-10%
Click to zoom in
Add low-profile security without sacrificing bed access
LOMAX G3010099 is the black urethane aluminum hard folding cover sized for Access 2026+ Ford Ranger 5ft Bed. Its rigid panels sit less than half an inch above the bed and lock automatically as the cover is unfolded.
Key Features
- Exact LOMAX G3010099 vehicle-specific configuration
- Extruded aluminum panels with black urethane finish
- Automatic ten-point locking system
- Dual release allows operation from either side
- Continuous water-shedding seals without drain tubes
- No-drill Tight Bite clamp installation
- Supports up to 400 lb of evenly distributed weight
- 3-year limited manufacturer warranty
- RigidLink system secures the cover vertically behind the cab for full bed access
Fitment
| Years | Make | Model | Required configuration |
|---|---|---|---|
| 2026 | Ford | Ranger | LOMAX G3010099. Exact manufacturer selector configuration: Ford Ranger, 5ft Bed. Match the actual bed and factory rail system; trim name alone does not establish fitment. |
Specifications
| Detail | Value |
|---|---|
| Manufacturer Part Number | G3010099 |
| Series | LOMAX Stance |
| Cover Type | Hard tri-fold tonneau cover |
| Bed Length | 5 ft |
| Panel Material | Extruded aluminum |
| Finish | Black urethane |
| Installed Profile | Less than 1/2 inch above the bed |
| Distributed Load Rating | 400 lb |
| Installation | Vehicle-specific no-drill clamps |
| Warranty | 3-year limited manufacturer warranty |
What's Included
- One LOMAX G3010099 hard folding cover
- Application-specific rails, Tight Bite clamps, seals, and hardware
- Installation instructions
- Truck, cargo, rack, toolbox, and unrelated accessories are not included
About Access
Agri-Cover manufactures LOMAX hard covers and ACCESS roll-up covers in North Dakota. LOMAX combines low-profile aluminum panels, automatic locking, and vehicle-specific clamp-on rails for secure daily bed protection.
Related Parts
- LOMAX replacement seals specified for the exact cover
- Tailgate perimeter seal
- Truck-bed lighting selected for the same vehicle and rail configuration
FAQ
What is the G3010099?It is the vehicle-specific LOMAX LOMAX Stance black urethane aluminum hard folding tonneau cover described here.
What bed length is required?This configuration is sized for 5 ft; verify the measured bed and factory rail equipment before ordering.
Is this cover universal?No. The panel dimensions, rails, clamps, and seals are specific to the applications in the fitment table.
How much weight can the closed cover support?LOMAX rates the panels for up to 400 pounds of evenly distributed weight.
How does the cover lock?Reinforced automatic latches engage as each panel is unfolded, and the release cord can be reached from either side of the bed.
Does installation require drilling?No. The vehicle-specific rails use the supplied Tight Bite clamps.
What is included?The hard folding cover, application rails, clamps, seals, and installation instructions are included. The truck and optional accessories are not.
What warranty applies?LOMAX lists a three-year limited warranty, subject to the current published terms and exclusions.
Installation Instructions
- Confirm the truck, bed length, bed style, and factory rail equipment match LOMAX G3010099.
- Read the current LOMAX instructions and identify every rail, clamp, seal, and panel before assembly.
- Position the vehicle-specific rails evenly and tighten the supplied clamps in the documented sequence.
- Attach the cover, unfold each panel, and verify every automatic latch engages the rail correctly.
- Check tailgate operation, panel clearance, seals, and the folded or vertical storage position before driving.
California Proposition 65 Warning: Cancer and reproductive harm. See www.P65Warnings.ca.gov.
Check the LOMAX manufacturer vehicle and bed selector. Match the exact part number and factory rail configuration.
Access
Shop ACCESS tonneau covers and truck-bed accessories by exact truck generation, measured bed length and factory bed equipment. Compare ACCESS Original, LORADO, LiteRider, VANISH and TONNOSPORT roll-up covers; LOMAX folding hard covers; ADARAC rack systems; ACI bed mats; and compatible cargo and sealing accessories. Every cover and rack is application-specific unless the product states otherwise. Match the exact part number and check notes for deck rails, RamBox, CarbonPro, bedside storage, toolboxes, stake pockets and existing cover hardware before ordering. Choose the Right ACCESS Truck-Bed Product Product family Best for Confirm before ordering ACCESS soft roll-up covers Flexible coverage with broad bed access Cover line, bed length and factory rail or storage equipment LOMAX folding hard covers Low-profile rigid-panel coverage Truck generation, bed length, finish and installed accessories ADARAC rack systems Carrying compatible loads above the bed Stake pockets, rack ser...
View Access Products
Exterior Parts & Accessories
Shop exterior parts and accessories for cars, trucks, Jeeps, and SUVs at Black Ops Auto Works. Explore carbon-fiber hoods, front lips, splitters, spoilers, diffusers, fender flares, truck steps, bed accessories, and exterior trim. Whether you are updating a performance vehicle’s appearance or adding everyday utility to a pickup, choose components matched to your exact vehicle and existing equipment. Carbon-Fiber Hoods and Body Panels Explore Black Ops Auto Works hood designs and selected replacement panels for Jeep Grand Cherokee, Dodge Charger, Dodge Durango, Chrysler 300, and other listed applications. Featured designs include Demon, Sniper, Redeye, and CFR options for supported vehicle configurations. Compare the construction, finish, mounting requirements, and supplied components on each listing. A carbon-fiber appearance does not establish that every product uses the same material or manufacturing method. Browse our Black Ops Carbon Fiber collection for focused shopping. Front ...
View Exterior Parts & Accessories Products
Ford Ranger Parts and Accessories
Shop Ford Ranger parts for bed protection, easier access, suspension projects and brake or engine service at Black Ops Auto Works. Compare BAK covers, AMP Research steps, Bilstein suspension references and Husky protection around the truck you drive. Match exact generation, cab, bed, powertrain and drivetrain before ordering.Bed Covers, Caps and Access StepsBAK references distinguish MX4 folding and Revolver X4s roll-up choices for stated bed applications. Match exact bed dimensions, rails and accessory compatibility. The Westin EXP cap Box 1 title explicitly requires Box 2; review the complete package before planning installation. AMP PowerStep, RealTruck bars and other steps need exact cab and production coverage, while rack-frame-only titles require separate hardware.Suspension and Wheel PlanningBilstein references distinguish newer Ranger 6112 front leveling, 6100 rear and 5100 options from earlier chassis applications. Eibach 2WD, Superlift 4WD and MaxTrac references address di...
View Ford Ranger Parts and Accessories Products