicles can have different frames, body configurations, factory bumpers, sensors, cameras, suspension systems, and mounting locations.

Fishbone Offroad Front and Rear Bumpers

Fishbone Offroad bumper options include full-width, mid-width, stubby, winch-capable, and application-specific front and rear designs. Product families such as Piranha, Barracuda, Mako, and Steelhead serve different vehicles and installation goals. Available coverage includes select Jeep CJ, YJ, TJ, JK, JL, and Gladiator models, along with Toyota Tacoma, Ram 1500, and Ford Bronco applications.

Before choosing a bumper, confirm the exact model year, body style, trim, factory bumper, tow hooks, hitch equipment, skid plates, and exhaust clearance. Parking sensors, forward-facing cameras, fog lights, adaptive cruise control, and other driver-assistance equipment may require relocation, replacement brackets, or removal. Compatibility varies by bumper.

Winch and Recovery Components

Selected Fishbone bumpers and mounting plates are designed to accept compatible winches or recovery components. This collection also includes D-ring mounts, shackles, hawse-fairlead license-plate mounts, winch-line hooks, and related accessories.

A winch-ready bumper does not mean that the winch, fairlead, shackles, wiring, recovery rope, or installation hardware is included. Verify the bumper’s winch opening, mounting pattern, rated capacity, fairlead style, and clearance. Recovery equipment should be selected and used according to the ratings of every component in the recovery system.

Fenders, Inner Fenders, and Body Armor

Fishbone Offroad offers tube fenders, inner-fender liners, rocker protection, Scale Armor, skid plates, and wheel-well components for compatible Jeep platforms. Materials and finishes vary by product. The collection includes both steel and aluminum parts, along with painted, raw, textured-black, and other application-dependent finishes.

Front and rear fenders may be sold separately, in axle-specific pairs, or as a complete set. Confirm the quantity and included positions before ordering. Installation can affect factory marker lights, turn signals, liners, flare extensions, wiring, and tire clearance. Review the individual instructions before removing factory body components.

Rock Sliders, Side Steps, and Tube Doors

Rock sliders and side steps provide different balances of rocker-panel coverage, entry assistance, and ground clearance. The available Fishbone collection includes steel rock sliders, step sliders, door-mounted steps, foot pegs, tube doors, grab handles, and related Jeep accessories.

Do not use a side step or rock slider as a lifting or recovery point unless the manufacturer specifically approves that use. Confirm two-door or four-door compatibility, mounting locations, body clearance, and whether drilling or modification is required. Tube doors and foot pegs can change occupant protection and may be subject to local road-use requirements.

Bed Racks, Chase Racks, and Cargo Storage

Fishbone Offroad cargo products include bed racks, chase racks, MOLLE panels, tie-down systems, storage bins, interior racks, tailgate tables, flashlight mounts, fire-extinguisher holders, jack mounts, and RotopaX-compatible mounting components.

Rack compatibility can depend on the truck generation, bed length, factory rail system, tonneau-cover mounting position, and existing bed accessories. Compare the exact static and dynamic load limits stated for the selected product. Secure cargo using properly rated straps and mounting points, then inspect the rack and hardware regularly.

Lighting and Accessory Mounts

The collection includes hood-light brackets, turn-signal and side-marker kits, roll-bar mounts, bumper light provisions, and other accessory mounting solutions. Lights are not automatically included with a bracket or bumper. Confirm the light size, mounting pattern, electrical requirements, beam purpose, wiring components, and applicable road-use regulations.

Leveling Kits and Suspension Parts

Selected Fishbone Offroad products include leveling components, lift parts, shackles, shackle hangers, and steering braces. Suspension fitment depends on the complete vehicle configuration and installed equipment. A leveling amount shown in the product name does not guarantee the final measured ride height on every vehicle.

Confirm two-wheel-drive or four-wheel-drive compatibility, factory suspension, axle configuration, current ride height, wheel and tire clearance, and required alignment work. After installation, inspect steering, brake-line, ABS-wire, and suspension clearances throughout the full range of motion.

Before You Order Fishbone Offroad Parts

• Confirm the exact year, make, model, trim, body style, and drivetrain.
• Check factory bumpers, sensors, cameras, lights, hitches, and skid plates.
• Verify two-door, four-door, cab, bed-length, and wheelbase requirements.
• Review all included components and required separately sold accessories.
• Confirm whether drilling, cutting, trimming, painting, or wiring is required.
• Check material, finish, mounting points, dimensions, and load limits.
• Use the exact Fishbone Offroad part number to confirm compatibility.

Frequently Asked Questions

How do I confirm a Fishbone Offroad part fits my vehicle?

Match the exact year, make, model, trim, body style, drivetrain, factory equipment, and manufacturer part number. Read every application note because fitment can change within the same model generation.

Are lights, winches, and recovery gear included?

Only the components expressly identified in the individual listing are included. A bumper or bracket may provide mounting provisions while the lights, winch, fairlead, shackles, wiring, or recovery equipment remain separate purchases.

Will installation require drilling or trimming?

Some products install at factory mounting points, while others may require drilling, trimming, wiring, or changes to factory components. Review the instructions for the exact part before installation.

Will a Fishbone bumper retain my factory sensors?

Sensor compatibility varies by bumper and vehicle. Confirm parking sensors, adaptive cruise control, cameras, fog lights, and other equipment individually. Relocation hardware may be required or compatibility may be excluded.

Can I install Fishbone Offroad parts myself?

Installation difficulty varies substantially. Heavy bumpers, suspension components, recovery equipment, and parts requiring wiring or body modification are best installed by a qualified shop with suitable lifting and safety equipment.

Shop Fishbone Offroad

Build your Jeep, Bronco, Toyota, Ram, or Ford with Fishbone Offroad protection, recovery, storage, and utility equipment selected for the exact application. Browse our body armor and protection and truck bed racks for additional off-road products. Confirm all fitment and included components on the individual product page before purchase.