Sold out
Click to zoom in
This AEM intake system is engineered for 2016-2018 BMW 340i and the other applications listed below, replacing restrictive factory intake components with application-specific airflow routing and serviceable filtration. Confirm the complete vehicle, engine, trim, and emissions notes in the fitment section before ordering.
Key Features
- Air filter lasts up to 100,000 miles before cleaning is required (depending on driving conditions).
- Washable and reusable oil-free filter media.
Fitment
| Years | Make | Model | Application |
|---|---|---|---|
| 2016-2018 | BMW | 340i | Base |
| 2017-2019 | BMW | 340i GT xDrive | Base |
| 2016-2018 | BMW | 340i xDrive | Base |
| 2017-2020 | BMW | 440i | Base |
| 2017-2020 | BMW | 440i Gran Coupe | Base |
| 2017-2020 | BMW | 440i xDrive | Base |
| 2017-2020 | BMW | 440i xDrive Gran Coupe | Base |
Specifications
| Brand | AEM Induction |
|---|---|
| Manufacturer Part Number | 21-880C |
| Product Type | Cold Air Intakes |
| Condition | New |
What's Included
- AEM intake tube or intake assembly shown for this exact part number
Any item not identified above or in the manufacturer specifications is not assumed to be included.
About AEM Induction
AEM Induction develops application-specific air-intake systems, Dryflow filtration products, intake fabrication components, and related induction hardware for street and performance applications.
Related Parts
- AEM 12 Hyundai Veloster 1.6L Gunmetal Gray Cold Air Intake
- AEM 11-13 Mini Cooper 1.6L Black Cold Air Intake System
- Shop the complete AEM Induction collection
Frequently Asked Questions
Will AEM 21-880C fit my 2016-2018 BMW 340i?
This listing is organized for 2016-2018 BMW 340i Base, 2017-2019 BMW 340i GT xDrive Base, 2016-2018 BMW 340i xDrive Base. Match the engine, trim, emissions equipment, and every fitment note to AEM MPN 21-880C.
Does AEM intake 21-880C require an ECU tune?
Many AEM intake systems are designed as bolt-on hardware, but calibration needs depend on the vehicle, airflow-meter strategy, and other modifications. Follow the current AEM instructions for this exact MPN.
Will the factory MAF sensor and emissions equipment remain compatible?
Compatibility is application specific. Confirm the MAF housing, sensor orientation, breather connections, and emissions provisions shown for this exact kit before installation.
What changes should I expect in intake sound and throttle response?
An intake can make induction sound more noticeable and may sharpen response, but the result varies with the engine, calibration, exhaust, and other modifications.
How should I protect the filter from water exposure?
Keep the inlet and filter away from standing water and direct splash. Do not drive through water deep enough to submerge or saturate the filter.
Is the air filter reusable, and does it require oil?
Use the cleaning method specified for the exact filter supplied with this MPN. AEM Dryflow filters are serviced without filter oil; do not assume a different filter media uses the same procedure.
Installation Instructions
- Confirm AEM part number 21-880C, the complete application, and all included components before starting.
- Disconnect the battery when required, then remove the factory intake only as directed by AEM's current instructions.
- Transfer factory sensors, grommets, and breather connections in their specified orientation without contaminating or damaging them.
- Assemble the tube, filter, couplers, clamps, heat shielding, and brackets loosely; align for clearance before final tightening.
- Verify every connection is sealed, reconnect the battery, check for warning lights or intake leaks, and recheck clamps after the first heat cycles.
California Proposition 65 Warning
WARNING: This product can expose you to chemicals known to the State of California to cause cancer and reproductive harm.
AEM Induction
AEM Induction parts and accessories are stocked at Black Ops Auto Works for Mustang, Camaro, Civic Si, WRX, Silverado, F-150, Ram and other import and domestic performance builds. Shop Brute Force intake kits, cold air intakes, short ram systems, DryFlow filters, replacement panels, intake tubes and filter service parts with vehicle specific fitment data for confident ordering. Every product is filterable by year, make, model, trim, engine, and drivetrain so the correct part ships the first time. Black Ops Auto Works carries 193 AEM Induction SKUs across cold air intake systems, dry filters, replacement filters, intake tubing, and accessories. What AEM Induction Covers Cold Air Intake Systems AEM Induction builds vehicle specific cold air intake and short ram systems that replace restrictive factory plumbing while retaining the sensors and mounting points required for the application. Brute Force and Cold Air Induction Truck and Muscle Car Airflow Brute Force kits support popula...
View AEM Induction Products
Air Intake Systems
Shop cold air intakes, short ram intakes, enclosed air boxes, intake tubes, mass air flow sensors, snorkels, scoops, silicone couplers, replacement filters, and intake service components at Black Ops Auto Works. This collection covers complete vehicle-specific intake systems and supporting components for performance cars, trucks, SUVs, Jeeps, diesel vehicles, off-road builds, and custom fabrication projects. Performance Air Intake Systems and Components An engine air intake system filters incoming air and delivers it to the throttle body, turbocharger, or supercharger inlet. Aftermarket systems may change the intake path, filter location, tubing size, air-box design, induction sound, and airflow characteristics. The results depend on the exact vehicle, engine calibration, intake design, installed modifications, and operating conditions. This collection includes products from Legmaker Intakes, aFe POWER, JLT, K&N, AIRAID, CORSA Performance, Injen, Spectre, Granatelli, Vibrant Per...
View Air Intake Systems Products
Cold Air Intakes
Shop cold air intakes, short ram intakes, closed-airbox intake systems, replacement air filters, intake tubes, and MAF housings from K&N, AEM, aFe Power, Airaid, S&B Filters, Injen, Roush, Volant, Corsa, Mishimoto, HPS Performance, Cobb Tuning, JLT, Vararam, Steeda, and other performance intake brands. Find full open-element cold air intakes, sealed-airbox systems, dry and oiled air filters, replacement drop-in filter panels, MAF sensor housings, and complete intake tube kits. Cold air intakes for domestic muscle, sport-compact tuners, diesel trucks, off-road 4x4, Euro performance, and modern sport SUVs Mustang, Camaro, Challenger, Charger, F-150, Silverado, Ram, Tundra, Tacoma, 4Runner, Wrangler, Bronco, Cummins, Duramax, Power Stroke, WRX/STi, Civic Type R, GR86, Supra, GR Corolla, BMW M2/M3/M4, Golf R, and hundreds of additional platforms. Filter by vehicle, intake style (open element, closed airbox, short ram, tube kit), filter media (oiled cotton, dry synthetic), tun...
View Cold Air Intakes Products