AEM 02-07 Dodge Ram 3.7L (V6)/4.7L-5.9L (V8) Dryflow Panel Air Filter

AEM Induction parts and accessories are available to browse at Black Ops Auto Works for Mustang, Camaro, Civic Si, WRX, Silverado, F-150, Ram and other import and domestic performance builds. Shop Brute Force intake kits, cold air intakes, short ram systems, DryFlow filters, replacement panels, intake tubes and filter service parts with vehicle specific fitment data for confident ordering. What AEM Induction Covers Cold Air Intake Systems AEM Induction builds vehicle specific cold air intake and short ram systems that replace restrictive factory plumbing while retaining the sensors and mounting points required for the application. Brute Force and Cold Air Induction Truck and Muscle Car Airflow Brute Force kits support popular American trucks and performance cars with large filter area, sealed or open inlet layouts, and application matched intake tubing for reliable daily driving and towing use. DryFlow Filter Technology Oil Free Serviceable Filtration DryFlow synthetic filters ...

Performance Air Filters and Replacement Filters This collection covers filtration for factory air boxes, aftermarket intake systems, custom intake tubing, crankcase ventilation and vehicle HVAC systems. Start with the installation type, then confirm the exact manufacturer part number, filter media, dimensions and application shown on the product page. Similar-looking filters are not automatically interchangeable. Choose the Correct Air Filter Type Direct-fit and drop-in filters: shaped for a specific factory air box or listed intake system. Universal clamp-on filters: selected by flange inside diameter, base and top dimensions, height and available clearance. Cabin and HVAC filters: vehicle-specific filters for air entering the passenger compartment. Breather filters: compact filters for compatible valve-cover, crankcase-vent and catch-can applications. Pre-filters and wraps: outer covers designed for compatible primary filters in dusty, sandy or wet environments. Velocity...

Drop in air filters and replacement panel filters for cars, trucks, SUVs, and Jeeps are stocked at Black Ops Auto Works. Shop reusable and dry media panel filters that fit directly into your factory air box from K&N, aFe, AEM, Injen, BMC, and GReddy for vehicles ranging from Corvette and Mustang to Porsche, BMW, and Ford Super Duty diesel trucks. Every product is filterable by year, make, model, trim, engine, and drivetrain so the correct filter ships the first time. Black Ops Auto Works carries 1,453 drop in air filter SKUs across dozens of vehicle platforms. What This Category Covers Drop in air filters replace the factory paper filter element inside your existing air box without changing the intake tubing or housing. This collection spans reusable oiled cotton filters, dry synthetic media filters, and OEM style replacement panels sized to fit factory air box dimensions across nearly every make and model. Reusable and Dry Media Options Reusable oiled cotton filters from K&...

Find Dodge Ram 1500 exhaust and body accessories by generation, engine and factory equipment. A 5.7L truck’s bumper outlets, hood style and fender shape affect different parts of the installation. 5.7L Exhaust Routing and Bumper Cutouts AWE 0FG applications for specified fourth-generation 5.7L trucks distinguish bumper-cutout configurations. Match dual rear-exit or other routing to the truck’s actual bumper and exact manufacturer coverage. Compare a complete cat-back with shorty headers and connecting pieces sold separately. Existing headers and pipework should remain part of the installation review; one exhaust section does not establish the fit of every other component. Fender, Hood and Throttle-Control Choices Fender flares require the correct body contours, wheel coverage and attachment. A four-piece package should be checked against existing trim and accessories. A hood-protector application excluding Sport or Rebel should retain those exclusions. For a PedalMonster controller,...

Find Dodge Ram 2500 parts by generation, engine and rear-suspension equipment. Diesel intake components, load-support kits and throttle controls address different systems and need separate application checks. Diesel Intake and Engine Coverage A Banks Twin-Ram application for specified early 5.9L diesel trucks should follow its exact year, engine and EGR configuration. It is not a universal intake for every gasoline or diesel Ram 2500. Compare the manifold-system contents with the existing induction arrangement. Record changed intake pieces and engine references so hoses, controls and supporting connections are included in the plan. Rear Air Springs and Control Packages The listed Firestone rear kit for specified 2003–2012 Ram 2500/3500 trucks requires its own chassis, drivetrain and mounting coverage. Review bracket clearance and existing suspension or hitch equipment. Air-helper springs support the existing suspension without raising the manufacturer’s weight ratings. A PedalMonste...

Choose Dodge Ram 3500 parts for diesel induction, rear load support and accelerator controls. Record pickup or chassis configuration, engine and installed suspension before choosing system-specific components. Rear Load-Support Application A Firestone kit listed for specified 2003–2012 Ram 2500/3500 trucks should be matched to its exact mounting coverage. Check drivetrain, axle and clearance around existing suspension and hitch equipment. Air springs do not increase the truck’s rated capacity. Compare loaded axle weights and vehicle ratings, then follow the selected kit’s pressure and installation instructions. Diesel Intake and Accelerator Controls Banks Twin-Ram applications distinguish early 5.9L engine and EGR configurations. Compare the exact manifold system with the installed induction equipment rather than assuming coverage for later diesel or gasoline engines. PedalMonster changes accelerator response rather than horsepower. Match the connector and control interface, then re...

Find Ram 1500 Classic body and bed accessories by exact cab, bed and trim. Keep Classic applications separate from other Ram 1500 body generations. Cab and Exterior Equipment Crew Cab and Quad Cab deflectors require the correct window/body coverage and mounting method. Compare in-channel fit, supplied pieces and installation requirements. Flares, mud guards and hood protectors need exact trim/fender/bumper support. Exclusions such as Sport/Rebel are application requirements, not appearance choices. Bed Length and RamBox Match bed mats to actual measured bed length, cab and RamBox configuration. A 5.7ft no-RamBox reference and a 76.3-inch bed reference are separate selections. Review mat shape, retention, existing liners and tailgate clearance. Confirm exact Classic production coverage and package contents instead of transferring older Ram titles automatically. Choose Your Part Confirm Classic body, production and trim. Identify Crew Cab or Quad Cab. Measure bed length and record Ra...

Find Ram 1500 exhaust and body accessories by exact generation, engine, cab and bed. Keep new-body, Classic and TRX applications separate before selecting parts. Engine and Exhaust Application Match a 2019–2025 5.7L HEMI 0FG reference to the exact body, engine and exhaust equipment. A TRX-specific catback is a separate application, not a universal Ram 1500 substitute. Compare bumper outlets, pipework, mounting, tip finish and supplied components. Confirm exact part number and installation requirements for the actual truck. Cab, Bed and Trim Fit Crew Cab rocker protection, deflectors and bed liners need exact body/cab coverage. Match bed length and RamBox configuration before choosing a mat or full liner. Flares and guards can exclude Rebel/TRX or other equipment. Review trim exclusions, mounting and clearance rather than assuming every 1500 accessory fits. Choose Your Part Identify body generation and actual engine/trim. Match exhaust routing, outlets and complete contents. Confirm...

Compare Ram 2500 exterior and bed accessories by production, cab, trim and installed body equipment. Confirm exact heavy-duty truck coverage before transferring shared Ram references. Flares, Guards and Hood Equipment Match 2019-on or earlier flare references to actual fender/trim configuration and required coverage. Review finish, supplied pieces and mounting requirements. Hood protectors can exclude Sport, Power Wagon or Rebel hoods. Universal 12-inch flaps require bracket, attachment and tire-clearance checks; they are different from custom-molded guards. Cab Windows and Bed Configuration Crew Cab deflectors need exact body/year and window coverage. Older 1500-labelled accessories require explicit 2500 support, not shared-brand assumptions. Match bed mats by actual length and RamBox configuration. Review existing liner, retention, tailgate clearance and complete supplied coverage. Choose Your Part Identify production, trim and actual hood/fenders. Match custom or universal guard...

Find Ram 3500 body and bed accessories for the actual production, rear-wheel and cab configuration. Confirm trim and fender equipment before selecting shared heavy-duty references. Rear-Body and Fender Fit Identify single- or dual-rear-wheel and pickup or cab/chassis configuration. Flare and mud-guard references need explicit support for the actual body, fenders and tire clearance. Compare molded guards with universal weighted/unweighted flaps by mounting, brackets and supplied coverage. A general Ram label does not establish every rear-body installation. Hood, Windows and Cargo Bed Review hood-style exclusions and exact cab/window application for protectors and deflectors. Earlier 1500/2500 references require documented 3500 coverage. For bed mats, confirm actual bed length, RamBox and existing liner equipment. A pickup-bed reference does not establish a service-body or flatbed application. Choose Your Part Identify production, cab and SRW/DRW or chassis configuration. Match fende...