-10%
Click to zoom in
Add low-profile security without sacrificing bed access
LOMAX G3050089 is the black urethane aluminum hard folding cover sized for Access 2022+ Toyota Tundra 6ft 6in Bed. Its rigid panels sit less than half an inch above the bed and lock automatically as the cover is unfolded.
Key Features
- Exact LOMAX G3050089 vehicle-specific configuration
- Extruded aluminum panels with black urethane finish
- Automatic ten-point locking system
- Dual release allows operation from either side
- Continuous water-shedding seals without drain tubes
- No-drill Tight Bite clamp installation
- Supports up to 400 lb of evenly distributed weight
- 3-year limited manufacturer warranty
- RigidLink system secures the cover vertically behind the cab for full bed access
Fitment
| Years | Make | Model | Required configuration |
|---|---|---|---|
| 2022 - 2026 | Toyota | Tundra | LOMAX G3050089. Exact manufacturer selector configuration: Toyota Tundra, 6ft 6in Bed. Match the actual bed and factory rail system; trim name alone does not establish fitment. This is the standard-bed selector variant; use the manufacturer selector to distinguish deck-rail-specific part numbers. Manufacturer requirements: Cover may restrict the use of box rail system. See Special Instructions to learn more . |
Specifications
| Detail | Value |
|---|---|
| Manufacturer Part Number | G3050089 |
| Series | LOMAX Stance |
| Cover Type | Hard tri-fold tonneau cover |
| Bed Length | 6 ft 6 in |
| Panel Material | Extruded aluminum |
| Finish | Black urethane |
| Installed Profile | Less than 1/2 inch above the bed |
| Distributed Load Rating | 400 lb |
| Installation | Vehicle-specific no-drill clamps |
| Warranty | 3-year limited manufacturer warranty |
What's Included
- One LOMAX G3050089 hard folding cover
- Application-specific rails, Tight Bite clamps, seals, and hardware
- Installation instructions
- Truck, cargo, rack, toolbox, and unrelated accessories are not included
About Access
Agri-Cover manufactures LOMAX hard covers and ACCESS roll-up covers in North Dakota. LOMAX combines low-profile aluminum panels, automatic locking, and vehicle-specific clamp-on rails for secure daily bed protection.
Related Parts
- LOMAX replacement seals specified for the exact cover
- Tailgate perimeter seal
- Truck-bed lighting selected for the same vehicle and rail configuration
FAQ
What is the G3050089?It is the vehicle-specific LOMAX LOMAX Stance black urethane aluminum hard folding tonneau cover described here.
What bed length is required?This configuration is sized for 6 ft 6 in; verify the measured bed and factory rail equipment before ordering.
Is this cover universal?No. The panel dimensions, rails, clamps, and seals are specific to the applications in the fitment table.
How much weight can the closed cover support?LOMAX rates the panels for up to 400 pounds of evenly distributed weight.
How does the cover lock?Reinforced automatic latches engage as each panel is unfolded, and the release cord can be reached from either side of the bed.
Does installation require drilling?No. The vehicle-specific rails use the supplied Tight Bite clamps.
What is included?The hard folding cover, application rails, clamps, seals, and installation instructions are included. The truck and optional accessories are not.
What warranty applies?LOMAX lists a three-year limited warranty, subject to the current published terms and exclusions.
Installation Instructions
- Confirm the truck, bed length, bed style, and factory rail equipment match LOMAX G3050089.
- Read the current LOMAX instructions and identify every rail, clamp, seal, and panel before assembly.
- Position the vehicle-specific rails evenly and tighten the supplied clamps in the documented sequence.
- Attach the cover, unfold each panel, and verify every automatic latch engages the rail correctly.
- Check tailgate operation, panel clearance, seals, and the folded or vertical storage position before driving.
California Proposition 65 Warning: Cancer and reproductive harm. See www.P65Warnings.ca.gov.
Check the LOMAX manufacturer vehicle and bed selector. Match the exact part number and factory rail configuration.
Access
Shop ACCESS tonneau covers and truck-bed accessories by exact truck generation, measured bed length and factory bed equipment. Compare ACCESS Original, LORADO, LiteRider, VANISH and TONNOSPORT roll-up covers; LOMAX folding hard covers; ADARAC rack systems; ACI bed mats; and compatible cargo and sealing accessories. Every cover and rack is application-specific unless the product states otherwise. Match the exact part number and check notes for deck rails, RamBox, CarbonPro, bedside storage, toolboxes, stake pockets and existing cover hardware before ordering. Choose the Right ACCESS Truck-Bed Product Product family Best for Confirm before ordering ACCESS soft roll-up covers Flexible coverage with broad bed access Cover line, bed length and factory rail or storage equipment LOMAX folding hard covers Low-profile rigid-panel coverage Truck generation, bed length, finish and installed accessories ADARAC rack systems Carrying compatible loads above the bed Stake pockets, rack ser...
View Access Products
Exterior Parts & Accessories
Shop exterior parts and accessories for cars, trucks, Jeeps, and SUVs at Black Ops Auto Works. Explore carbon-fiber hoods, front lips, splitters, spoilers, diffusers, fender flares, truck steps, bed accessories, and exterior trim. Whether you are updating a performance vehicle’s appearance or adding everyday utility to a pickup, choose components matched to your exact vehicle and existing equipment. Carbon-Fiber Hoods and Body Panels Explore Black Ops Auto Works hood designs and selected replacement panels for Jeep Grand Cherokee, Dodge Charger, Dodge Durango, Chrysler 300, and other listed applications. Featured designs include Demon, Sniper, Redeye, and CFR options for supported vehicle configurations. Compare the construction, finish, mounting requirements, and supplied components on each listing. A carbon-fiber appearance does not establish that every product uses the same material or manufacturing method. Browse our Black Ops Carbon Fiber collection for focused shopping. Front ...
View Exterior Parts & Accessories Products
Toyota Tundra Parts and Accessories
Shop Toyota Tundra parts for suspension projects, brake maintenance, bed equipment and exterior accessories at Black Ops Auto Works. Compare Bilstein, ICON or OME choices, cab-specific steps and BAK bed covers. Start with your actual generation, powertrain, drivetrain, cab and bed to coordinate the complete order.Dampers, Springs and Suspension SystemsCompare Bilstein, KYB, ICON and OME suspension choices by exact generation, service position and factory configuration. Match actual drivetrain, factory suspension and current ride height before comparing an individual damper, loaded strut or complete system. A lift title stating no shocks needs the separate supported damper plan reviewed.Bed Caps, Covers and Cab AccessoriesFor Westin truck caps supplied as Box 1, include the specified companion Box 2 in the complete installation plan. BAK covers, running boards and ventvisors also distinguish bed or cab configurations. Review exact body, rail-system and supplied installation component...
View Toyota Tundra Parts and Accessories Products