Performance Pedals, Aluminum Race Pedal Sets for Cars

Pedal Assemblies and Balance Bars

A pedal assembly positions the brake and clutch controls while a balance bar can provide a mechanical method to tune front and rear brake bias in a compatible dual master cylinder system. Wilwood floor mount, swing mount and reverse mount options support a range of custom builds.

Brake and Clutch Layout

Choose the mounting orientation, pedal ratio and master cylinder arrangement that match the chassis and brake system. Brake pedals and clutch pedals need sufficient travel and safe, secure mounting.

Drive By Wire and Swap Pedals

Modern engine swaps can require a compatible electronic accelerator pedal. Rywire pedal kits support selected Honda applications that use drive by wire engine management.

Manual Transmission Controls

Clutch pedals, clevises and pedal hardware are key fitment items for manual transmission conversions. Confirm the pedal box, master cylinder, linkage and firewall design before purchase.

Track Focused Driver Interface

Race pedal sets, foot rests and adjustable brake bias hardware let the driver create a repeatable driving position. Proper pedal spacing and shoe clearance matter as much as appearance.

Materials and Grip

Aluminum pedal parts resist corrosion and can offer a positive foot surface. Consider whether the vehicle sees wet street use, track work or off road riding when selecting pedal surfaces.

Top Performance Pedals Brands and Platforms

• Wilwood. Adjustable brake and clutch pedal assemblies, balance bars and hardware.
• OMP. Motorsport foot rests and interior driver controls.
• Rywire. Drive by wire pedal kits for selected Honda swaps.
• Kuryakyn. Motorcycle brake pedal accessories.
• MOMO. Performance pedal covers and driver interface accessories.
• Sparco. Motorsport focused pedal and interior equipment.

How to Choose the Correct Performance Pedals Part

• Confirm whether the vehicle uses a street pedal, race pedal box or drive by wire accelerator.
• Match floor mount, swing mount or reverse mount geometry to the chassis.
• Check pedal ratio against the master cylinder and brake system design.
• Verify brake and clutch pedal placement for the driver seating position.
• Confirm a drive by wire pedal matches the intended electronic throttle system.
• Review clevis, linkage and master cylinder compatibility for clutch setups.
• Measure available firewall and floor space before installing a pedal box.
• Choose a pedal surface that gives secure wet and dry shoe grip.
• Verify clearance around steering columns, wiring and interior trim.
• Use the vehicle filters and product fitment details before ordering.

Common Questions

What is a performance pedal assembly?

A performance pedal assembly is a brake, clutch or throttle control designed for a specific chassis or custom build.

What does pedal ratio mean?

Pedal ratio affects the leverage applied to the master cylinder or linkage and should match the brake system design.

Can I use a race pedal box on the street?

Some applications can work on the street, but safe mounting, pedal travel and brake system compatibility are essential.

What is a balance bar?

A balance bar is a mechanical component used with compatible dual master cylinder systems to adjust brake bias.

Do I need a special pedal for drive by wire?

Yes. Electronic throttle systems require a pedal compatible with the chosen engine management and wiring.

Are these pedals only for cars?

Most products support automotive builds, while selected Kuryakyn parts are made for motorcycle applications.

How do I choose a clutch pedal?

Match the clutch pedal to the pedal box, linkage, master cylinder and intended transmission setup.

What is a floor mount pedal?

A floor mount pedal assembly is secured low in the footwell rather than suspended from the firewall area.

Should I change the brake pedal without other brake parts?

Brake system changes should be planned as a complete, compatible system with attention to safety and installation.

Where can I find pedal covers and interior parts?

Use the related collection links below to shop pedal covers, interior accessories and driver focused parts.

Why Buy Performance Pedals from Black Ops Auto Works

Black Ops Auto Works stocks 38 Performance Pedals SKUs with real fitment data, competitive pricing and support from staff who build these vehicles themselves. Products are filterable by year, make, model, trim, engine and drivetrain to help confirm the correct application before ordering.

For focused shopping, browse our Pedal Covers, Interior Accessories, Shift Knobs, Steering Wheels, Interior Trim, MOMO.