One-Hand Bed Access Built For The Newest Ranger
The BAKFlip MX4 EZ-Lift extends the assisted-lift tonneau platform to the 2026 Ford Ranger. Part number 450352 fits the 5 foot bed and uses a spring assisted panel system that drops the lift effort from nearly 30 lbs to just 10.5 lbs, so the cover opens with one hand and closes with a confirmed auto-latch.
Key Features
- EZ-Lift assisted folding system reduces lift force to 10.5 lbs versus nearly 30 lbs on standard hard folding covers
- Extra-large paddle handle auto-unlatches as you lift, no second step required
- Patented auto-latch system locks the moment the cover closes
- Self-unlatching middle panels remove the need to pull manual release cables
- Premium-grade, multi-layer aluminum panels over a high-density polymer core
- Advanced edge-to-edge seals and precision-fit clamps keep cargo dry in rain and snow
- Folds fully to the cab for 100 percent bed access without any part removal
- Does not block the third brake light or bed-mounted camera in any folded position
- 400 lb evenly distributed weight capacity
- Textured matte black finish across every panel
- Bolt-on clamp installation, no drilling, typical install time under 30 minutes
- Assembled in the USA
Fitment
| Year Range |
Make |
Model |
Trim |
| 2026 |
Ford |
Ranger |
XL |
| 2026 |
Ford |
Ranger |
XLT |
| 2026 |
Ford |
Ranger |
Lariat |
| 2026 |
Ford |
Ranger |
Raptor |
Fits the 2026 Ford Ranger equipped with the 5 foot bed only. Verify bed length before ordering, since Ranger is also offered with a longer bed that requires a different part number.
Specifications
| Detail |
Value |
| MPN |
450352 |
| UPC |
192631076100 |
| Brand |
BAK Industries |
| Series |
BAKFlip MX4 EZ-Lift |
| Material |
Aluminum panels, high-density polymer core |
| Finish |
Matte Black |
| Weight Capacity |
400 lbs, evenly distributed |
| Installation |
Clamp-on, no drilling required |
| Country of Assembly |
USA |
| Warranty |
5-Year Limited |
What's Included
- BAKFlip MX4 EZ-Lift tonneau cover, part number 450352
- Side rail clamp hardware kit
- Bulkhead and tailgate seals
- Prop rods for open-bed driving position
- Printed installation instructions
About BAK Industries
BAK Industries has built hard folding tonneau covers for pickup trucks for over two decades and is now part of the RealTruck family of brands. The BAKFlip MX4 line is the best-selling hard folding tonneau cover in the country, known for its aluminum panel construction, auto-latching side rails, and low-profile fit against the bed rails. The EZ-Lift version builds on that platform with an assisted opening system designed to make daily use easier for one person.
Related Parts on Our Site
FAQ
What is the 450352?The 450352 is the BAK Industries BAKFlip MX4 EZ-Lift hard folding tonneau cover built for the 2026 Ford Ranger with a 5 foot bed. It uses an assisted lift system that cuts the effort needed to fold the cover by roughly two thirds compared to standard hard folding covers.
Does this tonneau cover fit earlier Ranger model years?No. This tonneau cover is built specifically for the 2026 Ranger. Earlier Ranger model years use different BAK part numbers matched to their bed dimensions and rail design.
Does this tonneau cover fit the Ranger Raptor?Yes. It fits the 2026 Ranger Raptor along with XL, XLT, and Lariat trims equipped with the 5 foot bed.
How much force does it take to open the EZ-Lift cover?The EZ-Lift system requires about 10.5 lbs of lift force, compared to nearly 30 lbs on many standard hard folding tonneau covers, so it can be opened with one hand.
Does this cover require drilling to install?No. The BAKFlip MX4 EZ-Lift uses a clamp-on mounting system that attaches to the bed rails without drilling into the truck bed.
Will the cover block my third brake light or backup camera?No. The panel design keeps the third brake light and any bed-mounted camera fully visible in every folded position.
What warranty comes with this tonneau cover?BAK Industries backs the BAKFlip MX4 EZ-Lift with a 5-year limited warranty against defects in materials and workmanship.
Can I still access the truck bed with the cover folded up?Yes. The cover folds completely forward against the cab, giving full, unobstructed access to the bed for hauling taller cargo.
Install Instructions
- Clean the bed rails and bulkhead surface with rubbing alcohol before installation.
- Attach the bulkhead seal across the front cap of the bed.
- Position the side rail clamps into the bed rail channel on each side and hand-tighten.
- Set the cover on top of the rails, centering it side to side.
- Fold each panel back toward the tailgate one at a time, allowing the auto-latch system to engage.
- Tighten the cover retaining clamps underneath the rails on both sides.
- Attach the rubber bumpers to the panel that folds against the cab.
- Test the tailgate seal and confirm the tailgate opens and closes normally with the cover in place.
Prop 65 Warning
WARNING: This product can expose you to chemicals including lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
