Click to zoom in
SKU: AC6201801NA / UPC: 814849028077
2021-2024 Ram TRX Ditch Light Brackets by ADD Offroad
Equip your 2021-2024 Ram 1500 TRX with the AC6201801NA ditch light brackets from Addictive Desert Designs, built to handle off-road demands while mounting LED pods precisely at the hood hinges. These brackets position lights near the A-pillar for forward or side-angled coverage that cuts through dust and darkness on trails or highways. Constructed from 1/8-inch steel with a hammer black powder coat finish, they resist corrosion and impacts better than plastic alternatives, ensuring long-term use on rugged terrain. Drivers report clearer visibility during night runs compared to hood-mounted options that vibrate or shift.
Key Features and Performance
- Versatile Lighting Setup: Secure up to 6-inch LED pods, including Rigid 360-series, Baja Designs LP6 round lights, or LP4 pod lights, for targeted beam patterns without obstructing wiper paths.
- Low-Profile Design: Follows the truck's body lines to stay out of your line of sight, unlike bulkier mounts that create blind spots.
- Wire Management: Built-in channels route cables neatly behind the brackets, reducing clutter and wear from exposure.
- Bolt-On Installation: Attaches directly to factory hood hinges with no drilling or modifications complete in under 30 minutes using basic tools.
- Made in the USA: Fabricated in Chandler, Arizona, with in-house testing for vibration resistance and fit accuracy.
These brackets outperform generic mounts by maintaining alignment under heavy vibration, providing stable light output that competitors often lose over time. For Ram TRX owners tackling Baja-style runs or daily overlanding, this setup delivers dependable illumination that keeps you ahead.
What's Included in Your Purchase
- One pair: Driver-side and passenger-side ditch light brackets (AC6201801NA).
- All necessary stainless steel hardware for bolt-on installation.
- Detailed installation guide (digital PDF available).
No additional adapters or lights required pair with your preferred 3-6 inch LED pods for immediate use.
Vehicle Fitment
Compatible with the following models for a factory-like fit:
- 2021-2024 Ram 1500 TRX (all trims, including Launch Edition).
- 2019-2023 Ram 2500 (Power Wagon and standard models confirm hood hinge compatibility).
- 2025 Ram 1500 RHO (new high-output variant).
Not compatible with aftermarket hoods or modified A-pillars verify your setup before ordering.
Product Specifications
- Part Number: AC6201801NA
- UPC: 814849028077
- Material: 1/8-inch thick steel plate
- Finish: Hammer black powder coat for UV and scratch resistance
- Weight: 4 pounds (1.81 kg)
- Shipping Box Dimensions: 12 x 4 x 4 inches
California Proposition 65 Warning: Contains chemicals known to the State of California to cause cancer (details at p65warnings.ca.gov).
Order the AC6201801NA today for in-stock shipping and transform your Ram TRX's front-end lighting into a reliable system that stands up to real-world abuse. Backed by ADD Offroad's reputation for durable accessories, this is the direct mount solution serious drivers rely on.
Addictive Desert Designs
Addictive Desert Designs parts and accessories Addictive Desert Designs parts and accessories for Ford Raptor, F-150, Super Duty, Bronco, Ram TRX, Ram 1500, Silverado, Tacoma and Tundra builds are stocked at Black Ops Auto Works. Shop Bomber, Stealth Fighter, Black Label, Phantom and HoneyBadger bumpers, chase racks, skid plates, bed panels, light brackets and recovery hardware. Every product is filterable by year, make, model, trim, engine and drivetrain so the correct part can be selected for the first time. Black Ops Auto Works carries 164 Addictive Desert Designs SKUs across fitment-specific configurations, finishes, hardware and installation needs. What This Addictive Desert Designs Collection Covers ADD builds vehicle-specific exterior protection for aggressive truck and SUV projects. The catalog focuses on steel front and rear bumpers, winch-ready designs, grille protection, auxiliary-light mounting and trail-focused accessories that retain the factory body lines. ADD Bum...
View Addictive Desert Designs Products
Brackets
Brackets and mounting hardware for trucks, SUVs, and performance cars are stocked at Black Ops Auto Works. Shop bumper mounting brackets, light bar and sensor relocation brackets, exhaust hanger kits, leaf spring and track bar brackets, caliper brackets, and roof rack mounting brackets for Ford, RAM, Chevrolet, Jeep, Subaru, and Toyota platforms. Every product is filterable by year, make, model, trim, engine, and drivetrain so the correct part ships the first time. Black Ops Auto Works carries 472 bracket SKUs across bumper, suspension, exhaust, and accessory mounting categories. What This Category Covers Brackets are the mounting hardware that secures bumpers, light bars, sensors, exhaust systems, suspension components, and roof accessories to a vehicle chassis or body. Because brackets support such a wide range of systems, this collection spans multiple vehicle platforms and use cases rather than a single category, from off-road bumper hardware to exhaust hanger kits to suspen...
View Brackets Products
Fabrication
Shop Fabrication Parts and Materials at Black Ops Auto Works for stainless steel tubing, titanium tubing, aluminum charge piping, mandrel bends, V-band clamps, flanges, merge collectors, AN fittings, PTFE hose kits, braided fuel and oil lines, heat shields, welding supplies, brackets, bungs, and hardware for building custom exhaust systems, turbo plumbing, intercooler piping, and fuel system routing. Start with tubing in stainless, titanium, or aluminum in the right diameter and wall thickness, then add mandrel bends, flanges, V-bands, and clamps to complete the joint work. Black Ops Auto Works carries 5,866 fabrication SKUs from Vibrant Performance, Ticon Industries, Stainless Bros, Radium Engineering, Fragola, DEI, and ATP Turbo. Why Custom Fabrication Custom fabrication solves fitment problems that no universal or pre-bent kit can address. Raw tubing, flanges, and fittings give the fabricator freedom to route exhaust around a turbo, snake charge pipe around accessories, hard-...
View Fabrication Products
RAM TRX Parts & Accessories
RAM TRX Parts & Accessories for 2021 to 2024 Ram 1500 TRX trucks with the 6.2L supercharged Hellcat HEMI are stocked at Black Ops Auto Works. Shop cat-back exhaust, cold air intakes, tuners, lift kits, coilovers, suspension parts, front bumpers, body armor, auxiliary lights, programmers and chips, interior accessories, truck protection for 2021 to 2024 Ram 1500 TRX, 6.2L supercharged Hellcat HEMI, desert builds, street trucks, and off-road trucks. Every product is filterable by year, make, model, trim, engine, and drivetrain so the correct part ships the first time. Black Ops Auto Works carries 201 RAM TRX Parts & Accessories SKUs across model year, supercharged engine, factory suspension, bumper equipment, and cab configuration. What This RAM TRX Parts & Accessories Collection Covers This collection is dedicated to the original supercharged Ram 1500 TRX. It brings together vehicle-specific power, exhaust, suspension, protection, lighting, and interior upgrades for t...
View RAM TRX Parts & Accessories Products