Click to zoom in
The Performance Exhaust Built Specifically for the 2014-2015 Chevrolet Camaro 1LE Track Package
The Thermal R&D B1207-C1209 is a 3-inch cat-back exhaust system engineered for the 2014-2015 Chevrolet Camaro 1LE. Built with T304 stainless steel mill-finish tubing, brushed resonators and mufflers, and quad polished angle tips, the B1207-C1209 uses factory valve integration so you retain the OEM active exhaust button. True Helmholtz Technology cancels highway drone while delivering an aggressive, deep tone on throttle. Made in Lancaster, California, the B1207-C1209 is a direct bolt-on replacement that uses all OEM hanger locations with no cutting or welding required. Backed by a Limited Lifetime Warranty to the original vehicle owner, the B1207-C1209 is the definitive exhaust upgrade for any 2014 or 2015 Camaro 1LE build.
Key Features
- 3-Inch T304 Stainless Steel Tubing - Larger diameter than stock for improved exhaust flow and deeper tone on the 1LE
- Factory Valve Integration - Works with the OEM active exhaust switch for quiet mode and aggressive mode
- True Helmholtz Technology - Cancels highway drone while preserving aggressive acceleration sound
- Quad Polished Angle Tips - Four polished stainless tips sized to fit the 1LE rear valance cleanly
- Mill Finish Tubing and Resonators - Clean, factory-plus appearance with brushed muffler accents
- All OEM Hanger Locations Used - True bolt-on install, no drilling or welding required
- Made in Lancaster, California, USA - Thermal R&D manufactures every B1207-C1209 in-house
| Specification | Detail |
|---|---|
| Manufacturer Part Number | B1207-C1209 |
| UPC | Contact us for UPC |
| Brand | Thermal R&D (Thermal Research and Development) |
| System Type | Cat-Back Exhaust |
| Pipe Diameter | 3 inch throughout |
| Material | T304 stainless steel, mandrel bent |
| Finish | Mill tubing and resonators, brushed mufflers, polished quad tips |
| Tip Style | Quad angle cut, polished |
| Valve Integration | Compatible with OEM active exhaust valves |
| Installation | Bolt-on, uses OEM hangers, no cutting or welding |
| Country of Manufacture | USA (Lancaster, California) |
| Warranty | Limited Lifetime to original vehicle owner (non-transferable) |
| Note | Does not cover commercial or racing use |
What's Included
- Complete 3-inch cat-back exhaust system including mid-pipe, resonators, mufflers, and quad polished tips
- All mounting clamps, hardware, and installation instructions
- Thermal R&D B1207-C1209 is packaged in official Thermal R&D retail boxing
Fitment
| Year Range | Make | Model | Trim | Notes |
|---|---|---|---|---|
| 2014-2015 | Chevrolet | Camaro | 1LE | B1207-C1209 direct fit; requires OEM active exhaust system; not for non-1LE models |
Why Choose the Thermal R&D B1207-C1209 Over Competitors
- The B1207-C1209 is the only bolt-on 3-inch cat-back designed specifically around the Camaro 1LE chassis and valve system
- True Helmholtz drone elimination is engineered in, not added as an afterthought
- All Thermal R&D products including the B1207-C1209 are manufactured in Lancaster, California
- Limited Lifetime Warranty to the original vehicle owner provides long-term coverage
Frequently Asked Questions
-
Q: Does the B1207-C1209 fit both 2014 and 2015 Chevrolet Camaro 1LE models?
A: Yes. The B1207-C1209 is a direct fit for both 2014 and 2015 Camaro 1LE equipped vehicles. -
Q: Does the B1207-C1209 work with the factory active exhaust valves on the Camaro 1LE?
A: Yes. The B1207-C1209 integrates with the OEM active exhaust valve system, preserving quiet mode and aggressive mode. -
Q: Will the B1207-C1209 fit a 2014 Camaro SS that does not have the 1LE track package?
A: No. The B1207-C1209 is specifically designed for 1LE equipped models. For non-1LE Camaros, see the B1207-C1208. -
Q: Does this exhaust drone on the highway?
A: No. Thermal R&D uses True Helmholtz Technology to cancel the resonant frequencies responsible for highway drone. -
Q: Are the quad tips included with the B1207-C1209?
A: Yes. Quad polished angle-cut tips are included as part of the complete B1207-C1209 system. -
Q: How long does installation take?
A: Most installers complete the B1207-C1209 in one to two hours using basic hand tools and a lift. -
Q: Where is the Thermal R&D B1207-C1209 manufactured?
A: All Thermal R&D exhausts including the B1207-C1209 are made in Lancaster, California, USA. -
Q: What warranty covers the B1207-C1209?
A: Thermal R&D provides a Limited Lifetime Warranty to the original vehicle owner. The warranty is non-transferable and does not cover commercial or racing use. -
Q: Will I need to cut or weld anything to install the B1207-C1209?
A: No. The B1207-C1209 uses all OEM hanger locations and includes all hardware. No cutting or welding is required.
Installation Instructions
Apply penetrating fluid to all factory exhaust clamps and isolator bushings before starting. Disconnect the OEM cat-back at the catalytic converter outlet flanges and work rearward, removing the system in sections as needed. Install the B1207-C1209 mid-pipe first, mating at the cat outlets and leaving clamps loose. Route the resonators and muffler section onto the OEM hanger rods and hand-tighten all connections. Adjust tip position for symmetry within the 1LE rear valance cutouts before torquing all clamps. Start the vehicle and inspect all joints for exhaust leaks. No cutting or welding is required at any step of the B1207-C1209 installation.
WARNING: This product can expose you to chemicals including nickel compounds, which are known to the State of California to cause cancer and reproductive harm. For more information, go to www.p65warnings.ca.gov.
Catback
Shop catback exhaust systems at Black Ops Auto Works for cat-back exhaust kits, performance exhaust systems, stainless steel exhausts, titanium exhausts, dual rear exit exhausts, track exhausts, touring exhausts, axle-back exhausts, and street performance exhaust upgrades. This collection is built for drivers who want deeper sound, improved exhaust flow, better throttle response, aggressive rear-end styling, and vehicle-specific bolt-on fitment. Use this Catback collection to choose the right exhaust system by vehicle platform, brand, material, sound level, tip finish, and driving goal. A catback exhaust can help improve sound, reduce exhaust restriction, support performance upgrades, and give your car, truck, SUV, Jeep, or performance build a cleaner, more aggressive look. Shop Catback Exhaust Systems by Brand Black Ops Auto Works carries catback exhaust systems from trusted performance brands including Borla, CORSA Performance, MagnaFlow, MBRP, AWE Tuning, Invidia, Solo Performanc...
View Catback Products
Chevrolet Camaro Parts & Accessories
Shop Chevrolet Camaro parts and accessories at Black Ops Auto Works for premium aftermarket performance parts, cold air intakes, headers, exhaust systems, carbon fiber body parts, brake upgrades, suspension components, clutch kits, fuel system parts, catch cans, wheels, and styling accessories built for the Chevrolet Camaro platform. Whether you drive a Camaro SS, Camaro ZL1, Camaro LT1, Camaro RS, or a classic F-Body Camaro, this collection is built for enthusiasts who want more power, better handling, improved braking, sharper throttle response, and aggressive styling. Whether you are building a street car, drag car, track car, or daily driven Camaro, our catalog includes trusted upgrades designed to improve horsepower, sound, suspension response, braking confidence, and overall appearance. Shop Chevrolet Camaro Performance Parts by Category Browse Chevrolet Camaro aftermarket parts across popular upgrade categories, including: Chevrolet Camaro cold air intakes and intake parts C...
View Chevrolet Camaro Parts & Accessories Products
Exhaust Systems
Black Ops Auto Works carries one of the largest selections of performance exhaust systems available online, with 7,700+ products covering cat-back exhausts, axle-back exhausts, turbo-back systems, downpipes, headers, mid-pipes, X-pipes, H-pipes, mufflers, resonators, catalytic converters, exhaust tips, and every component in between. Whether you're building a street car, a daily driver, a diesel truck, or a track build, the right exhaust upgrade is here. Shop by Exhaust System Type Cat-Back Exhaust Systems: The most popular performance exhaust upgrade. Replaces everything from the catalytic converter back for improved sound, better flow, and premium tip styling. Available in single exit, dual exit, and quad exit configurations. Axle-Back Exhaust Systems: A simpler bolt-on that replaces the rear section from the axle back. Best for drivers who want an improved exhaust note and cleaner tip appearance without a full system swap. Headers and Manifolds: Long tube headers and shorty h...
View Exhaust Systems Products
Thermal R&D
Exhaust Systems & Performance Exhaust Parts Shop Thermal R&D exhaust systems at Black Ops Auto Works. We carry premium Thermal R&D cat-back exhaust systems, performance mufflers, exhaust tips, and bolt-on exhaust kits engineered for improved exhaust flow, stronger sound, and reliable performance. Whether you are searching for a Thermal R&D Mustang exhaust, F-150 cat-back exhaust, RAM 1500 exhaust system, Ford Bronco exhaust, Honda Civic exhaust, or Acura Integra exhaust, this collection includes high-performance exhaust upgrades for trucks, muscle cars, and imports. Thermal R&D Exhaust Systems for Trucks, Muscle Cars & Imports Browse Thermal R&D performance exhaust systems for popular applications, including: Ford F-150 exhaust systems Ford Bronco exhaust systems Ford Mustang GT exhaust systems Ford Maverick EcoBoost exhaust RAM 1500 cat-back exhaust systems Honda Civic Si exhaust systems Honda Accord Sport exhaust systems Honda Civic Type R exhaust syst...
View Thermal R&D Products