-0%
Click to zoom in
Product Overview
AEM 92-01 Honda Prelude Si VTEC/Base & SH Silver V2 Intake from AEM Induction is identified by manufacturer part number 24-6005C. This AEM intake system is engineered for 1993-1996 Honda Prelude and the other applications listed below, replacing restrictive factory intake components with application-specific airflow routing and serviceable filtration. The gunmetal gray aluminum intake tube is configured for the factory interfaces used by this application. Confirm the complete vehicle, engine, trim, and emissions notes in the fitment section before ordering.
Key Features
- Designed as a vehicle-specific intake system; confirm engine, trim, emissions notes, tube configuration, filter style, and every included component.
- New AEM Induction component supplied in the configuration shown and described on this page.
- Exact application, dimensions, and included components should be verified before installation.
Fitment
Confirm AEM Induction 24-6005C against the complete vehicle, engine, trim, and every application note before ordering.
- 1997-2001 Honda Prelude Base
- 1992-1996 Honda Prelude S
- 1995 Honda Prelude SE
- 1992-1996 Honda Prelude Si
- 1992-1994 Honda Prelude Si 4WS
- 1997-2001 Honda Prelude Type SH
- 1993-1996 Honda Prelude
Use the store vehicle selector and current manufacturer application data for final confirmation.
Specifications
| Brand | AEM Induction |
|---|---|
| Manufacturer Part Number | 24-6005C |
| Product Type | Cold Air Intakes |
| Condition | New |
What's Included
The exact cold air intakes product identified by AEM Induction 24-6005C. Additional filters, tubes, couplers, clamps, heat shields, sensors, hardware, or service supplies are included only when specifically shown or stated.
About AEM Induction
AEM Induction develops vehicle-specific and universal intake, filtration, and supporting components for street and performance applications. Black Ops Auto Works organizes each listing by exact part number and available fitment data to support accurate product selection.
Related Parts
- AEM 12 Hyundai Veloster 1.6L Gunmetal Gray Cold Air Intake
- AEM 11-13 Mini Cooper 1.6L Black Cold Air Intake System
- Shop the complete AEM Induction collection
Frequently Asked Questions
What is the 24-6005C?
It is the AEM Induction cold air intakes product described on this page in the listed configuration.
How do I confirm fitment?
Match the complete vehicle, engine, trim, intake layout, dimensions, sensors, and every application note before ordering.
Can I select this product by appearance alone?
No. Similar-looking intake and filter components can use different dimensions, connections, sensor provisions, mounting points, or applications.
What is included?
Only the components specifically identified on this product page are included; related filters, tubes, couplers, clamps, hardware, or service supplies may be separate.
Does an intake require tuning?
Tuning requirements vary by vehicle and intake configuration. Review the product notes and consult a qualified tuner when airflow or sensor behavior changes.
How should I maintain the filter?
Follow the filter-specific manufacturer instructions. Cleaning and treatment procedures vary by filter media and should not be assumed.
Is this product new?
Yes. The item condition is new unless this page explicitly states otherwise.
What should I verify before checkout?
Confirm the application, dimensions, included items, filter type, sensor provisions, emissions notes, and installation requirements.
Installation Instructions
- Confirm AEM Induction 24-6005C and the complete application before disassembly.
- Inspect the component and compare every tube, filter, coupler, clamp, sensor provision, mounting point, and included item before modifying the vehicle.
- Follow current AEM Induction instructions and the vehicle service procedure for removal, installation, fasteners, sensors, hoses, and wiring.
- Keep intake components sealed and routed away from heat, sharp edges, moving parts, and direct water exposure where applicable.
- Check all connections, start the vehicle, inspect for leaks or warning lights, and verify safe operation before driving.
California Proposition 65 Warning
WARNING: This product can expose you to chemicals known to the State of California to cause cancer and reproductive harm.
AEM Induction
AEM Induction parts and accessories are available to browse at Black Ops Auto Works for Mustang, Camaro, Civic Si, WRX, Silverado, F-150, Ram and other import and domestic performance builds. Shop Brute Force intake kits, cold air intakes, short ram systems, DryFlow filters, replacement panels, intake tubes and filter service parts with vehicle specific fitment data for confident ordering. What AEM Induction Covers Cold Air Intake Systems AEM Induction builds vehicle specific cold air intake and short ram systems that replace restrictive factory plumbing while retaining the sensors and mounting points required for the application. Brute Force and Cold Air Induction Truck and Muscle Car Airflow Brute Force kits support popular American trucks and performance cars with large filter area, sealed or open inlet layouts, and application matched intake tubing for reliable daily driving and towing use. DryFlow Filter Technology Oil Free Serviceable Filtration DryFlow synthetic filters ...
View AEM Induction Products
Air Intake Systems
Shop cold air intakes, short ram intakes, enclosed air boxes, intake tubes, mass air flow sensors, snorkels, scoops, silicone couplers, replacement filters, and intake service components at Black Ops Auto Works. This collection covers complete vehicle-specific intake systems and supporting components for performance cars, trucks, SUVs, Jeeps, diesel vehicles, off-road builds, and custom fabrication projects. Performance Air Intake Systems and Components An engine air intake system filters incoming air and delivers it to the throttle body, turbocharger, or supercharger inlet. Aftermarket systems may change the intake path, filter location, tubing size, air-box design, induction sound, and airflow characteristics. The results depend on the exact vehicle, engine calibration, intake design, installed modifications, and operating conditions. This collection includes products from Legmaker Intakes, aFe POWER, JLT, K&N, AIRAID, CORSA Performance, Injen, Spectre, Granatelli, Vibrant Per...
View Air Intake Systems Products
Cold Air Intakes
Shop cold air intakes, short ram intakes, closed-airbox intake systems, replacement air filters, intake tubes, and MAF housings from K&N, AEM, aFe Power, Airaid, S&B Filters, Injen, Roush, Volant, Corsa, Mishimoto, HPS Performance, Cobb Tuning, JLT, Vararam, Steeda, and other performance intake brands. Find full open-element cold air intakes, sealed-airbox systems, dry and oiled air filters, replacement drop-in filter panels, MAF sensor housings, and complete intake tube kits. Cold air intakes for domestic muscle, sport-compact tuners, diesel trucks, off-road 4x4, Euro performance, and modern sport SUVs Mustang, Camaro, Challenger, Charger, F-150, Silverado, Ram, Tundra, Tacoma, 4Runner, Wrangler, Bronco, Cummins, Duramax, Power Stroke, WRX/STi, Civic Type R, GR86, Supra, GR Corolla, BMW M2/M3/M4, Golf R, and hundreds of additional platforms. Filter by vehicle, intake style (open element, closed airbox, short ram, tube kit), filter media (oiled cotton, dry synthetic), tun...
View Cold Air Intakes Products