One-Handed Bed Access With A Third Of The Lift Effort
The BAKFlip MX4 EZ-Lift brings BAK Industries' best-selling hard folding tonneau cover design to the 2017 and newer Honda Ridgeline, now with a redesigned lift system that cuts the fold-up effort to roughly a third of standard hard folding covers. Aircraft-grade aluminum panels over a high-density polymer core deliver serious security and weather protection without adding unnecessary weight to your bed access routine.
Key Features
- EZ-Lift system reduces lift force to about 10.5 lbs versus nearly 30 lbs for standard hard folding covers
- Extra-large paddle handle auto-unlatches as you lift, no separate release step required
- Patented auto-latch system locks the panels the moment the cover closes
- Self-unlatching middle panels eliminate manual cable pulls
- Premium-grade, multi-layer aluminum panels over a high-density polymer core
- Folds fully to the cab for 100 percent bed access without removal
- Does not block the third brake light or integrated bed camera in any position
- Rated for 400 lbs of evenly distributed weight
- Textured matte black finish across all panels and hardware
- Bolt-on installation with tight-fit clamps, no drilling required for most applications
- Assembled in the USA
Fitment
| Year Range |
Make |
Model |
Trim |
| 2017-2026 |
Honda |
Ridgeline |
|
Fits Honda Ridgeline models with the 5 ft 4 in composite bed. Confirm bed length before ordering, as this cover is not compatible with modified or non-factory bed configurations.
Specifications
| Detail |
Value |
| Manufacturer Part Number |
450602 |
| Brand |
BAK Industries |
| Product Line |
BAKFlip MX4 EZ-Lift |
| Cover Type |
Hard Folding |
| Material |
Aluminum panels with high-density polymer core |
| Finish |
Matte Black |
| Weight Capacity |
400 lbs evenly distributed |
| Installation Time |
Approximately 30 minutes, no drilling required for most applications |
| Country of Assembly |
United States |
| Warranty |
5-Year Limited Warranty |
What's Included
- BAKFlip MX4 EZ-Lift tonneau cover panels
- Tight-fit mounting clamps and rail hardware
- Paddle latch and auto-latch assembly, pre-installed
- Manufacturer installation instructions
About BAK Industries
BAK Industries is a RealTruck brand and one of the longest-running names in hard folding truck bed covers. The BAKFlip MX4 lineup is engineered and assembled in the United States, and the EZ-Lift version was developed specifically to reduce the physical effort of opening a hard folding cover while keeping the same aluminum panel strength and weather sealing the MX4 series is known for.
Related Parts on Our Site
FAQ
What is the 450602?
The 450602 is the BAK Industries BAKFlip MX4 EZ-Lift hard folding tonneau cover built for the 2017 and newer Honda Ridgeline with the 5 ft 4 in bed. It uses aluminum panels over a polymer core and an EZ-Lift latch system that reduces lift effort compared to standard hard folding covers.
Will the BAKFlip MX4 EZ-Lift fit my Honda Ridgeline?
Yes, the 450602 is built specifically for 2017 through 2026 Honda Ridgeline trucks with the 5 ft 4 in composite bed. Double check your bed length before ordering since Ridgeline is only offered with one bed size.
Does the EZ-Lift cover block the third brake light or backup camera?
No. The panel design and fold geometry keep the third brake light and any integrated bed camera fully visible in every cover position, closed, folded, or fully open.
How much weight can the cover hold when closed?
The BAKFlip MX4 EZ-Lift supports up to 400 lbs of evenly distributed weight when closed, letting you use it as a secure platform for lightweight cargo.
Does installation require drilling into the truck bed?
No drilling is required for most Ridgeline applications. The cover mounts using tight-fit clamps that attach to the factory bed rails, and most installs are complete in about 30 minutes with basic hand tools.
How is the EZ-Lift version different from the standard BAKFlip MX4?
The EZ-Lift version uses a redesigned latch and spring-assist system that cuts the force needed to fold the cover open to roughly a third of the effort required by the standard MX4, while keeping the same aluminum panel construction and weather sealing.
Is this tonneau cover made in the USA?
Yes, the BAKFlip MX4 EZ-Lift is assembled in the United States using globally sourced materials.
What is the warranty on the BAKFlip MX4 EZ-Lift?
BAK Industries backs the MX4 EZ-Lift with a 5-year limited warranty covering defects in material and workmanship from the original date of purchase.
Can I still open and close my tailgate with the cover installed?
Yes, the integrated tailgate seal allows normal tailgate operation with the cover in either the open or closed position.
Install Instructions
- Remove factory bed rail caps if present and set aside included hardware
- Position the rear panel section and attach the tight-fit clamps to the bed rail at the tailgate end
- Work forward, aligning each additional panel section and securing the rail clamps at each mounting point
- Install the front panel section against the front bulkhead of the bed and secure remaining clamps
- Adjust clamp tension evenly along both rails so panels sit flush and seals compress uniformly
- Test the paddle latch and auto-latch function by cycling the cover through open, folded, and closed positions
- Confirm the tailgate opens and closes normally with the cover in both open and closed positions
Prop 65 Warning
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer or reproductive harm. For more information, visit www.P65Warnings.ca.gov.
