Click to zoom in
SKU: CPS-OBI-HC-17-22
Hellcat 4.5" Open Box Cola Air intake for the Air Grabber Hood.
Our Precision intake is packed with quality, visuals & dyno-proven results. We took our R&D to the literal drawing board and looked to maximize every aspect of the stock intake. We took our scans and used every cm of available space to create a stunning and purposeful airbox that looks great and outperforms the stock & other aftermarket intakes without reducing flow. Then we added a 4.5" mandrel bent intake tube for as little restriction as possible. Then we styled it with a laser-cut Cornerstone Performance Solutions logo and powder-coated it to give a long-lasting and immaculate finish. This intake is not slapped together by any means, this is the result of months of R&D & design, Enjoy!
Features & Benefits:
- 4.5" mandrel bent intake tube
- NO TUNING REQUIRED
- No Cutting or Modifications for Installation
- Uses factory mounting locations
- 7" Oiled filter (30% greater surface area than stock)
- Retains the factory fresh-air (Ram Air) inlet from the front grille/headlight
- Powder-Coated with Prismatic Powders premium powder coat
- 100% Designed, Fabricated & Finished in the U.S.A.
- Average installation time of 30 minutes
- 19+ HP Gain over stock (Dyno Proven)
- 10+ FTLB Gain over stock (Dyno Proven)
- This is one of the only intakes on the market to have a direct seal to the Factory Air Grabber Hood.
- Kit includes hardware for both PCV system configurations
- Laser-cut closed box enclosures
- High-Quality silicone boot & Hardware
- Limited Lifetime Warranty on all hard parts
What is included in the Open Box Cold Air Intake for the 17-22 Hellcat from Cornerstone?
- 1x - Powder-Coated intake tube w/ provisions
- 1x - Custom 7" Oiled Filter
- 1x - Assembled & Powder-Coated Intake Box w/ Open lid
- 1x - High-Quality Reinforced 4-Ply Silicone boot
- 1x - Short PCV hose
- 1x - Long PCV hose
- 2x - 4.5" Stainless Steel T-Bolt Clamps
- 2x - Stainless Steel Worm Gear Clamps for PCV hose
Dyno Test Results for our Open Box Cold Air Intake for the 2017-2022 Hellcat
All testing was performed on a stock 2020 Dodge Hellcat Charger Widebody with zero other modifications. Testing was performed in a climate-controlled facility on the same day with the only changes being adding our aftermarket intake to the car. Stock results- 4 Runs back to back yielded us a maximum of 632WHP and 674FTLBS Results with our intake added
4 Runs back to back yielded us a maximum of 651WHP and 684FTLBS. A 19WHP & 10FTLBS GAIN!!!
We noticed during our testing that the stock intake run after run got heat-soaked really bad and took quite some time to recover back to our original starting point which was 110 degrees. We tried everything we could to try and heat soak our intake run after run to try and replicate the heat gains we saw with the stock airbox and couldn't.
NOTE: May require a custom tune to receive maximum performance gains.
Air Intake Systems
Air Intake Systems, Cold Air Intakes & Performance Intake Parts Shop premium air intake systems, cold air intakes, short ram intakes, air boxes, intake components, intake elbows, mass air flow sensors, scoops, snorkels, recharge kits, silicone couplers, and intake hoses at Black Ops Auto Works. This collection is built for enthusiasts looking to improve airflow, throttle response, induction sound, horsepower potential, and under-hood performance across cars, trucks, SUVs, Jeeps, muscle cars, off-road builds, and supercharged HEMI platforms. Whether you are upgrading a daily driver, Dodge Charger, Dodge Challenger, Dodge Durango, Jeep Grand Cherokee, Jeep Trackhawk, Ram TRX, Ram RHO, Toyota Tundra, Chevy Silverado, Chevrolet Camaro, Corvette, BMW, Cadillac CTS-V, Honda, Hyundai, Infiniti, or a custom performance build, our Air Intake Systems collection includes parts designed for fitment, durability, and real-world performance. Air Intake Systems from Top Brands Shop trusted air ...
View Air Intake Systems Products
Cold Air Intakes
Shop All Air Intakes & Performance Intake Kits Premium cold air intakes, performance air intake systems, short ram intakes, carbon fiber intakes, sealed air box intakes, HEMI intakes, Hellcat intakes, Trackhawk intakes, TRX intakes, and vehicle-specific intake upgrades. This collection is built for enthusiasts looking to improve airflow, throttle response, induction sound, horsepower potential, and under-hood styling across street cars, muscle cars, trucks, SUVs, Jeeps, off-road builds, and diesel applications. Cold Air Intakes from Top Brands Shop trusted cold air intake brands including Legmaker Intakes, aFe Power, JLT Performance, K&N Engineering, Airaid, Corsa Performance, Injen Technology, Spectre Performance, and Wehrli Custom Fabrication. These brands produce cold air intakes, short ram intakes, carbon fiber intake systems, sealed intake kits, performance air filters, intake tubes, and vehicle-specific air intake upgrades for domestic, import, truck, Jeep, SUV, diesel...
View Cold Air Intakes Products
CornerStone Performance
Shop CornerStone Performance exhaust systems, long tube headers, mid pipes, cat-back exhausts, axle-back exhausts, muffler deletes, cold air intakes, billet valve covers, and performance parts at Black Ops Auto Works. CornerStone Performance builds high-quality USA-made performance upgrades for modern muscle cars, HEMI platforms, Hellcat builds, RAM TRX trucks, Jeep Trackhawk, Jeep SRT, Dodge Charger, Dodge Challenger, Chrysler 300, and Chevrolet Corvette applications. Whether you are building a street car, drag car, high-horsepower HEMI, supercharged Hellcat, RAM TRX truck, Jeep Trackhawk, or C7 Corvette, Black Ops Auto Works carries CornerStone Performance parts designed for sound, airflow, exhaust flow, durability, and real performance gains. Shop CornerStone Performance Parts by Category Browse CornerStone Performance upgrades across popular performance categories, including: CornerStone Performance exhaust systems CornerStone Performance long tube headers CornerStone Performan...
View CornerStone Performance Products